This is a step by step tutorial on how to remove a defective Top cover Dial Assembly and install a new one in a Canon EOS 5D Mark IV.
Пікірлер: 31
@rackkkham10 күн бұрын
Thanks for your video man, I changed it successfully with your help 🙌🏼
@henribijkerk2 ай бұрын
Thank you very much for posting. Film helped me to do the repair myself.
@j0nthegreat10 ай бұрын
worked great for me! there was one weird bit where you have to put the bottom on before the front. but all in all great tutorial and i'm so happy my camera doesn't suck to use any more!
@nelsphoto Жыл бұрын
My old Mark IV isn’t worth sending in to Canon. This was actually pretty easy. I’m sure a few screws got swapped around and in the wrong place. But it works just fine. Thanks for the video. Would not attempt it without it!
@f1850mm9 ай бұрын
worked perfect! thanks for sharin sir!
@aljdvd2 жыл бұрын
Takes a brave man to do all this!
@luontovalokuva Жыл бұрын
Thank you! I fixed it and succeeded with your instructions.
@TheBlur812 жыл бұрын
Thank you!!! I followed your video and everything works great again. I was able to bypass removing the white wire and work the disassembly with it connected. My only problem is the black screws... I stripped 2 and had to resort to some primitive methods to get them removed. My recommendation is have a good tool set. Mine was a cheap $25 kit off Amazon.. All said, it works perfect!
@gontrandurocher9045 Жыл бұрын
After months of hesitation I took the plunge. Great tutorial, Thanks! To answer (my and) others questions, I used a #00 Phillips -- start with a NEW, good quality screwdriver! Some of the screws, notably on the bottom appear to have loctite or other thread-locker compound on them, and require care not to strip the heads. The rubber grips are indeed reusable, just clean the camera surfaces with alcohol before re-applying. There are 40 screws of different threads and lengths, so good organization is key!
@AJRobinson2 жыл бұрын
Thank you so much for the video I just ordered the part.
@AJRobinson2 жыл бұрын
Update...just made the repair. Thank you!
@thecameradoctor Жыл бұрын
Glad I could help
@KeithDouglasgoggle2 жыл бұрын
Fascinating!
@GrillSergeant3 жыл бұрын
Awesome video...wish I had the guts to try this out. So sad that the shutter wheel is so hard to replace. I got a quote from Canon to do it and it was $420. The part itself is like $20.
@beemarentertainmentltd2813 жыл бұрын
Brilliant stuff Mate. Well laid out steps. In my case I need to replace the bottom pcb and am wondering how much of your steps I should follow. Do you think it's easier once I separate the back cover from the main board? I wish I had the courage like yours. Just wondering if I could give it a go. The quotation I got from the service center is ridiculous £430.00 I got the new part and just need the courage. Well done and thank you for your video. It really did cover much of the steps and will certainly follow it. Really Appreciate🙏🙏🙏
@edquinlan84982 жыл бұрын
John….how do the rubber surfaces get re-attached to the body? Do they stick on their own, do you need to apply adhesive ( if so, what type), or do you need to purchase replacement surfaces. Very impressive piece of work. I am going to give it a shot but warily. Thanks
@thecameradoctor2 жыл бұрын
Hi Ed, The rubber grips can be reattached without any additional glue, just be careful when removing them, do not touch the adhesive side of the rubbers, oil from your fingers can cause them to lose their ability to stick, use acetone or nail polish remover to clean the areas on the body where the rubbers adhere.
@chich39062 жыл бұрын
Please tell me, what screwdriver do you use to disassemble this camera? Thank you.
@dennishensley47033 жыл бұрын
Can you reuse the rubber grip or do you need to replace them? Where can you purchase new ones if you cannot reuse them?
@thecameradoctor3 жыл бұрын
You can reuse the old ones, if you need to replace check ebay.... search for Canon 5D Mark IV parts.
@claudeIsbell10 ай бұрын
Changed it, and working. But the LCD is blank. Won't seem to come on. Anyone have a similar issue? Checked buses(one was loose first time), but they seem OK.
@clemensvanderwerf58532 жыл бұрын
Great video. Where did you buy the replacement assembly?
@thecameradoctor2 жыл бұрын
Ebay: Search for Canon 5D Mark IV Parts
@stevendewberry1637 Жыл бұрын
What tools are needed? Looking for specific size screwdriver. Thank you.
@thecameradoctor Жыл бұрын
Hi I use a#0 x 2-1/2"
@waizfazal Жыл бұрын
I changed my mode dial button (assembly) of my canon 5d mark iii and re-Assembled my camera but now it won't turn on. It sometimes blink a red light but thats it.. ir womt turn on.. any solution please? 😭
@slavatimoshenko Жыл бұрын
this might happen because the buses aren't tight enough. check them all again carefully. also, pay attention that there are two buses one on top of another that you should put back. when I assembled it for the first time, the second bus bends and kinda disappear so I decided that there is only one. rewatched the video and found out that there should be another. and to put it in place you have to watch them both while you put the top back.
@samacochan3 жыл бұрын
Looks like that you don't need to disassemble everything to open the top cover.
@thecameradoctor3 жыл бұрын
Impossible to remove the top cover without removing the body shell !
@paulbauer9834 Жыл бұрын
👌🏽👌😢😮
@antontonton_ Жыл бұрын
I need to replace the top LCD which went out (only lights up, no numbers) would you say the steps are fairly similar? your vid seems the most in depth I’ve found….🤔🫡