CAR NINJA! The Customer Isn't ALWAYS Right

Рет қаралды 61,809

8 ай бұрын

A 2002 R53 Mini Cooper is in the shop. The customer is convinced that the clanking sound from the engine is a failed supercharger.
Jonny soon discovers that the customer's diagnosis is incorrect and the problem is much more simple and ends up saving the customer a lot of money.
CAR NINJA STORE:
car-ninja-merch.myspreadshop....

Пікірлер: 186

@matthewmcmaster2731 8 ай бұрын

Holy crap. When he first pulled the Mini Cooper in I thought that banging racket was coming from the engine. 😱

@danielpalmer9079 8 ай бұрын

Congrats on 100K subscribers Jonny, thanks for keeping up with the great content!

@timothyhays1817 8 ай бұрын

Haha. The title of the video reminds me of a Ross Perot saying. "The customer is not always right, but they are never wrong." Basically, there is a problem.

@kitaecastz4469 8 ай бұрын

In eastern Europe, noone wants to work on minis because everything is packet very tight. Good work

@sirremusrobinson5573 8 ай бұрын

I love the fact that Johnny is turning those wrenches!! That's beyond inspiring to all of us that has a mechanical tendency and are not afraid of picking up a wrench. Just love this!

@matthewmcmaster2731 8 ай бұрын

@@1983dmdYeah, I think the Car Wizzard has slid more into owner mode rather than mechanic. Sad thing to see. Once he started going on about Yachats and stuff like that I've been kind of over it.

@panagiotisharos9625 8 ай бұрын

Regards from Athens Greece...you are the most honest presence in car mechanics... Congratulations..

@danarbuckle6640 8 ай бұрын

I really appreciate the quality of work you do Johnny. From using the correct coolant to using OEM parts to cleaning up a messy engine even though you didn't make the mess. You are the kind of mechanic that I would happily pay the bill and not worry that I was not getting my money's worth. I am a little surprised that you didn't talk the customer into a new air intake hose. Red tape is a dead giveaway.

@markplenty2631 8 ай бұрын

I learned a long time ago not to tell technicians what you think is wrong because some unscrupulous places will do exactly what they say. Love the Ninja's ethic.. nice one!

@krifferb1980 8 ай бұрын

This trick is actually for cactus needles but if you can't get tweezers to grab a splinter try duct tape. You have to do it before it's too embedded but the idea is for the object to stick to the tape and you can pull it out of the skin. Hopefully a helpful tip.

@jasonmacfarlane7885 8 ай бұрын

Gently cut it out with the point of a box cutter.

@ecsolha 8 ай бұрын

You have to give it to those engineers, they do know how to package stuff tight. My first car a Volvo 240. Just pop the bonnet and you could climb in, sit on the engine and reach pretty much everything 🙂 The good old days.

@jayhom5385 8 ай бұрын

Yeah, that part is nice, but I don't miss cars with front ends that have the footprint of the Mini he just worked on. I acknowledge the conundrum engineers have to deal with.

@volvogt21 8 ай бұрын

100k yeehah! You my friend deserve a medal for working on these things.

@dave_n8pu 8 ай бұрын

Agree 💯, I'm old enough to remember the domestic cars that you could climb in the engine bay and work on them and have room to spare, not now days, while these vehicles look pretty on the out side, I wonder what the engineers were on, (smoking or drinking or...) when they designed them. They ought to be made to work on what they design. I wouldn't be surprised they might change a few things.

@ty2007 8 ай бұрын

Johnny is the best. Way better than the "other guy" who complains all the time. I wish my proximity to Johnny was closer.

@itsnotme07 8 ай бұрын

Of course there are 100k other wicked smaht people who love honest content with some fun thrown in! Congrats Car Ninja and crew!!

@mikemoxley9477 8 ай бұрын

Another great video

@lashlarue7924 8 ай бұрын

0:42 The Ninja is a stand up guy, I'd work for him.

@kerrylewis2581 8 ай бұрын

Shoutout to Mike for his video skills. Congrats on 100K

@TorqueTactical 8 ай бұрын

Just a little bit of brake cleaner..hahaha..

@maximeparent3004 8 ай бұрын

As a customer, i did wrongly diagnose my car, but the technician followed my advices and changed the parts. So i was stuck with a 1k bill with the same problem as before. I won't do that ever again.

@christopherrosas2738 8 ай бұрын

Depends on how you present it to the tech..... if you say this is what it is, do only this and nothing else, then technically the tech did nothing wrong, but if you say this is what I think it is, but I could be wrong, the makes the technician actually diagnose and then the technician can still be wrong, but then responsibility lies with the tech

@michaelderkacz5526 8 ай бұрын

If you told them you wanted the part replaced/didn't ask for diagnostic, they did exactly what you asked.

@maximeparent3004 8 ай бұрын

@@christopherrosas2738 The way i presented it is: ''i made my research and i think it is the crank position sensor, but you can check everything else for other issues.'' So he replaced the sensor, the coolant tank because there was a small whole in it, and put a new starter because it was dead. So i can't really be mad at him. Next time i'll just cut it short and say the issue and let him diagnose everything himself.

@grayparatrooper 2 ай бұрын

I bought a whole x5 front suspension control arms the works for a clunky noise, had it all replaced by the tech he goes got it all done but that didnt fix your issue you just need this other part which was like $70 but he had to go back in to stuff he had already done and cost me more $. I would have appreciated he diagnosed it before hand but its my fault i didnt really tell him to but one would assume they would check everything first. O well i have all new front suspension now lol

@Noahkinz 8 ай бұрын

Congrats on 100k Car Ninja!!

@zachhersh8791 8 ай бұрын

savage brake cleaner sprayer

@blaketindle4703 8 ай бұрын

Congratulations on 100K Jonny! You run a clean, professional shop! Best mechanic I’ve had the pleasure of watching work!

@thumperjdm 8 ай бұрын

Enjoying my first cup of morning coffee while watching a new Car Ninja video. A day doesn't start much better than that! Congrats on a well-deserved 100K subscribers!

@PHFilms3 8 ай бұрын

I thought I was the only one who enjoyed watching leaking gaskets with my morning coffee. You must be a BMW owner as well

@thumperjdm 8 ай бұрын

@@PHFilms3 Hehehe....Audi. 😁

@jefferyepstein9210 8 ай бұрын

Congrats on 100K!!!

@houseofno 8 ай бұрын

Congrats on 100k Jonny! It all comes back to that classic question: "If you think you know everything, tell us again why you're paying a specialist for HIS expertise?"

@ralft.1615 8 ай бұрын

Powersteering coolingfan 😂 Who invented that haha

@johnburns6422 3 ай бұрын

Wonderful job makes it so easy watching him and he is NOT afraid to get his hands Dirty , Why not ? it,s part of his Trade . Thanks again ☘☘☘

@djborud 8 ай бұрын

Fun to watch you work!

@ONLYREALSEAGULL 8 ай бұрын

As a customer I'm always right even if I'm wrong I'm always right 😂

@Nothing_to_see_here 2 ай бұрын

I thought that engine knock was a bitchin drum intro at first😂

@davidkroth 8 ай бұрын

Ninja uses the Mountain flex ratcheting wrenches.

@chrisknight3681 7 ай бұрын

Wish I had an experienced mechanic around here. Not just a bmw shop either.

@brucesheehe6305 8 ай бұрын

Keep on keeping on!

@waynekaminski5438 8 ай бұрын

Car Ninja reminds me of the shop I have gone to for the last 20 years (Carlos at Foreign Auto Care in Concord, CA).

@wallacegrommet9343 8 ай бұрын

Minis! A blast to drive, a pain to fix

@rubezahlmountainworks7974 8 ай бұрын

I just go straight to the razor blade to dig out the splinters.

@timothyhays1817 8 ай бұрын

German engineers love their special tools.

@bigmurff6439 8 ай бұрын

I love the way R53 Mini's drive. They drive like little go-karts, but working on the engine is always a bit of a pain. No working room! They also like to leak oil from the crank sensor o-ring, that's common also but must remove bumper and move rad support to get access to it

@moolilyfarm 8 ай бұрын

FYI...while working in a metal fab shop for over 15 years, we used emery cloth sandpaper to remove metal slivers (splinters) ...use different straight line directions of sanding until gone

@windycityben4850 8 ай бұрын

You do good work man! I love giving an engine bay a good brake clean bath after a big oil leak repair 😂.

@ThomasSchick 8 ай бұрын

Congrats 100K! …damn good show!

@stratonarrow 8 ай бұрын

You're an honest man. Sooo many mechanics would've been like "supercharger? ...ok then!" Congrats on 100k subs too!

@GrandMoffJoseph 8 ай бұрын

"the customer is always right" is probably one of the most godawful turns of phrase to ever come into existence.

@scotthutcheson1893 8 ай бұрын

Great work!!!! Your level of patience on these projects always amaze me.

@topdog19945 8 ай бұрын

Just did the driver side CV axle, oil pan gasket #2, and fixed up the exhaust on my 05 R52.

@scottross6652 8 ай бұрын

I enjoy your content, working on cars that are neglected must get frustrating ...

@GrandMoffJoseph 8 ай бұрын

And congrats on 100k, Ninja!

@risinbison1106 8 ай бұрын

That thing leaks oil like the Exxon Valdez.

@OB928 8 ай бұрын

Amazing your shop can stay clean with so many cars coming in leaking like a sieve.

@volvo24091 8 ай бұрын

Grimiest car I ever saw Johnny work on. You could be forgiven for thinking he only works on nice fancy Euro cars.

@overboostn 8 ай бұрын

Mike is like, I'll take editing over working on German cars.

@dougsrosen 8 ай бұрын

You're great Jonny!

@SplosionMovies 8 ай бұрын

I always tell the mechs “it does blablabla” rather than “it needs bleblebleh” cause i’ve been wrong before 😂

@truthboomertruthbomber5125 8 ай бұрын

About 1985 I was a service advisor for a Honda dealership in Decatur GA. There were 2 of us. One day a guy brings his car in and Don is his SA. The guy says he needs his tires balanced. Don writes it up - Balance tires. We were able to do it while he waited. He drives off and is back in 5 minutes raising hell. It got all the way up to the service manager. The guy was livid. I enjoyed Don getting a bunch of grief as he was a jackass. That era of Honda’s had a bad problem with warping rotors. And you had to turn them on the car. The rotor was integral with the hub and the hub was a tight press fit into the bearing. If Don hadn’t been such a dipshit he would have asked why the tires needed balancing and the car would have been properly repaired and all the drama would have been avoided.

@landonhoover4668 8 ай бұрын

When I can't get a splitter out - I use a nail clipper to open it up or remove the area.

@seinundzeiten 8 ай бұрын

that is why customers are not mechanics

@racerboy2212 8 ай бұрын

Another job well done!

@bilborg 8 ай бұрын

congrats on 100K !!! Love the channel. Skills + proper attitude.

@jimcondray4632 8 ай бұрын

Congratulations on hitting 100K! I enjoy your videos!

@scottcornish3462 8 ай бұрын

Congratulations Johnny, I always enjoy your videos and appreciate how professional you are!

@uglysteve1 8 ай бұрын

Thank you for posting this. Love the insights.

@bracklemcgee6299 8 ай бұрын

Congrats on the 100k subs!!! Look forward to all your videos. Keep them coming!

@oiygfdxssfgg 8 ай бұрын

You do great work Jonny

@SpaceTech54 8 ай бұрын

Congrats on obtaining 100,000 Subs!!! Good Solid Content!!

@Bimmerguy88 8 ай бұрын

Well done car Ninja!!!! On to the next one!

@kiwizz2177 8 ай бұрын

Always great videos, Jonny just sticking to his core business and not promoting “junk” like video games , razor blades , coffee, hair growing lotion , wallets and what not. So many car KZfaqrs out there who’ve fallen for that BS , so irritating!

@realcarninja 8 ай бұрын

Most everyone can agree that those ads are a bit annoying. Truthfully, doing them can pay pretty well and most car You Tubers put money into creating their videos (buying cars, tools, parts, travel, etc.) it's not out of line that they take an opportunity to get some kind of return on their investment. It's not that they're falling for anything.

@kiwizz2177 8 ай бұрын

If a car KZfaqr promotes something related to his business, like handy tools , I get it. But if they’re promoting something like jewellery or razor blades , that’s just totally ridiculous and annoying! And lots of them out there doing that BS. If that starts happening only thing you can do is unsubscribe!

@PeterAngles-jq7gr 8 ай бұрын

@@realcarninjait's your channel and your content. This is my first time viewing one of your videos, but you're providing information and should make something off it if you like.

@violinmiata 8 ай бұрын

Try a rare earth magnet on metal splinters. Works a charm unless it’s copper or aluminum

@sjanninck 8 ай бұрын

Thanks Johnny! Love the R53 content.

@TwIn603 8 ай бұрын

113k on a coopers I’ll call that counting your lucky stars usually 💩 the bed at 70k lol. Great channel!!

@fitter70 8 ай бұрын

Awesome job! You should be a teacher...you have so much patience.

@ron8566 8 ай бұрын

Johnny - I’m surprised that you’re not a “glove guy”.

@RandySmith-iz1ml 8 ай бұрын

Thanks for the video Johnny, keep them coming!

@lewisreinhold6398 8 ай бұрын

I love watching your videos Jonny! As the owner of many BMW’s over the decades I can relate! Congratulations !

@BobOMKE858 8 ай бұрын

Congratulations on reaching 110k subscribers. Your work ethic and attitude are a credit to your profession.

@GregVT 8 ай бұрын

Congrats on 100,000!!! 🎉🎊🎈

@markmoore236 8 ай бұрын

I watch your channel and I learn something,is the reason I subscribed

@RealRickCox 8 ай бұрын

Ya can't lump all of us into one box. I've never been incorrect in my diagnosis on my BMW. :D One thing that is always guaranteed.... if it's broken, and it's a BMW, it's going to be expensive.

@JAM_2024 8 ай бұрын

One thing I learned after working many years in the customer service industry, the customer is usually wrong!

@Stahodad 8 ай бұрын

Nice work! No drama....😊

@nosetdirection 8 ай бұрын

I have a 2003 Base and a 2005 S Cabrio, I love the first gen Minis!!

@nosetdirection 8 ай бұрын

Jonny is in Kansas and you are in south Carolina, scammer!!@ClickOnProfile05

@charlesdalton985 8 ай бұрын

Congratulations on the 100K - well earned and well deserved!

@domfer2540 8 ай бұрын

Remember the days you did not have to remove the wheels to work on the engine

@TwoDollarGararge 8 ай бұрын

That's the way German cars are they've always for the most part been designed like this since the 70s

@herrbrahms 8 ай бұрын

Admittedly, FWD cars do require removing a wheel for many major services. Try getting access to the front crank bolt without removing a wheel on a 30 year old Honda and see how far you get.

@JulianKapa 4 ай бұрын

There's room in the front wheel well for the wheel to turn, so there's enough room to fit a breaker bar and socket there between wheel and crank bolt.@@herrbrahms

@superpoon16 8 ай бұрын

I see how small engine bay is not easy to fix at all nice work. Sheer 👍

@therockwellhour3401 8 ай бұрын

Congratulations on 100k subscribers! I have 3 questions 1. Why do you always smell the oil before you pour it? 2. What smell should I be looking for? 3. Is there a specific name for the tool to remove the harmonic balancer. I ask only because your very detailed and you usually have a reason why to do or don’t do. I like your way of explaining the process and your dropping jewels on the audience but left that out and I can tell it’s no longer a conscience thought but automatic instinct. Thanks

@JulianKapa 4 ай бұрын

That was coolant he smelt and poured. Not sure why he smells it because he seems to use plenty of it, so it won't get old on the shelf. After some years of being used, it can smell bad.