I've made an Airless Tire like Michelin UPTIS, using windshield sealant
Рет қаралды 7,504,749
4 жыл бұрынI've made an Airless Tire like Michelin UPTIS, using windshield sealant
• I've made an Airless ...
After Michelin revealed the Demonstration of this new Airless Wheel Technology, I made my own Airless tire.
In my first attempt to make a car tire out of silicone, I used 40 cartridges of acrylic sealant, and the experiment failed :))
In the second attempt, I used a windshield sealant, one cartridge cost 9.99$, and I've used 43.
If you wonder why I did this, the answer is just for fun.
In the first attempt to make a tire, I put the Acryl on the rim in 2 hours.
In the second attempt, I put just 2 cartridges a day it took 20 days to put the silicon on the rim and another one month to let it dry.
If you want to see more videos like this one, write your idea in the comment section.
If you are from Europe, you can order our first car care products from here 👉 carhax.com 🔥🔥🔥
Just a friendly reminder to hit that notification bell, so you never miss a beat of our fantastic content. Thank you for being a part of our community!
Watch also our best experiments:
How hard is a normal car glass compared to Tesla 👉 • How hard is a normal c...
Brake rotors out of Lead, Aluminium, and Copper 👉 • I've made brake rotors...
Defrost your windshield in seconds with this trick 👉 • Video
Tire made out of coca-cola, toilet paper, & sawdust 👉 • I’ve made a tire out o...
I've made a Crazy Cart from a shopping cart 👉 • I've made a drift Cart...
GoPro Inside a CAR TIRE (TIRE vs. 100 NAILS). 👉 • Can This Tire Survive ...
I've made an Airless Tire with windshield sealant 👉 • I've made an Airless ...
Watch also:
Mechanical Problems Compilation [Part 27] 👉 • Customer States & Mech...
Mechanical Problems Compilation [Part 26] 👉 • MECHANICAL PROBLEMS CO...
Mechanical Problems Compilation [Part 25] 👉 • Mechanical Problems Co...
Mechanical Problems Compilation [Part 24] 👉 • Mechanical Problems │ ...
Mechanical Problems Compilation [Part 23] 👉 • Mechanical Problems [P...
Mechanical Problems Compilation [Part 22] 👉 • Mechanical Problems Co...
Here are some cheap tools that I use daily in my workshop:
Plastic removal tool:
-11 pieces removal tool set (I have bought this one for almost 3 years and I still use it)
s.click.aliexpress.com/e/basZfJg8
-22 pieces of a removal tool set
s.click.aliexpress.com/e/_d8Y...
-7 pieces of cheap removal tool set
s.click.aliexpress.com/e/c5FEA6Uo
Torx:
-Torx Screwdriver Set from T5 to T30
s.click.aliexpress.com/e/cdIOzPBK
-Long torx Screwdriver T15 T20 T25 T27 T30(use torx t20 to remove the car exterior door handles almost all cars have this screw)
s.click.aliexpress.com/e/cDOzHHLw
Small Electric Drill Cordless Screwdriver:
s.click.aliexpress.com/e/iAkSGXm
Hooks:
s.click.aliexpress.com/e/bGDvRimM
Flexible Magnetic Pick-Up Tool:
s.click.aliexpress.com/e/btR4NInm
Rubber Eraser disk:
s.click.aliexpress.com/e/_Bf9... (I use this to remove old Stickers and double side tape left on the car after I remove badges)
LED Flashlight:
s.click.aliexpress.com/e/CbIfLBK
Infrared Thermometer:
s.click.aliexpress.com/e/_d61...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
#Airless #Tire #Michelin #testing
@101alexs 3 жыл бұрын
Huge respect for sweeping the road clear of the acrylic.
@Guest-zm9sj 2 жыл бұрын
Press f for repsec
@RimKWithoutTheK 2 жыл бұрын
@@Guest-zm9sj ffffffffffffffffffffffffffffffffffffffffffffff
@kanedillon4107 2 жыл бұрын
i know Im randomly asking but does any of you know of a way to log back into an instagram account..? I was stupid forgot my account password. I would love any assistance you can offer me!
@israelwesley9051 2 жыл бұрын
@Kane Dillon Instablaster ;)
@kanedillon4107 2 жыл бұрын
@Israel Wesley i really appreciate your reply. I got to the site thru google and I'm trying it out atm. Seems to take quite some time so I will reply here later with my results.
@HunterXray 4 жыл бұрын
An idea similar to this might be good for spare tires. So you don't have to worry about checking the air pressure in the spare and then if you forget to check it, you aren't surprised the spare is flat when you need it most.
@GregoVal Жыл бұрын
I have a 12v mini compressor in the trunk
@Fit4C 9 ай бұрын
Jesus loves you alot trust in His death 4 salvation and be saved from eternal hell
@jesuschrist2886 3 жыл бұрын
Round of applause for this man, for how many hours it took to even make this video.
@kylerwinters 3 жыл бұрын
Good thing this channel took his video and claimed it as their own.
@wh4tevercomest0mind41 3 жыл бұрын
Obviously it only took him 10:33 barely even a half hour
@ahyaan2552 2 жыл бұрын
@@wh4tevercomest0mind41i hope you are joking
@wh4tevercomest0mind41 2 жыл бұрын
@@ahyaan2552 run yah pockets
@roblosdoge Жыл бұрын
@@wh4tevercomest0mind41 basically 10 mins for the video isnt like it he sped it up and 10 mins is equivalent to 2 hours.
@wiggy8912 4 жыл бұрын
This man just invented the 100% frosting only cake.
@raymondg.3173 3 жыл бұрын
"Real life test": proceeded to do a burnout 😂
@yoanirribarren5866 3 жыл бұрын
😜
@ESISTTIGER 3 жыл бұрын
Yeah raymond didn’t you know every time you take off your meant to spin em up we’ve all been driving wrong
@swapnilyadav4024 3 жыл бұрын
Seriously 😂
@theguruofyourfatherthataba9604 3 жыл бұрын
No Its Launch Control
@Fade2278 3 жыл бұрын
“Burnout”
@simongoodridge6068 4 жыл бұрын
That looked like hard work, but the end result amazed me, it stood up to the tests better than i could have imagined. Nice job
@allensandven0 4 жыл бұрын
Take it to Bonneville !
@peterzingler6221 3 жыл бұрын
Goes to show how incredible strong windscreen adhesive is
@hughstephenson2957 3 жыл бұрын
I use it to put side trim on the 80s cars I work on..
@Steel-toad-Jack Жыл бұрын
I use it to put wind screens on
@jasonseigfried8941 3 жыл бұрын
Those held up surprisingly well. Looks like you've got a decent temp spare now
@teamidris 4 жыл бұрын
That did a lot of good things I didn’t expect. Like sitting up when it started rotating and having excellent self-damping.
@marventhedepressedrobot4656 3 жыл бұрын
The problem is that the tire is very expensive and and has a lot more material which does not help pollution, and it cannot go so fast because if it does then it can tear from the traction with the ground
@killerdinamo08 4 жыл бұрын
Loved the 'real life test', it made perfect sense :))!
@nj1255 2 жыл бұрын
Held up way better than I thought it would!
@mikem8093 3 жыл бұрын
Holy crap NASCAR is coming for you to make their tires!!! Good job!!!!
@niteraven7333 4 жыл бұрын
One day we might hear about you again when you make it big with your inventions. Pretty cool
@mikebronson9670 4 жыл бұрын
Thanks for taking the time to make this video, I really enjoyed it.
@zinedine2751 4 жыл бұрын
10:10 respect 👏
@repeatagain1789 4 жыл бұрын
Very good that's how inventions are accomplished trial error and dedication!
@Luckykhan1993 4 жыл бұрын
this is called passion of engineering work
@luiszepeda2525 4 жыл бұрын
Engineers have to contemplate physics in what they are doing
@inverted311 4 жыл бұрын
Really cool he cleaned that up... That’s a stand up guy right there 🤙🤙
@mustafabahaj9832 4 жыл бұрын
Your patience is admirable.
@swecreations Жыл бұрын
That you actually balanced it too! I lolled at the tire weights there haha
@ryd1977 4 жыл бұрын
Great concept, experiment and trial video. Keep it up!
@leofibonacci. 3 жыл бұрын
As vezes desafios diferentes custão erros inesperados, mas a persistência eleva sua sabedoria! Parabéns!
@blakeholder1017 4 жыл бұрын
It's cool that you made that yourself and it actually worked that well!
@pickledpigknuckles6945 3 жыл бұрын
Probably the best home made tire ever I have seen
@shadgrind 2 жыл бұрын
Add a tread pattern could be brilliant.
@ssss-df5qz 2 жыл бұрын
Police man: "These tyres are under the legal limit for tread" **gets silicone gun out**
@ramasamyvijayaraghavan6540 3 жыл бұрын
Give him a hand of applause...
@masmainster 4 жыл бұрын
It would be fine for something like a warehouse fork lift or something that never went over 10kph, when the tyre wears down you could just add more sealant.
@georgioocean7629 4 жыл бұрын
The actual tires cost cheaper than that glue
@michaelg7904 4 жыл бұрын
Georgio Ocean That tells us how overpriced a tube of caulking really is.
@toheedsultan8263 4 жыл бұрын
Ok boomer
@watersheep9507 4 жыл бұрын
According to the description it ( sealent) is worth about $430
@StrokedGT 4 жыл бұрын
@@toheedsultan8263 you still say that?
@sammyd7857 4 жыл бұрын
Obviously
@mayh3xx 2 жыл бұрын
When your tire blows and the closest shop is home depot
@shadgrind 2 жыл бұрын
😂
@victorpatterson719 4 жыл бұрын
That is really amazing man. I hope to see your work in the future in stores
@shadgrind 2 жыл бұрын
@Funny Stranger This could easily be ‘engineered’ in to the tyre depending on materials used. Imagine, no punctures!
@user-nf7ur4yb2q 2 жыл бұрын
I think this gentleman can be a good pastry chef.
@AACP25 4 жыл бұрын
worked better than i expected XD
@grrbrr5290 3 жыл бұрын
Actuall car companies should learn from how this guy did a whole section of real life tests which mainly consisted of burnouts
@taimoorshah8230 3 жыл бұрын
I would totally buy an airless tire like this as an extra wheel of course professionally made with advance technology not with windshield sealant. But concept is amazing.
@shadgrind 2 жыл бұрын
A little bit of research and development, and you could easily is these tires for a number of applications.
@MotoRiceVN 2 жыл бұрын
Nothing can compare to the Michelin airless tire if it doesn't have that satisfying shock absorbing structure but I appreciate the effort 👏
@lukemanius 3 жыл бұрын
I like that you swept at the end
@Black.Badger 4 жыл бұрын
I feel bad about him cz all the struggle was in vain in the first attempt... Well done BTW
@handyhippie6548 4 жыл бұрын
if you let each layer cure before applying the next it might actually be a viable method to make an airless tire. come the pockyclipse, i'll have to try it.
@raijin7707 Жыл бұрын
Please update me on the results when you've completed this project. I'm thinking about trying this idea for my e-bike.
@elvisstarlord7121 2 жыл бұрын
That is just crazy! But thank you so much for the share . It was very cool to watch respect!
@ucheucheuche 3 жыл бұрын
In years to come, all tires may be like this. Comments will then applaud this maverick for such vision and research.
@shadgrind 2 жыл бұрын
Michelin are developing a tyre to be ready for 2024
@techboy95 2 жыл бұрын
Nice video! A follow-up with 4 tires, maybe a bit more material, a more round tire if you can make one, and a lot more footage and testing with usage would be amazing!
@torpidparakeet9362 2 жыл бұрын
Thanks bro, I cracked the hub on one of my e-scooters and now it won't hold air when tyre is fitted and I'm far too poor ATM to replace hubmotor. your video just made my day, literally in the parking lot of autostore about to stock up on "magic tire goo" 😉
@shadgrind 2 жыл бұрын
You go for it!
@EuropaWill Жыл бұрын
Fantastic Outro!
@SucceedbyForce 2 жыл бұрын
Impressive for only 2nd attempt!! 👏
@Freekniggers 3 жыл бұрын
10 years later it still hasnt finished curing
@Manhotocu 4 жыл бұрын
The tire is beautiful. It costs a lot of glue, huh. I like your way
@SingingSwampPossum 3 жыл бұрын
Nice job man one of the cooler vids I've seen in a while glad you didn't give up I'm sure it wasn't cheap 😂
@swirlingbrain 2 жыл бұрын
Totally just as good as some retread tire shops around where I live! 😱😬😱
@OfentseMwaseFilms 2 жыл бұрын
Let me spent $1000 on a $40 tyre.
@christianhudspeth3338 Жыл бұрын
I'd like to see where you get your tires from if you're only paying 40 bucks
@yawangle90 3 жыл бұрын
exceptional lateral stiffness of the (non-existent) sidewall, resulting in the superb camber control
@cactus7385 2 жыл бұрын
Congratulations my dear 👍👏good works..
@zain9882 3 жыл бұрын
You gotta give him credit for the effort, I mean 30 days to dry 💯.
@Georgesaltas 4 жыл бұрын
perfect tire to put it on the market does not pop if pierced holds for a long time a good patent
@Youtubeforcedmetochangemyname 4 жыл бұрын
That held up a lot better than I thought it would
@tea4223 4 жыл бұрын
This is a great idea for riding mower tires and wheelbarrows.
@raymiemac71 2 жыл бұрын
It's just like filling the tyre with tyre weld but with out the tyre.. Good effort.
@gunpringer2342 3 жыл бұрын
That was cool, but seems like common tires more durable than glue tires
@blacklight481 3 жыл бұрын
thats why all that is needed to be done now is to add a conventional tire layer to roll on the ground.
@pineappleboi27 3 жыл бұрын
Bruh obviously this was just for fun🤦♂️
@marventhedepressedrobot4656 3 жыл бұрын
@@pineappleboi27 bruh obviously it was a joke 🤦♂️
@aharrisbham 3 жыл бұрын
If my jack made that noise letting it down I'd be in bed with it.
@Rojao 4 жыл бұрын
Amazing test, tks 4 share!
@therealgerold Жыл бұрын
9:25 wow, really impressive, got yourself a winner here; that airless tyre sprung up like a real air one. Maybe an idea to design a 3D printing program for this to save yourself time if you'd ever go big market with this one. I'd say, somehow stick a tyre tread around it, that'll take care about your wear and your dealings with wet conditions and whatnot. In the future also off road tyres like these available?? I hope to see more of this.
@stun9771 3 жыл бұрын
Layers of hessian, and expanded steel between layers would have been good...
@VishalJdhv 4 жыл бұрын
Keep experimenting untill u get to the level of Michelin tires..good luck
@varman001 4 жыл бұрын
excellent experiment!
@donnald5169 3 жыл бұрын
Wow ,you can buil one tire for off road ...amazing
@ephramrafael7140 3 жыл бұрын
5:49 I lost it at the pile of tire weights as the wheel rotated around...
@shadgrind 2 жыл бұрын
C’mon man, he knocked it up using ‘black acrylic’ I have just seen the Michelin test, now if you were to do a more precise job using a more measured approach, then this could seriously work, for someone, just ‘having a go’ I am amazed, as far as the comments of it not being round enough, just think of the increased contact patch. Get a tread pattern bonded to it and you have a winner I am massively impressed by this even working. I mean a burnout and it didn’t fly apart!
@jeffreyhull7784 4 жыл бұрын
I bet your arm looks like Popeye's now.
@autobez3132 4 жыл бұрын
Am doing this to all my wheels lol awesome video
@executive 2 жыл бұрын
At least you will never get lost. Just follow the trail it leaves all the way back home
@effreyjeppstein4673 4 жыл бұрын
I feel like 3d printing is the future of this tire type
@pbaklamov 4 жыл бұрын
Hi Epstein, how is Israel? Thanks for letting us know who whistle faker is
@bobordewald1367 4 жыл бұрын
These would be great for use in a salvage yard. It seemed like we popped tires every other day on our yard cars
@crimescene25 4 жыл бұрын
this would last maybe a day tops on any vehicle lol.
@tahabuddy4508 2 жыл бұрын
Thumbs up for your hard work 👍👍
@outdoorbikingbrothers5223 3 жыл бұрын
Appreciated for your experiment and effort
@Zachchase76 4 жыл бұрын
Hillarious when he walked in the the first one like it blew its own brains out
@scoutsapp5624 4 жыл бұрын
@Zach Chase oh my gosh that’s my favorite comment on KZfaq 😂
@Beaverj420 4 жыл бұрын
Now for the 60-0 mph brake test.
@Detroitblue 2 жыл бұрын
I think that it held up suprisingly well.
@oliverlee666 3 жыл бұрын
Good idea sir !!! Appreciate Greetings from Indonesia
@alfredhmr3364 2 жыл бұрын
The movement of the tire spinning while transmission driving looks uneven. Much improvement is required. Welldone! Try more something with patience. Success will results at the end of more attemps made by you. Full support. Try to test the durability. Try to know how long it could last. You'll surely have the patent ownership. Wish you best of luck.✌👍🙏🌹
@xrismanessa3993 4 жыл бұрын
Bugatti need your contacts as they want a Chiron 600 km tire. Pass with flying colors
@instantjustice164 4 жыл бұрын
Brilliant! we should call this 👍👍👍
@bigkahuna2048 3 жыл бұрын
Awesome spare tire
@alexlribeiro 4 жыл бұрын
Congratulations, excellent, a tip try to lay some fiberglass layers, or do with 3d printer (ABS) with fiberglass layers, I made it to Bike and it lasts a lot. hug
@AmaroqStarwind 4 жыл бұрын
You should try making a wheel that drives itself.
@vinayakpatil355 2 жыл бұрын
Me- Mom make me a Windshield sealant only cake this time on my birthday. Here's the recipe.
@sunilchowdary566 2 жыл бұрын
Nice experiment
@afrosamuri05 4 жыл бұрын
Use it as a spare tyre, cuz at least you don't have to remember to inflate it like most of us forget to.
@shadgrind 2 жыл бұрын
Fucking Right!
@TET2005 3 жыл бұрын
6:53 Oh shit... this looks and sounds like a tank moving...
@arvinddhiman8706 3 жыл бұрын
i respect your Dedication man 😊👍👍
@DarkCloudll Жыл бұрын
Oh he's making a cake, man that's not hard!
@Ibaddhusain 4 жыл бұрын
good concept
@TheSteph1979 4 жыл бұрын
That's mint good on you for trying 5 stars from me
@atomicsquirrelproductions6662 2 жыл бұрын
Interesting...I do like the fact that he cleaned up the debris vs just leaving it there to be washed in the sewer.
@stefdnk4428 4 жыл бұрын
Looking solid! 😝
@thomashenden71 4 жыл бұрын
His hands must have hurt because of all the pumping of those sealants... :-o
@racer67 4 жыл бұрын
This is originally wat utube was made for! And ofcource cats!
@raspiankiado4658 3 жыл бұрын
We'll ignore that dogs are looked up more than cats.
@racer67 3 жыл бұрын
@@raspiankiado4658 ha really n where do u get that info from,,"fk dogs" they stink n smell like shit period point blank! n thats a fact!
@Quagigitymire 2 жыл бұрын
that's a really bold title man... im certain the engineers at Michelin will appreciate the comparison after seeing your on par craftsmanship.
@tbiggemz5028 4 жыл бұрын
Nicely done!!! 😎👍🏽
@salemsabah6993 4 жыл бұрын
Your idea is amazing but you need something to protect the last layer like a normal rubber tire
@Carhax 4 жыл бұрын
I've made it just for fun but thanks for the advice
@shadgrind 2 жыл бұрын
@@Carhax Proof of concept
@TVBlindBonsai Жыл бұрын
@@Carhax How do you Uploaded this Video is 3 Months later?
@Carhax Жыл бұрын
@@TVBlindBonsai what do you mean?
@blackspades0000 4 жыл бұрын
I want to see him do some high speed cornering on the hoghway.
@Islamic7636 4 жыл бұрын
Outstanding bro keep it up👍🏻
@alejandroariola9459 2 жыл бұрын
bueno yo no ablo ingles pero siempre tus videos los miro dios te vendiga y tambien al que este viendo esto
Carhax
Рет қаралды 7 МЛН
TFLoffroad
Рет қаралды 112 М.