Can't Believe This Was Installed In MY TRUCK!! Heater Hose Quick Connect Remove And Replace!!

Рет қаралды 36,890

Күн бұрын

Can't Believe This Was Installed In MY TRUCK!! Heater Hose Quick Connect Remove And Replace!! Ultimate Heater Hose Upgrade!! EASY And CHEAP!! This Will Fail Replace It Now!! Heater Hose Quick Connect Replacement!! How To Replace Your Car or Truck's Heater Hose Quick Connect Fitting With a Brass Fitting!! #HeaterHose #upgrade #coolantLeak
** I am an Amazon associate. I make a commission based on sales through my Amazon associate links.**
Heater Hose Quick Connect In This Video: amzn.to/3nNbgnY
Here's A replacement Factory Style Hose I talked about in this video: amzn.to/437h6kl
Here's the actual brass fitting I used in this video (model number is: EPXMA3412): www.homedepot.com/p/Apollo-3-...
www.1roadgarage.com
**This channel is for entertainment purposes only! Do not do what I do. Do not take my advice. I am not a professional. The methods I use may be completely wrong and/or dangerous. Please seek professional help with anything and everything and do your own due diligence (research). Working on cars is extremely dangerous. I am not responsible for any loss of life or limb or property. DO YOUR OWN RESEARCH. THIS CHANNEL IS FOR ENTERTAINMENT PURPOSES ONLY!**
FTC Disclaimer: I am an Amazon associate. As such, I earn a percentage of sales made through Amazon associate links found in the description of my videos and on my website and other places.
00:00 Intro
01:00 Heater Hose Quick Connect
02:10 Brass Replacement Fitting
03:35 Begin Replacement Process
06:12 Final Result
06:57 Conclusion

Пікірлер: 120

@spelunkerd Жыл бұрын

Well done, one of your best. I don't know what GM was thinking, mixing aluminum and steel fittings in the presence of continuous water. Of course it was a long term disaster, done to make the task for assembly robots very slightly easier.

@asherdie 9 ай бұрын

Proper antifreeze mixture prevents. The manufacturers rely on the operator reading and following the owners manual.

@MrBowNaxe Жыл бұрын

Thanks for the update Jimmy! I remember replacing those POS plastic clips on my '97 Suburban. My '99 has them as well and since I don't want to be out in the middle of nowhere when they fail, I'm going to look into doing this to my 7.4!

@1RoadGarage Жыл бұрын

Exactly why I did it. Didn’t want it to fail out in the middle of nowhere. 👍

@BeeShopcs Жыл бұрын

@@1RoadGarage Yeah Jimmy, the small needle in the hose QC to low the flow pressure

@tclott316 Жыл бұрын

Lol. You’re gonna love when that leaks or takes out your heater core. It’s a restriction for a reason. And it’s a quick connect so it takes 3 seconds to disconnect it while pulling the intake off.

@eycchu Жыл бұрын

The best reason to use a restriction in the heater hose is to protect the heater core. On engines that can rev quickly, they can generate pressure surges that can over stress the heater core.

@barrygordon1173 Жыл бұрын

😂😂😂😂😂😂😂😂😂😂

@NvTwist 24 күн бұрын

Yup, a heater core bursting 200°f fluid onto the passengers feet and legs at High RPM stops all the fun.

@brandonkahuna1251 Жыл бұрын

It's about time! Told ya those things are nothing but trouble and heart ache. Lol! Mine has been swapped for 15yrs , zero issues. You'll be glad it's gone.

@1RoadGarage Жыл бұрын

Right on

@leewon4572 11 ай бұрын

That's the comment I was looking for I wanted to make sure there was no issues on doing it with a brass fitting preciate it U.S. MARINE Veteran

@brandonkahuna1251 11 ай бұрын

@@leewon4572 I've never had any trouble with it. Don't have to worry about it leaking either. My fitting was leaking and snapped off in my intake way back then. I was trying to get the broke piece out and damaged the intake unfortunately, so I replaced intake and put in the barb fitting. I wish I had known and could have changed it prior to that to the issue. That's why I try to warn others. I still drive my 98 everyday, even though I got a newer truck. Thanks for your service as well 👍

@andrewthompsonuk1 Жыл бұрын

Nice update. Manufacturers have been trying to do away with clamps and rubber hoses because it takes time to fit them correctly the factory. Also hoses need to be routed correctly so they do not rub or leak. I remember in the old days having to fix up problems with hoses on new cars.

@gueyg3764 Жыл бұрын

Sometimes the restriction is to lower the volume/ pressure before components as not to over pressurize it

@camarokurt Жыл бұрын

I did the exact same thing on my 1998 GMC Suburban a few years ago. mine was in the front next to the thermostat housing. It was also much less expensive to do it like you did, rather than replace the crappy quick connect.

@camarokurt Жыл бұрын

oh, and of course it happened in winter when I needed my 4x4 to get to work in the morning (all rural roads)

@x-man5056 Жыл бұрын

The brass nipple is likely 7/8" Not 23mm. I noticed that heater hose QD when you did the intake gasket video. It does seem to cute by half. When you replace those nipples, always use brass, not steel. Brass is more noble than iron/steel, it won't corrode in that application. Steel will always end up corroded no matter how nice the zinc plating looks. The zinc is scraped right of the threads on 1st install. If all you can find is steel, install it with copper anti-seize. Also, do not over torque them, they are tapered pipe threads. That's a big reason why you shouldn't be using 1/2" drive ratchet/sockets up there, they will help you over torque. Save the 1/2" drive stuff for chassis work. 3/8"drive up there is all you need, and it is easier to work with in confined spaces.

@nicholassmerk Жыл бұрын

I've been there. The threads on those intake manifolds will be half worn out/corroded. You need to clean them up AND use silicone sealant. Torquing a brass fitting in alone will likely not seal it. I put steel Dorman 56237 fittings on my last two with silicone sealant and they worked great.

@stuckinmygarage6220 Жыл бұрын

Good advice. Thank you.

@x-man5056 Жыл бұрын

@@nicholassmerk I wouldn't be silicone there. Copper anti-seize on steel nipples. The nipples are tapered, you might use Teflon tape on a new install but not silicone. The copper anti-seize will prevent the nipple from corroding in place. Silicone will not.

@nicholassmerk Жыл бұрын

@@x-man5056 I understand what you are trying to say, buy disagree. For, example, head bolts are installed with sealant, most typically an ultra rtv. There are other less noble metals inside an engine to be converned about than a single heater hose nipple.

@mtebaldi1 Жыл бұрын

It is a water restrictor limiting the amount of water for cooling. Barbed fitting works great also. Not that your is a diesel but Leroy Diesel sells an aftermarket brass connector with the restrictor that he makes.

@leemp337 Жыл бұрын

the purpose for the quick connect from the factory was: 1. faster vehicle assembly at the factory 2. more profit for manufacture due to time saved. 3. cheaper vehicle for the customer due to time saved. that quick disconnect made sense at the time and only needed to last as long as the vehicle warranty.

@diegojaimes8008 Жыл бұрын

This video came out at the PERFECT time! I was putting seadoo in my suburban and noticed a leak coming from this exact location!! Well i know for sure what im doing now!

@EricErnst Жыл бұрын

That is an extremely common problem with the tbi motors. The fitting is made from a low alloy and crumbles like you said. I'm actually surprised that you chose to eliminate that joint.. since I feel you are very hesitant to change anything from the factory. It should give you years of service life like that now.

@jimmycorbett4611 9 ай бұрын

I was thinking the same exact thing watching this video. I was shocked that he replaced something original GM with something home made lol

@TheMauser98a 11 ай бұрын

I had a 1992 gmc truck that had the same factory fitting go bad.... I agree the quick disconnect is flimsy, I have a 1994 gmc now , that I want to do this conversion to. This video is a great self help tip. I would hate to be stuck on the highway in a storm , trying to fix the old set up, lol. 😂

@proudtexan5513 Жыл бұрын

Outstanding Job!!!!

@Dandoun6191 Жыл бұрын

You're the man love the burban repair vids

@Living_Off_The_Road Жыл бұрын

Love the fact that you are all about that Suburban. Had been couple years now and always loved your content.

@NvTwist 24 күн бұрын

5:06 discovered the why the manufacturer choose that style of fitting.

@mariodorder322 11 ай бұрын

you`ve got so much good idears 🙂

@joelmollenkopf3767 Жыл бұрын

Interesting

@1RoadGarage Жыл бұрын

Thanks for watching!

@joeboonen7421 9 ай бұрын

Dont forget those fittings are on the oil cooler lines as well. just going thru mine at the moment. nice vid!

@gilbertpadilla4496 Жыл бұрын

Good intel sir

@malibuman8941 Жыл бұрын

I had the same exact situation with a 1998 Chevy 3.1 Malibu. They had a lot of plastic fittings that one day your driving and you then find your engine overheating because that fitting snapped off. Got rid of the quick disconnect with a brass fitting and hose.🎉

@troymecey Жыл бұрын

Nice work. I have regularly used barbed fittings but had never thought about the pet fittings- nice call. Do you have a link to the video about removing the broken piece?

@biggo4099 2 күн бұрын

Mine goes right back to the heater core wall is that cool? Gonna attempt this today

@watuzi Жыл бұрын

Better than factory spec! Yeah, baby

@JUKE179r Жыл бұрын

Fel-Pro FTW!!!!

@nicholassmerk Жыл бұрын

I prefer to use a Dorman 56237 fitting and a Gates 28479 myself (for my 1997 5.7L and also on my 1996 7.4L).

@fishntools Жыл бұрын

Alum. and brass = electrolysis? I suspect the orifice size is to reduce flow from the engine back to radiator via heater core, thereby decreasing the engine warm up time which enhances ring life and block dimension stabilization.

@PRO4XKEV Жыл бұрын

Awesome repair. I find myself questioning automotive engineers with my current and past vehicles.

@Richard4616 11 ай бұрын

I did something like that on a 1968 Oldsmobile back in the middle 70’s. It had a plastic heater control valve from the factory. The plastic valve had a restriction in it. My replacement fitting didn’t. Every time I accelerated around the corner from a stop I could hear water rushing through the heater core because water was rushing through the core too fast. I did it as a temporary fix but drove the car 6 years like that. Plastic heater valve, $ 18.00. Brass fitting $ 2.00.

@christophernava6685 Жыл бұрын

My only question did the heater blow hotter? any noticeable difference with the larger inside diameter.

@alphasaiyan5760 Жыл бұрын

That’s the first thing I do to my 5.7 vortec motors in my trucks 👍except I use a threaded nipple and a street 90 then hose clamp the heater hose to the 90. Never have to mess with it again until the heater hose busts because you installed headers and it was too close to them 😅

@philipburrows Жыл бұрын

Hi jimmy First of all ptf tape comes in 2 types, there is liquid and there is gas ptf tape. Plummers tape is the liquid ptf tape veriant. Gas engineer tape is the gas ptf tape. Liquid ptf tape for water, coolent and suchlike that do not use tapered fittings. Gas ptf tape for all gas applications that do not use tapered fittings. Something else brass and aluminium do not form electrolysis, corrode, they are none ferrous metals so are good with each other. Any metal with iron in it as a base element will cause electrolysis as iron reacts with water. The quick connection are for easy disconnection and reconnection in manufacturing and for the dealerships to charge more for labour as if they have to fit pipes the old way with barb connectors and clamps, plus to have the owner change the hoses more frequently than needed. Good work on the replacement and it is far better flow of the coolent with no restrictions.

@1RoadGarage Жыл бұрын

Thanks 🤙

@Matt-cr7yb 11 ай бұрын

Can you let me know what size hose you went back with I appreciate your time the black rubber hose attached to the new brass fitting

@THEDRAGONBOOSTER8 Жыл бұрын

Good move..

@timgruver5932 Жыл бұрын

Did all this years ago on my ‘88 350 Chevy. Dug out the broken threads with a pick. Was a pain.

@arturomacarthur799 Жыл бұрын

Excelente Maestro!!! 😊

@ronflynn9357 28 күн бұрын

Fookin A RIGHT Rage against the Machine

@thekosmokramer Жыл бұрын

these stock hoses are highly known to suddenly break off ontop of the motor leaving only the threads. rough stuff. super great upgrade

@bluzeblast 4 ай бұрын

is the restrictor in the original fitting to reduce pressure on the heater core?

@enragedbacon470 Жыл бұрын

You can actually get the part for a 96+ blazer, which has the proper flow restriction to replace that instead of pipe fittings. Did it to my truck about 10 years ago, still holding up. Not sure if you can buy them new anymore, but I'm sure there are loads of them in dead blazers at the junk yards.

@1RoadGarage Жыл бұрын

Thanks for the info!

@Skunkhunt_42 Жыл бұрын

Yea if that's a fixed orifice for flow control then I'd wager its best to have that in place as too fast of flow will not transfer the qty of heat into the fluid going to the return side of the coolant loop.

@Living_Off_The_Road Жыл бұрын

Did this job for oil cooler lines on my 98 Suburban Now I have zero leaks + all liquid lines can be fixed on the road just in case of an emergency.

@davidcrofcheck4545 6 ай бұрын

Hi Jimmy great video, it's been 7 months have you had any problems with the new part.

@Imwright720 Жыл бұрын

Those fittings have to be pretty old. That was a carburetor I saw, right ❓even brass wears out. I’ve used them and replaced them because the wall got so thin they crack. Nice solution. I really enjoy your video, lots of common sense

@tclott316 Жыл бұрын

Not a carb. Throttle body.

@leewon4572 11 ай бұрын

I don't know if that went through or not but just want to see if that worked and because I want to do the same thing I appreciate this video it helped me out tremendously cuz I don't want to deal with that piece of crap setting so I think you're right on the money so it's shout out I subscribed and I'll pass it along😊 U.S. MARINE VETERAN

@icytrucks206 3 ай бұрын

How did this fix work out for you looking to do this to my truck tomorrow depending on how it worked for you

@stuckinmygarage6220 Жыл бұрын

I wished I had seen this last year 🤔 Nice idea. I like. My old cars have brass nipples. Of course!👍

@nickmizell1141 Жыл бұрын

Do you plan on replacing these on your newer suburban also?

@user-nk7cr7vu4u 5 ай бұрын

What size extractor did you use??

@daftnord4957 Жыл бұрын

i hired my intake gaskets done last summer. Same connector broke

@1RoadGarage Жыл бұрын

Might as well be made of plastic.

@MDAdams72668 Жыл бұрын

That restriction is there to provide the correct cooling to the cylinder head You won't notice any problem until the head gasket fails (and the head is likely warped) Just place a restriction in your hose and poof good fix

@joeybagodonuts9442 Жыл бұрын

what do you recommend for a restriction? how would you install so it does not come loose? TIA

@MDAdams72668 Жыл бұрын

@@joeybagodonuts9442 To do the job correctly ou would have to measure the original restriction and match it

@blairjosephbernard2011 Жыл бұрын

I deleted my Quick connect fittings 2 years ago and put a normal fitting on and never had any problems with it yet

@gearhead7896 Жыл бұрын

You can tell it's a real problem when Lisle makes a tool that can sometimes get the NPT fitting out of the manifold. I changed my grandmother's manifold fitting years ago. I got the Lisle tool and it didn't work and had to pull the intake.

@paulb4496 Жыл бұрын

There is a reason why most plumbing fittings are brass. It is self lubricating semi soft metal that wants to move apart. I removed a 40 year old dishwasher that was installed with brass pipe and fittings. It all came apart like new pipe.

@jewllake Жыл бұрын

I think it is smaller as a flow restrictor to save the heater core form too much pressure?????

@the1andonly Ай бұрын

I bought an old farm truck and I was wondering why there was some kind of guck all over the transmission. It turns out, this quick connect was leaking . Now I have the task of removing the original fitting 😐

@ivanrodriguez9270 9 ай бұрын

I noticed that you don’t have your electric fans anymore. Did I miss something?

@392nightrunner Жыл бұрын

I felt that pain and anguish through my phone

@razif6916 Жыл бұрын

The quick release are for you to use on track day😜

@juanortega2403 Жыл бұрын

Didn't you convert your gmc to electric fans?? Or am I missing something?

@MelodyMan69 9 ай бұрын

That factory fitting looks like a Constant Flow Valve. 👀 So you might have more heat from the heater.

@mintypotato777 18 күн бұрын

you know what else is a "quick connect"? a fkn hose clamp!! been enjoying your videos. going to dive into my 97 tahoe soon. should be a lot of similarities. i think the 97 has the next gen fuel injection tho

@rudybriskar5267 Жыл бұрын

Excellent! However I DESPISE those factory spring clamps. Anytime I can I always change to the stainless steel screw clmps.

@dalemihocik4732 Жыл бұрын

Those spring clamps he used are superior in preventing leaks versus the screw clamp. Smart move he made using them.

@stuckinmygarage6220 Жыл бұрын

Hi, Rudy, Listen to Dale. The proper ( not cheap chinneesium) constant load clamps are far superior and reliable. Even if you fold over the tail end of the screw clamp, you sort of prevent one issue. The temp changes in an engine, plus, the even pressure all around, plus, no damage to the outer skin of the hose... Never on a critical system.

@slalomking Жыл бұрын

Yes you always have to keep tightening the screw clamps every year. Constant pressure clamp is the way to go.

@Bob-fp4qr Жыл бұрын

My '99 has one on the front of the intake as well. Transmission lines, and oil cooler lines have a similar set up. I've often said, Ford engineers infiltrated GM in the 90's. IDK any other reason for such a bad design.

@1RoadGarage Жыл бұрын

Seriously.

@aidenstefanson2175 Жыл бұрын

I replaced the fitting and the clips on my 97, and it weeps coolant in the frigid Canadian winter weather. Thanks for illustrating the fix!

@mintypotato777 18 күн бұрын

it's not so much a matter of it being poor quality metal; just that its dissimilar metal. brass a much better choice. aluminum would be ideal ofc i like the pex fitting. looks like it should "grab" a little nicer than a standard barb

@dondagy9109 Жыл бұрын

My 96 has 440,000 miles, i live in cleveland with winter and salt. I have never had a problem with this piece. I replaced both the hose and fitting at over 250,000 miles just as maintenance from the hose rubber getting weak. Yours was so corroded, i would look at not flushing the coolant when the anti corrosion properties weaken. Most people dont even look at antifreeze condition, unless themselves are a mechanic.

@brandonknight7240 Жыл бұрын

Its a quick connect becouse GM knew they might be into those engines quite frequently

@barrygordon1173 Жыл бұрын

Quick release was for faster factory installation purpose only...not the first company to do so...

@pathslesstrampled9906 11 ай бұрын

Hate those awful quick disconnect fittings. I tried to remove the one in my 97 Tahoe a while back but it seemed welded right into place and I didn’t want to risk something snapping off (like in your video). So I’ve just been swapping out the “guts” of the fitting. I’ve only had to do it twice over the past several years. Truck just rolled over 250K miles last week and has no leaks at all. (From anywhere!)

@thecuss6817 Жыл бұрын

I've had this issue on our 2005; terrible GM engineering, and other makers use similar, for quicker install at the factory.

@CVPI03 Жыл бұрын

wish someone would make a AN solution for it

@Lilmiket1000 Жыл бұрын

lol anyone who has any vehical with this engine has had that heater hose quick disconnect break. It will break on all of them eventually. If anyone has one that isnt broken best to take it off now and replace it with something different.

@lackodhr.5303 Жыл бұрын

🤗👍👌👏👏

@TheIegend27 Жыл бұрын

brass and aluminum will make corrosion there

@MJ-jk9jg Жыл бұрын

That brake booster is waiting to implode...

@davidwildman8474 Жыл бұрын

This is a very common problem with these trucks.

@markbell6864 Жыл бұрын

Galvanic corrosion is headed your way I believe

@stuckinmygarage6220 Жыл бұрын

Brass, bronze, will be fine. Aluminum has physical properties that protect itself, though it can be mechanically challenging. He did not use copper. Correct. Note: Technically, u r correct in that galvanic action does occur, even in the most minute, and for almost all metals. The practical difference is the rate. 😊

@americandinosaursclassicvan Жыл бұрын

That’s things making more money Check new one it’s every where And also those are easy to assemble by robots 😅 to setting in the manufacture

@mark98070 Жыл бұрын

Typical GM!!! They may have saved $0.25 by using substandard materials. To answer your question about why the quick disconnect...It's all about speed and efficiency on the assembly line.

@AngelWolfSoldier Жыл бұрын

pre-2010, Quick connects = absolute fail 2010+ = 50/50...

@victorbaird8220 Жыл бұрын

Why?

@Averagegamer673 Жыл бұрын

For the love of everything that stands PLEASE change your bf all terrain so the white lettering is showing Im going crazy when people buy these tires and decided to go blank it just doesn't look right Please change it😭

@christophernava6685 Жыл бұрын

white walls in! I'm the opposite hate when white walls are out.

@Averagegamer673 Жыл бұрын

@@christophernava6685 you can see them too Dang it jimmy this is the moment you went from jimmy to slippin jimmy Please fix the tires so we can see the whites out please 🥺

@slalomking Жыл бұрын

Dude, white lettering is so 70’s. It’s out of fashion now

@Averagegamer673 Жыл бұрын

@@slalomking 70s ? When you buy a set of 1200 dollar tires your just gonna stick the blacks out Plus whites out give your truck more charter and if you see pictures of old square body suburbans and k1500 and k2500 suburbans you'd see how good this color combo would be White and blue with bfg whites out I agree some vehicles dont look right with white walls or tire lettering but trucks always look good

@christhompson5439 Жыл бұрын

@@Averagegamer673 I agree!!!!! I think the 90s trucks(especially 96-99) need the white letters out...Solid or/OLWT!!! Now, on my 2017 GMC Sierra 1500 Denali (Black walls look best!!! They have 22s on them from the Factory!!!) also, its lower profile tire.... Just my personal preference!!! :)