Can You Ceramic Coat Your Wheels? YES, and Here's Why You Should!

Рет қаралды 52,744

4 жыл бұрын

People often ask me if you can ceramic coat wheels, and the answer is you definitely can! I’ll show you how easy it is and how great it looks.
➤ Armor Shield IX is the best ceramic coating available. Get yours at:
bit.ly/armorshield
USE CODE JASONSGARAGE25 FOR $25 OFF!
➤ Subscribe for car stuff, how-tos, product reviews, garage life, and more:
bit.ly/jasonsgaragesub
➤ If you want to see everything that I recommend on Amazon, I made it easy for you:
bit.ly/jasonsrecommendations
➤ Looking for Corvette lighting upgrades? Use this special link to get 10% off Corvette lighting from Vette-Lights: bit.ly/vette-lights-discount
(Discount applies in shopping cart)
➤ All the cool kids Liked my Facebook page. Are you cool too?
/ injasonsgarage
➤ How's about Twitter?
/ injasonsgarage
▬ ABOUT JASON DEBLER ▬
I have been a car enthusiast since the age of 2. From watching professional drag racing to bracket racing myself and being involved in significant projects with the Chevrolet Camaro and automotive agencies, cars are my life.
▬ AFFILIATE/ADVERTISER DISCLOSURE ▬
My videos serve to entertain and educate car and garage enthusiasts, often through informative and honest product reviews and recommendations. My videos and descriptions will often contain affiliate links, which means I may earn a small commission on a purchase you make by clicking on them (at no extra cost to you, and sometimes I will help you save money).
I retain full editorial control over the content in my videos and will never make a false recommendation as a result of any form of compensation.
If you do purchase through my affiliate links, I thank you so much for your support as it helps me to continue to make helpful and entertaining videos for your enjoyment.
▬ WARNING - DON’T DO ANYTHING DUMB ▬
Standard disclaimers apply. This video is for entertainment purposes only. I assume no responsibility for any damage to watching my videos. Please be careful - the consequences of a mistake could be disastrous.
#jasonsgarage #armorshield #ceramiccoating

Пікірлер: 91

@callmecue 3 жыл бұрын

Did you do the barrels of the wheels also?? I'm concerned about the wheel weights not maintaining adhesion. I' doubt any of the tire installers here know how to prep a surface for wheel weights thats been ceramic coated.

@InJasonsGarage 3 жыл бұрын

Did you watch the video by any chance? 😎. Yes, I did the barrels. That's a fair concern. Most tire jockeys don't even think of it. You can always apply after the weights are added.

@JMacRury 3 жыл бұрын

I just got new wheels and emailed Avalon King about this before they arrived. They told me it would be better to wait until the tires were mounted and balance weights were installed as the coating may interfere with the adhesion of the weights.

@InJasonsGarage 3 жыл бұрын

@@JMacRury They are probably right, and I should have considered this. Now I will double check my weights every once in a while. I may even just remove them, clean the surface with a polish and rubbing alcohol and then reinstall the weights. I am going to PIN this conversation to the top so people see it.

@IDABAYAREA650I Жыл бұрын

*I hate to tell you, working at a Tire shop, we spray brake cleaner inside the wheels before sticking the weights (To remove brake dust) for better adhesion) so id assume brake cleaner might break down ceramic coating a bit so weights can stick*

@AmishGeneral Жыл бұрын

@@IDABAYAREA650I even on a brand new wheel?

@CarJunkie 4 жыл бұрын

Jason, great video! Hope you and yours are all doing well and staying safe right now? I'll add that one of the best things I've done on my car was coating the wheels. Makes clean up so much easier... the added gloss is a nice benefit as well.

@InJasonsGarage 4 жыл бұрын

It is pretty easy and when you think about the economics of it...it is almost the same as detailing your wheels, but you do it once to clean your wheels less...and they look better throughout. Win-win!

@itisaporsche 3 жыл бұрын

Just did my wheels. I used a rubber wheel on my cordless drill to remove old wheel weight tape. Used rubbing compound, then polish. Then Armor Shield. I did the inside barrels too. It took 2 hours for each wheel but worth it. Jason, thanks for the idea and direction.

@InJasonsGarage 3 жыл бұрын

If nothing else, peace of mind is always worth the effort, I say. Glad the video helped!

@MowSow 2 ай бұрын

I just asked this question, how can the double side take of the weight stick now that wheel is ceramic coated ?

@goltzhar 4 жыл бұрын

Nice!. That looked super nice! I also thought it looked like black chrome.... Very interesting.

@InJasonsGarage 4 жыл бұрын

Thanks! The stuff is phenomenal. I knew it was good when I started using it, but honestly, it has surpassed every expectation that I have, and continues after almost two years. It is great on hot dogs, too. Just kidding on that last one! 😅

@JosephNnbs 3 жыл бұрын

Ayee forge star gang

@richymoreno2567 4 жыл бұрын

Hi Jason, quick question. I also just got a new set of wheels. Do you recommend applying it after tires are mounted? Just worried about who ever mounts the tires might damage the coat. Thanks in advance

@InJasonsGarage 4 жыл бұрын

If you got them now and there's time for the coating to cure, I'd just do it while they are off the car as it is a bit easier. Keep in mind, the coating is very very thin, it doesn't have thickness like a clearcoat does and it is rather tough. If your installer it handling your wheels roughly to the point of damaging the ceramic coating, then he will also likely be damaging the paint under it, and you need to find a different installer. 😀

@arunnagarajanie 4 жыл бұрын

Hi jason... great video.. i would like to know whether this armour coating is reliable to apply on the car with some scratches on the paint... my car is bit old... but minor scraches on the body Arun @ ireland

@InJasonsGarage 4 жыл бұрын

Keep in mind, it is crystal clear (see this video: kzfaq.info/get/bejne/d9RioN2ht76akZ8.html). It will not repair damaged paint like scratches, etc. It will put a shine on existing paint, but the better the condition, the better the results are. Hope this answers your question!

@liamleporati3320 3 жыл бұрын

Would you recommend on putting tyres on first before the coating? Or coating then tyres

@InJasonsGarage 3 жыл бұрын

It doesn't really matter, but it might be easier to apply when the tyres are not mounted as they will be lighter to maneuver.

@GOODSATIVA 4 жыл бұрын

Nice wheels I just got some forgestar f14 and I had the option to have them professionally ceramic coated I was just wondering do I have to have them ceramic coated again in the future if s how often?

@InJasonsGarage 4 жыл бұрын

As with the body panels, it all depends. Ceramic coating can wear away just like wax does, but on a much longer timeline because it is just more durable. A daily driver that sees a lot of use with dirty and grime/brake dust will need to be redone more often than a weekend show car. Doing the water test when clean will tell you how well the protection has lasted and if you need to reapply.

@GOODSATIVA 4 жыл бұрын

@@InJasonsGarageok can I use chemical guys hydro slick as a extra layer ontop of the ceramic coat

@paulpitz5881 3 жыл бұрын

Hi Jason, is this will work to any wheel colours? Thanks

@InJasonsGarage 3 жыл бұрын

It sure will, just like it works on different paint colors...plus chrome, polished, etc. wheels.

@truthmatters2020 Жыл бұрын

Hi Jason, thank you for the video, I have a QQ. Is armor shield good for powder coated wheels? Ty

@InJasonsGarage Жыл бұрын

Sure. My wheels in this video are powder coated. You pretty much can use it on anything that is porous and not flexible.

@truthmatters2020 Жыл бұрын

@@InJasonsGarage that k you so much Jason, have a great rest of your Sunday 🙂👍

@jennatyler8144 3 жыл бұрын

Can it prevent rusting and corrosion on chrome rims? If not, what can be done?

@InJasonsGarage 3 жыл бұрын

It is designed to enhance and protect paint and similar surfaces, but I don't think it can protect against further damage/corrosion already in process. You would need chrome polish and sealant for that. I suggest you give this a try: amzn.to/3feBcSK

@MikkoRantalainen 4 жыл бұрын

Here's an idea for a new test: try to put ceramic coating on slightly scratched window. Would it be possible to fix minor problems in the windscreen with this stuff?

@InJasonsGarage 4 жыл бұрын

I don't _think_ it works that way on glass because it doesn't work that way on paint. A neat idea...I should try it and see what happens.

@MowSow 2 ай бұрын

Nice!! But I have a question; you coated the wheel drum, now how is the weight going to stick on so they can balance those wheels !?

@InJasonsGarage 2 ай бұрын

We polished the ceramic coating off where we wanted to put the wheel weight.

@MannyVQ 3 жыл бұрын

My wheels are freshly powder coated. Can I use any rubbing alcohol to prep ?

@InJasonsGarage 3 жыл бұрын

I’d check with your powder coater to be sure that there’s no additional curing time needed. I don’t think it needs it but I’d hate to give you bad info.

@bluestonemetallic7 2 жыл бұрын

….so the ceramic coating before the wheel/tire installation is okay then? No problem/issue with the wheel weight(s) sticking to the coated wheel surface?

@InJasonsGarage 2 жыл бұрын

You have to make sure that where the weights are going to go, the surface is prepped for it. Usually some polishing compound will do the trick. Or, just apply to the barrels after the tires have been installed.

@impactplayr3d 2 жыл бұрын

Can you apply this on wheels that are already on the car and wrapped in tires?

@InJasonsGarage 2 жыл бұрын

Absolutely!

@civic2323 4 ай бұрын

So should I apply my stickers first on my TE47 rims

@InJasonsGarage 4 ай бұрын

Typically a good idea. Ceramic coating makes if very hard for things to stick to. Check out the 4 minute and 17 second part of this video to see what I mean: kzfaq.info/get/bejne/Z9tnZcd6l6_HkZ8.htmlsi=pgHlvtaizIIArSEc&t=257

@mattbritton8201 3 жыл бұрын

Same for bike wheels? Also can it be done with tyres on?

@InJasonsGarage 3 жыл бұрын

Yes, and yes!

@alk1095 2 жыл бұрын

i see now difference on the gloss rims

@contagiousingenuityagency5273 4 жыл бұрын

Hi Jason, nice to know you could use Armor Shield 9 on wheels and glass. I was debating whether or not to cover all windows in my car with it. Have you thought about looking into the X-pel Fusion ceramic coating? How would it compare to the Armor Shield?

@InJasonsGarage 4 жыл бұрын

I did all the windows on my Corvette with it. Cleaning and prep is even more critical when doing that because it is clear, of course, and streaks due to missing an area will be more visible. It isn't any more difficult, you just have to make sure you are thorough. Looking at X-Pel, right away the difference is apparent. Armor Shield is a DIY solution but X-Pel needs to be installed by a dealer.

@contagiousingenuityagency5273 4 жыл бұрын

@@InJasonsGarage Ah, that makes sense. I've seen a few people install X-Pel Fusion Plus themselves, though.

@danvo6668 3 жыл бұрын

How long is the coating last ?

@InJasonsGarage 3 жыл бұрын

I made a video just for questions like this! See this video: kzfaq.info/get/bejne/qcx5act_x8nDZKc.html

@rt_breezy 3 жыл бұрын

My rims are covered in brake dust and water won’t get them clean so what am I suppose to use to remove the existing brake dust so I can use this product?

@InJasonsGarage 3 жыл бұрын

You need to use a good quality wheel cleaner. I would suggest a known name brand. I usually use Griot's Garage, and if you look they do make "Heavy Duty" version that is meant for issues like yours. I'd give that a try. And stop waiting so long between cleaning them! 😀

@rt_breezy 3 жыл бұрын

@@InJasonsGarage i have chemical guys Diablo rim cleaner and I don’t wait long I just have hellcat 5 star concave rims and they get dusty easy

@InJasonsGarage 3 жыл бұрын

@@rt_breezy Yes, I like Chemical Guys stuff as well. That should work. In that case, have you looked into getting different brake pads? That can make a HUGE difference in both braking power and brake dust buildup. Usually factory pads are pretty dirty.

@rt_breezy 3 жыл бұрын

@@InJasonsGarage okay I will use that then and I am looking into different brakes

@InJasonsGarage 3 жыл бұрын

Cool. Let me know what you end up with.

@puch2728 2 жыл бұрын

My rims reacted to the ceramic coating and made a failure and white spots appeared. any chance to reapply to fix problem?

@InJasonsGarage 2 жыл бұрын

Can you define "failure"? Did you prep them correctly and were there any water spots on the surface when you applied it? What ceramic coating did you use?

@puch2728 2 жыл бұрын

@@InJasonsGarage I uploaded a video on my channel, please watch it where I show the white spots occur after coated rims. I used IPA and cleaned thoroughly. Teerwäsche, Vorreiniger B, Sonax Extreme, Valet Pro Shampoo. Applied CarPro DLUX Rim Coating. Rims was stored in a warm garage during winter so it was fully cured.

@InJasonsGarage 2 жыл бұрын

@@puch2728 Checked it out. WOW...that's a lot of spots. I wish I could tell you why that happened, but I just do not know. There's a lot of elements in the equation here. My best advice is to contact CarPro and ask them, and please let us know what they say!

@impactplayr3d Жыл бұрын

So the 91% isoprophyl is 100% safe on the wheels? Sorry for my paranoid self haha.. Also is that safe for car paint or no? I used your code for the armor kit. Just wanted to get everything correctly.

@InJasonsGarage Жыл бұрын

There’s a couple of different schools of thought on this one. The answer is different depending on who you ask. I have had no problems whatsoever using 91% alcohol, but I also use my best judgment on it. I only use it as a light wipe just as a final step to ensure my previous prep steps are covered. Other people say that you should cut it with water, and I can’t say I disagree with that. So do what you feel is best. If you’re concerned about it damaging the paint, it won’t hurt to add a little bit of water to it even up to 50% if you really want to be cautious.

@kevingetrich 2 жыл бұрын

How long do they last?

@InJasonsGarage 2 жыл бұрын

Properly applied, between 2 and 5 years, depending on conditions. See my other videos about it... Top 10 questions I received about Armor Shield: kzfaq.info/get/bejne/qcx5act_x8nDZKc.html Playlist: kzfaq.info/sun/PLq79AIsMUwneaFCtQhUzf2A_XxmaZbZUc

@myroadtours6147 Жыл бұрын

All I have to say, this is probably easier with the wheels off lol I should have pulled my G63 out of the garage to have more room but its cold.

@InJasonsGarage Жыл бұрын

Yep, you can do it either way but off the car is easier.

@MkwShadowFTW 3 жыл бұрын

Can I ceramic coat PVD wheels?

@InJasonsGarage 3 жыл бұрын

That's a good one and I haven't considered it yet. Since you can do any non-porous surface like paint, glass, plastic and chrome, you _should_ be able to without issue, but just to be safe...I'd check with Avalon King. Let me know what they say.

@robertog4351 3 жыл бұрын

How long does the coating last? How often does this needs to be done?

@InJasonsGarage 3 жыл бұрын

I made a Q&A here video here: kzfaq.info/get/bejne/qcx5act_x8nDZKc.html (See the 7:30 mark)

@jaredf.8712 2 жыл бұрын

Ok, year later, how’d they hold up?

@InJasonsGarage 2 жыл бұрын

Wonderfully...but it isn't really a fair answer, because I haven't driven my car much in the past year. I know...some people disagree with that, but I've got my reasons. If you want to see a real world, no BS 3 year test of the stuff, go here: kzfaq.info/get/bejne/o6ekn6eIz5Oan40.html

@joel9873 3 жыл бұрын

I wish someone would do a comparison video with Armor Shield and a few other coatings. I don't like these videos that are basically doing a commercial for the product.

@InJasonsGarage 3 жыл бұрын

Which other coatings do you think should be part of the comparison?

@joel9873 3 жыл бұрын

@@InJasonsGarage Here are the ones I'm most interested in seeing go against Armor Shield IX. Kamikaze Stance Rim Coat 2.0 Adam's UV Ceramic Wheel Coating CQuartz Sic CQuarts UK 3.0 Gtechniq C5 Wheel Armour GYEON quartz Rim Sealant CQuartz Dlux Trim & Wheel Coating

@c50ge 2 жыл бұрын

Jason, do you ceramic coat your hair also?

@InJasonsGarage 2 жыл бұрын

I sure do! It lasts _much_ longer than anything else I have used...even Dapper Dan. Not only that, but I also put it on my Cheerios in the morning. Makes it *reeeeeally* crunchy.

@c50ge 2 жыл бұрын

@@InJasonsGarage 😃 smile 😀

@iyona14granturismogt6gtspo7 3 жыл бұрын

They say you are not supposed to go back and forth...one direction.

@InJasonsGarage 3 жыл бұрын

Never heard that before, at lease not for Armor Shield. The instructions say to go a a criss-cross pattern. Who says that? And why?

@iyona14granturismogt6gtspo7 3 жыл бұрын

@@InJasonsGarage watched 20 tutorials before yours,you are supposed to wear gloves because of the glass particles in ceramic coatings.

@InJasonsGarage 3 жыл бұрын

@@iyona14granturismogt6gtspo7 See the 3:07 mark. Can you point me to the videos where they say to go in one direction? I'd like to see their reasoning behind it.

@BZ1340 Жыл бұрын

After watching this. Looks like I cant drive my car for 48 hrs min.. Plus if its raining out. Take the bus 😂

@InJasonsGarage Жыл бұрын

Ha! Yes, you CAN take it out. It is dust-dry after around 2 hours, and dry to the touch after 5 hours. Just don't get it wet. Side note...I have been testing their new Armor Shield Lite...I was MEGA skeptical...but it does VERY well...and there is no cure time. Check it out! geni.us/armorshieldlite