Casio CZ-1 Phase Distortion Synthesizer - Part 2

Casio CZ-1 Phase Distortion Synthesizer - Part 2 - Sound Generation

Рет қаралды 3,228

4 жыл бұрын

In this part I look at the the DCOs (Oscillators) and the various waveforms that the CZ-1 can generate.
"What is phase distortion synthesis?" article:
www.musicradar.com/news/tech/...
-----------------------------------------------------
If you'd like to support the channel, you can check out my tracks below:
Bandcamp
runningonair.bandcamp.com/
Spotify
open.spotify.com/artist/5fNUf...
------------------------------------------------------

Пікірлер: 17

@marcgrauss3425 Жыл бұрын

Congratulations for this very nice video ! So well done ! 👍👍👍 Still, I was veeeery reluctant when I saw that you were using an oscilloscope (as you know, a spektrum is the only humanly understandable view of the timbre of a period of sound). But YOU WERE TOTALLY RIGHT !! In the case of the CZ, it was soooo interesting to see the difference between Casio's Drawings and the actual waveforms !!! And you even switched to the spektrum !!! 😃 I did not try an oscilloscope in the 80's, the waveforms were sounding more familiar than FM and I was FAR from imagining there could be a difference !!! You definitely did an excellent series on these CZ, BRAVO !!! 👏👏👏

@RunningonairMusic Жыл бұрын

Thanks

@suitandtieguy 2 жыл бұрын

thank you for this fantastic show and tell!

@RunningonairMusic 2 жыл бұрын

Glad it helped!

@suitandtieguy 2 жыл бұрын

@@RunningonairMusic totally! I just read a paper about how PD worked and your excellent scope shots helped me translate what i read and what i saw on the front panel into how it actually worked. I build analogue modular synthesisers now but you never know what's in the future!

@Wacholder 4 жыл бұрын

I have several different CZs, and a hardware osciloscope hooked up: i was always impressed just how accurate the waveforms are, including the square wave. Are you sure you didn´t forget about the DCW sustain? Sounds & looks like you have a slight envelope there, but not quite up to value #99 on sustain, thus resulting in an square/sine-wave modulation..?

@RunningonairMusic 4 жыл бұрын

I'll check. Thanks for letting me know.

@dlichtenberg 3 жыл бұрын

Hello. What is the name of the software you are using to analyze the synths frequencies?

@RunningonairMusic 3 жыл бұрын

Hi, I use Soundcard Oscilloscope www.zeitnitz.eu/scope_en Thanks

@axelcosa 4 жыл бұрын

Hey, I just bought myself a cz 1 model but i kind of not get all the posiblities, I watched all your tutorials, is there a way I can contact you to solve me some doubts?

@RunningonairMusic 4 жыл бұрын

feel free to ask questions here. I can't guarantee I'll have the answers though. You can also contact me via twitter. Details at the end of the videos. Thanks.

@axelcosa 4 жыл бұрын

@@RunningonairMusic It is probably a dumb question but as far as I understand you analysed on the osciloscope the original waveforms. Can I simply just get the original waves without the presets? Or how did you came up with those sounds.

@axelcosa 4 жыл бұрын

Literally this synth is my first introduction to digital synthesis

@RunningonairMusic 4 жыл бұрын

Try the initialize button. That will reset each section to a basic state. It needs to be applied to each parameter section individually. Check the manual for more details.

@cesvlc5211 2 ай бұрын

One thing I don’t understand: why do the waveforms change over time? I would understand that they change if you have enabled some short of envelope affecting the algorithm, but the goal of the video was supposedly to see the basic pure waveforms, so seeing they evolve over time makes it difficult to understand…

@cesvlc5211 2 ай бұрын

Ah, ok, I found your follow up video, in which everything is cleared: m.kzfaq.info/get/bejne/kKxhdKl-yr3ZlWQ.html Thank you, I understand now.

@RunningonairMusic 2 ай бұрын

Glad it made sense in the end.