Carnage - The V8 Lexcen Build is Back!... Then We Find a Big Problem

Рет қаралды 28,972

Жыл бұрын

It's finally time to drive right into the Lexcen build by putting together our 1UZ engine, but we immediately find a problem that needs solving.
Street Machine Carnage is all about having fun with cars. Sometimes it's serious performance, sometimes it's crazy fun, but it always interesting and done on a budget.
If you wish to send the Carnage team fan mail, mail to:
Street Machine Carnage
Unit 9/3-5 Gilda Ct, Mulgrave VIC 3170
Subscribe to Street Machine for V8-powered good times
secure.whichcar.com.au/street...
Street Machine is Australia’s number-one modified car magazine, bringing V8 and six-cylinder powered good times since 1981.
We live for tough street cars, and the guys and girls who use them. Our channel features event coverage from all over Australia, including burnouts, drag racing, dyno competitions, show ’n’ shines and high-quality technical videos.
So follow along as we bring the magazine to life, and remember to check back regularly for new videos. www.streetmachine.com.au
Sign up to our free newsletter: www.whichcar.com.au/streetmac...
Facebook | streetmachinemagazine
Twitter | / streetmachine1
Instagram | / streetmachinemag
TikTok / streetmachinemag
Join the conversation: #streetmachinemag #streetmachinetv

Пікірлер: 240

@jamesbaylis9438 Жыл бұрын

And down the rabbit hole we go 🤦🤦🤣🤣. Don't worry Scotty, we're all here for the journey.

@Il-bebbux Жыл бұрын

I've jumped in head first and now I'm strapped in for the ride

@piffiiiiiiit Жыл бұрын

I love a good rabbit hole

@keeshybeck4014 Жыл бұрын

Yes here we go let do this 😅❤

@terrytzones1215 Жыл бұрын

What a way to wake up on a Friday Morning V8 Lexcen Build love your work Scotty💪

@gavinb9627 Жыл бұрын

So it's situation normal, hurry up and wait. A new project, with the same issues we all have, the patience testing parts wait. So we all get to sit back and relax, while Super Scotty does his majic problem solving. All things come to those with patience. Keep up the great content Scotty.

@cjwallow Жыл бұрын

I watch you guys simply for the episodes like this one! Every time I get work done on my car this sort of thing happens! Ya find what ya can’t see, ya chase parts that aren’t about & in good time good things do eventually happen just never what ya planned is all! Car Life!

@RypienGT Жыл бұрын

Wonder if all of the Commy yobs will watch these videos, with this car being a Toyota and all ....

@jaredrule1431 Жыл бұрын

“This is the way” we’ll said Mando 😂 Love a good 1UZ turbo. Had one a few years ago. Manual box, fitted in a Mazda Ute. So much fun!

@jrbuch Жыл бұрын

This build is going to be epic. The 1UZ is a monster of an engine once it's fed some boost, but pretty underwhelming in standard form with the 4spd A340.

@designeddifference6907 Жыл бұрын

Well done on the “this is the way” ode to Mandolin Scotty… you always find a way to drop in the Star Wars tribute. Love the vid..

@wobblysauce Жыл бұрын

Or a dot.

@xozindustries7451 Жыл бұрын

It’s been so long I had to go back and rewatch the old episodes! I’m glad you’re back on it, if it was me I’d buy new rings and pistons, you know you’re going to be turning it up later. Great work guys

@imidsikkey Жыл бұрын

Happy to see this car back on the show!

@TankyMcStagger Жыл бұрын

I have a Soarer pretty much identical to the donor car. Looking forward to this build because I'll be adding a turbo too 😄 Will definitely be paying close attention

@TheNuggetProject Жыл бұрын

Rumour has it Scotty's video guy has a factory manual vvti 1jz soarer ;)

@Tonyflags3323 Жыл бұрын

Good to see this project back Scotty!

@leroybrown6946 Жыл бұрын

Another top video Scotty and crew, it's a great way to wake up to on my Friday morning

@dazaspc Жыл бұрын

The 1UZ was one of the very few engines made for a car that the manufacturer designed well enough to be built as an aircraft engine. Toyota went a long way towards getting it certified for such use but never saw it through due to cost. The only OHC V8 I would ever consider for a long term OHC v8 swap.

@351tgv Жыл бұрын

ever heard of any issues with the Ford "Romeo" 4.6L Quad Cam 32-valve v8 that was here in the 2001 Tickford Mustang then again those engines were not pushing big power (by todays standards)

@dazaspc Жыл бұрын

@@351tgv Aussies got them in a 5.4 in 3 &4 valve variants Mod Motor?. Good engines but way to big up top. Toyota is a bit more compact.

@andrewkirk8687 Жыл бұрын

The ford coyote/Miami ford V8s are damn good engines. Especially with boost, the Harrop blow FPV spec ones come factory forged bottom end.

@ozzylambo8793 Жыл бұрын

@@andrewkirk8687 don’t ever compare a ford to a Toyota ever again 😂

@andrewkirk8687 Жыл бұрын

@@ozzylambo8793 go drive and Miami powered car and come back to me then mate.

@TURBOTRISTO Жыл бұрын

Awesome this is a great swap!

@Devastator0 Жыл бұрын

Another great video Scotty! I completely agree with your mentality of doing it right! The Lexcen deserves to be done well. I can't wait to see the car turn out great. Keep up the good work as always mate!

@mahcooharper9577 Жыл бұрын

Really looking forward to seeing and hearing this thing in action.

@Blackbirdrod81 Жыл бұрын

Nice Scotty. I have been eagerly awaiting this build. Looking forward to the next episode.

@DarrenBoxhall Жыл бұрын

Im excited to see this one mate. Spewing about the rings. I reckon you made the right choice with not running that gap for sure.

@bry40l Жыл бұрын

4:41 ring gaps are always a good thing to set before going stupid anyway 😎

@themoderndayvintage7935 Жыл бұрын

Hey Scotty, I'm working 2 1uz builds at the moment and I just found some info about shaving 60 thou off the piston heads and running a thicker commetic head gasket you can get the comp ratio down to 8.5/1 for boost. I'm doing that to one of my engines and seeing what figures I get. Looking forward to future eps 🤙🏼

@STREETMACHINETV Жыл бұрын

As Alan from Skid Factory says its not the 80s any more. E85 likes compression

@UFOSorceryEngineering Жыл бұрын

the Lexcen Resurrections Nice Video Mate, We're all behind you for this Wonderful FriYAY .

@darrylcampbell4411 Жыл бұрын

Thanks Scotty. I learned a thing or two about rings and the gaps. Cheers Bro. Good luck with the build. Very refreshing.

@mickc8738 Жыл бұрын

I've been amped for this build for so long! Yes do it right do it once.👍

@jamesmartin9898 Жыл бұрын

Nice work bro. Love watching you build the engines. Very knowledgeable. Chur

@stuartclements9290 Жыл бұрын

I supplied parts and technical advice on a blown methanol 4ltr lexus engine for a circuit boat now drag engine. 8/71 blower. Rods were small journal 5.7 inch chev scat rods . JE Pistons with total seal rings. Crank ground to suit rods. Made 1350 HP on the first engine dynamics pull. Running rich. Yes big $$ spent but great results. Cheers.

@crackdbrain34 Жыл бұрын

It's a bit sad your ring was too big Scotty 😂 hopefully you get it sorted

@richoman3400 Жыл бұрын

It's still a pretty cool project Scotty, can't wait to see it 👍👍

@neilperry2224 Жыл бұрын

You ought to call the ‘long roof’ Lord Lexcan, as in lord Lucan, as it was a mystery that it got forgotten.

@markludwig3759 Жыл бұрын

Hi Scotty, Thank you for the technical detail, your reasoning and the clarity in your explanations. Great tuition. Cheers.

@louiemoretti3533 Жыл бұрын

Excited to see this build happen!

@gogetem188 Жыл бұрын

thanks scottie as informative as always good job

@dmax9946 Жыл бұрын

The real challenge will be finding a stock V8 VS commodore to race against. Good to see this build

@351tgv Жыл бұрын

lol this is gonna eat the 304ci GMH motor alive. If only Toyota back then had the balls to put the 4.0L V8 Quad cam into the Lexcen the bogans might of went hmmm, GMH v8 or Toyota V8 it would of also shirt scared Ford which were using the 302ci Windsor instead of using the big boy 351ci which FORD did have access to but chose not to use it. But that is the past, the future will see this V8 Lexcen wagon be one of the best CARNAGE project builds done.

@craigsampson3386 Жыл бұрын

@351tgv unless it was a HSV V8 lol especially the blue printed stroked one making 226kw/507nm vs 1UZ's 196kw/353nm 😜 The more common VS HSV V8 though was the non stroked 185kw/400nm one, so weighs around 25kg heavier than a 1UZ engine and 10kw less, but makes 47nm more torque. Now that would be pretty closely matched.

@DodgyBrothersEngineering Жыл бұрын

I told myself I wasn't going to watch the Lexcen videos because I wasn't interested. Yet here I am clicking on the button to watch the video. Although I don't know if it isn't more a case of getting my weekly dose of Scotty, than it is seeing the build. Either way the videos going to get watched, I'm hooked.

@STREETMACHINETV Жыл бұрын

Thanks for watching

@terjejohnsen3651 Жыл бұрын

Just love this build this is the way. I want a twin turbo 1uz in my crown 2007.

@defcon1ss Жыл бұрын

Nice one Scotty, pretty pleased to see this following the Trolvo for my own 1uz+t Volvo.

@stevezurek7281 Жыл бұрын

Been waiting a while for this one ,Yep there’s always something going pear shaped.Classic carnage .🇦🇺👍👍👍

@Beer_Dad1975 Жыл бұрын

Love the 1UZ - used to have a UZZ30 Soarer back in the late 90's that I sold my mid-20's soul to purchase, but had some of the best weekend adventures (with random girlfriends) in my life in - that ultra smooth V8 - I don't know how Toyota did it but it was smoother than a lot of inline 6's or even V12's. These days I have a 1UR-FSE Lexus, and again, what an engine! Smooth as the 1UZ, but also makes decent power even N/A, and much more fuel efficient. Of course now I'm married with kids so no more weekend adventures. I've seen the 1UZ make mad power even N/A though in oddball applications like speed boats.

@STREETMACHINETV Жыл бұрын

They're an interesting engine to be sure

@Beer_Dad1975 Жыл бұрын

@@STREETMACHINETV Back in the 90's even in the chubby Soarer it wasn't a slow car - as I recall mine would manage a sub 7 second 0-100 and low 15 quarter (which these days is slow as fuck, but back then was pretty decent). Given it's a fairly stout bottom end and reasonable rods + the 4 litre displacement, should be possible to get a chunky torque curve out of it even at low boost? I remember seeing one in twin turbo guise in the early 2000's in the Rally of NZ - can't remember how it did though, I was just impressed by the engineering.

@albundy6976 Жыл бұрын

Hold on because this is going to be awesome.

@123chrispapa Жыл бұрын

the 1uz was also made for light air craft planes made to be reliable and consistent

@jasonmc4460 Жыл бұрын

About bloody time, I was looking last week if you ever made new episode about the Lexcen.

@genmaxpain Жыл бұрын

no when heads were removed the water went on top of pistons then it sat eating out the bores, that happened to me on a 4g64 engine that had mint bores, then my engine sat for 6 months then when checked and turned over the bores were damaged by the water sitting around the rings also the water damage only sits at the lowest point, a clear indication of water damage always blow the water out past the rings then oil the bores and turn it over so the oil is around the rings and in the bores to prevent damage

@brendannunya77 Жыл бұрын

Love the lexan content scotty

@cuttsick8333 Жыл бұрын

There was a vs lexen getting round adelaide a few years ago that had been 5 litre and calais swapped... had lexus badges all over. Decent paint job too.

@philgrimsey3637 Жыл бұрын

Another carnage car I'd love to drive round in and annoy the hell out of the Golf R/ Audi S crowd. You guys are awesome.

@chrishall8142 Жыл бұрын

Lay the rings on something hard and flat then hit them with a hammer a couple of times it should stretch them enough to get the end gap you are chasing .. works every time

@STREETMACHINETV Жыл бұрын

LOL

@jc7654 Жыл бұрын

I'm liking this build scotty, should be good.

@mayflowerlash11 Жыл бұрын

The moment of resignation. Throws the in the towel. LOL Welcome to Scott's engine rebuilds. That's life Scotty, did you really expect it to as you imagined? No, no, no, there's always something too upset the plan. Go to Plan B. Cheers.

@Bigcountry_littlelegs Жыл бұрын

Nice job

@deankdx Жыл бұрын

Cartune NZ Has HEAPS of videos on identifying and fixing issues with the 1UZ even rebuilds the standard ecu and can remove the security etc on them.

@STREETMACHINETV Жыл бұрын

I've seen some of his stuff

@geoffobrien1300 Жыл бұрын

Going to love this content.. have a 1uz in the corner of the garage which i need the motivation to proceed with and am very much looking forward to your tips ! FYI if my math doesn't suck that's 7.2 thou per bore you had on the Hastings ring, less than what Richard goldener runs in his turbo LS test mules, your call though!

@STREETMACHINETV Жыл бұрын

Richard tends to go all out, we're going mild boost on this

@The3TGTE Жыл бұрын

About time...... been waiting for this car to get done....

@Greyghost_138 Жыл бұрын

Looking forward to this one 👻

@mayflowerlash11 Жыл бұрын

This is The Way says the philosopher. Go Scotty.

@mysticgreg Жыл бұрын

Being a Ford guy, I saw that this video was on "351" likes and had second thoughts about mashing the Like button... but then hey, for Scotty, I got over it and clicked away :D Another great video as always, can't wait to see this on the road.

@STREETMACHINETV Жыл бұрын

Thanks

@dantheflyinman1576 Жыл бұрын

Nice ❤

@chefcamsey1375 Жыл бұрын

Nice one

@brandonshuttleworth1293 Жыл бұрын

Nice work Scotty love the videos bit disappointed you didn’t bust out the dingle ball hone the only way to go for a home job

@STREETMACHINETV Жыл бұрын

Hard to get here in Australia

@mypootrol Жыл бұрын

What do you mean "it's not the carnage way" Doing rods and pistons now would mean you only do the engine build once, If it ain't done more than twice then it ain't done right, is the carnage way. #shiftermafia 💪💪💪 More engine builds, mean more videos and more KZfaq money.

@colinmiles9390 Жыл бұрын

How’s the new VN Berlina engine coming along? Get wait to see the upgrade in the sedan as the old 3.8 must be getting a little tired in its upkeep

@stevessaws3612 Жыл бұрын

Nice work 'mud fist' Scotty

@DSRE535 Жыл бұрын

Remember when your honing make your strokes Fast as you possibly can, otherwise your cross hatch will be too horizontal, all you are basically doing is deglazing but you still want that crosshatch be 45* if possible ! That’s a bummer that you didn’t think you were gonna have to do any more work to though I’ve been there many times lol probably why I don’t trust anything that comes into the shop anymore that was either built by somebody else or guaranteed by somebody else!!! Also most the time when you put ARP rod bolts in you will want to have the rods resized because the ARP bolts clamp load is much higher and that can distort the connecting rod housing bore, now sometimes there is enough clearance to wear it doesn’t make a difference but other times it can cause problems in which case sometimes it’s better to replace them with the factory rod bolts if you can’t afford to get any machine work done

@STREETMACHINETV Жыл бұрын

In a perfect world we'd do everything in a machine shop. I like to show people what they can get away with

@DaveHiggoHiggins Жыл бұрын

Watching this closely.. it's definitely time my LS400 gets boosted.

@davidbarnsley8486 Жыл бұрын

It is such a good job you are such a good engine builder Scotty 😂😂👍👍 I m watching this one for sure ❤

@STREETMACHINETV Жыл бұрын

Thanks mate

@julianalderson3938 Жыл бұрын

Thanx bro. Just yer. Love ya vids cheers

@chevelle5014 Жыл бұрын

Love Friday mornings

@mark7457 Жыл бұрын

Been waiting for this

@markjones7045 Жыл бұрын

I've been waiting for this for soooo long

@gregmyatt9932 Жыл бұрын

Good job Scotty! If it was me though, given the engines history, I would be atleast checking those mains.

@STREETMACHINETV Жыл бұрын

If the rod bearings were shagged I'd be more worried

@millsi1978 Жыл бұрын

"Keep it to 15psi" you're a funny bloke! 😉

@STREETMACHINETV Жыл бұрын

Or thereabouts :)

@maxrockatanksyOG Жыл бұрын

I can already see the Scotty head shakes and under the breath "Fucks Sake"

@nud3231 Жыл бұрын

I'm going miss the trolvo😢... But still the love the lexcen like a step kid😂😂😂

@gazza116 Жыл бұрын

hydraulic driven cooling fans have been around for yonks mainly on air cooled engines,deutz comes to mind they usually work on oil temp.

@STREETMACHINETV Жыл бұрын

That's cool. It just seems weird in a passenger car

@danielsulics711 Жыл бұрын

Send it boys send it!

@calebedwards4432 Жыл бұрын

This is the way

@MkdMuzza Жыл бұрын

9:28 - That's what she said.

@at9370 Жыл бұрын

Toyota related... Australian World of Outlaw sprintcar driver James McFadden has been working with Toyota engine development and running the 410ci engine they have had in development.

@stevethorne9605 Жыл бұрын

Scotty is definately tired of engine building atm lol. A 1uz lexcen will be a cool thing though

@STREETMACHINETV Жыл бұрын

I don't mind it, when things go right. But when does that ever happen?

@jasontrevis7142 Жыл бұрын

Are Arp bolts heavier? If so do you need to rebalance as it is a v8? Also more clamping force means distortion so rehoning required for the rods.

@jimclarke1108 Жыл бұрын

The only way to hoan, o what a feeling😁

@John-ok6sq Жыл бұрын

Those are "shade tree mechanic" rings that are designed for people who don't know or dont care enough to check ring gap.

@stephennelson6041 Жыл бұрын

looks like it sat with coolant in the bores, hope the heads were hardness tested? you should realy future proof it with rods and forged pistons, you know the boost will get boostier and boostier!

@STREETMACHINETV Жыл бұрын

Nah, some times you have to draw a line in the sand

@1969Risky Жыл бұрын

On this episode of Carnage: Scotty goes dual fisting action & plays with his ring! Lol just lucky that YT doesn't demonetize you!

@Brock_Landers Жыл бұрын

.0024 ring gap should be good for a boosted NA engine Scotty. When I would build my Honda engines (I4 and V6) I would always run .0025-.0027 ring gap and I never had any issues with blowby or ring butting, but I was running much more boost with all forged internals. It's your engine though and I'm sure you've built more engines than I have. I trust your judgement brother!

@STREETMACHINETV Жыл бұрын

We're not going to run massive boost with this one

@Brock_Landers Жыл бұрын

@@STREETMACHINETV I trust you brother. I know that you know what's best for your builds. I'm sure this will be a monster of a wagon!

@351tgv Жыл бұрын

I was up at a Toyota dealership today having a chat with a few of the tam members and mentioned that you wee building a V8 Lexcen wagon with a real TOYOTA engine and the boys in the workshop are now gonna watch this project build. Now put the 1.5JZ into the VN and re-birth that as a Lexcen sedan to compliment the V8 Lexcen wagon and take them both to Toyota HQ and show them what "THEY could of done if they had the balls back then to do it instead of the awful Avalon they brought here to replace the Lexcen from the USA.

@STREETMACHINETV Жыл бұрын

Thanks for spreading the good word

@GarageItYourself Жыл бұрын

It always sucks when parts end up being wrong/out of spec but on the plus side it's not your daily driver so, although annoying, you have the option to wait for something that'll do the job properly 😉

@STREETMACHINETV Жыл бұрын

Just puts us a week behind. And this was just the first thing. You'll see more in the next video

@GarageItYourself Жыл бұрын

@@STREETMACHINETV There's more stuff that didn't go smoothly? Seems to be the way these days. I actually had a part fit straight out the box the other day. I was quite glad as took 3hrs to remove the old part to be able to check it against the new 😅

@duncanh6095 Жыл бұрын

At this point i would 100 % replace the main bearings also. You are right there, just a few bolts.. 🤦‍♂

@STREETMACHINETV Жыл бұрын

More involved than a few bolts, we'll see how it goes

@hairymongrell Жыл бұрын

glad you didnt accept 25th its too much. i would aim for 18th top and 21 bottom. not a fan of the hone with crank still in but hey it should still work just might be more contaminants than normal. keep up the good work scotty

@STREETMACHINETV Жыл бұрын

Gave it a good clean

@kierenalvarez Жыл бұрын

Bro those are the big rods... I don't think your gunna have a problem. If boosting it mill the tops down on the pistons slightly for a drop in compression. (30 thou) Should be good for 900 crank hp "safe"

@STREETMACHINETV Жыл бұрын

Comp will be fine on E85

@LawnPotato Жыл бұрын

All well and good talking about doing it right, then why aren't you resizing the rods after putting different bolts in it?

@STREETMACHINETV Жыл бұрын

Pretty sure I've explained this previously

@DeathBaseTURBO Жыл бұрын

I have a funny feeling that the price of lexcens will 100% go up in price or already have

@wazzawalker6536 Жыл бұрын

Keep the Trolvo for a while longer just to put it up against the Lexan, Heads up style! That might improve "the views"

@ChristopherHallett Жыл бұрын

Lmao, sleeve it out and chuck a longer stroke crank in it!

@colinmiles9390 Жыл бұрын

Pity you can’t use the mag wheels off the Trolvo on the Lexion as they are probably different stud pattern as they would have looked cool on the wagon

@STREETMACHINETV Жыл бұрын

Very different stud pattern