Dylan Wilde it’s because this isn’t a fucking rebuild. He just repaired a few minor things that anyone can easily do. But other youtubers have to take apart most of the car and replace and rebuild everything. The only thing this guy “rebuild” was the speed gauge housing

@@jomcpetv1013 fuck off with ur negativity

dude you are so correct with what youve said. just ignore that one fool . ive visited his page i haven't seen any motorbike rebuilds or any videos on his page he is just a big mouth armchair general

JoMcpeTv you wasn’t even being negative tho just stating facts 🤣🤣🤦‍♂️

its hard work either way and its the vloggers that are annoying, "we are doing this non-related thing first" video.

Calin Opi thanks for the tip I’ll keep that in mind next time.

Not

same bro

Dennis Holm LoL sorry

i was already listening to good music.. the video was muted by default :P .. got to know that the music was bad from your comment only xd

Enjoyed the music a lot.

Same but its better than without music.

Dwayne Thomas thanks bro!

I don’t see negative comments here. I see a lot of concerned people viewing his repair work. Whether he’s keeping the bike or selling it, the first and foremost biggest question should always be “Is it safe to ride?” Especially after a crash. Check the alignment, check the suspension to see if the forks are suitable for riding or if that too needs to be repaired, check the engine, plugs, drive, etc...he’s young, he’s determined which is great but he should definitely be looking into all the small pieces and not just the cosmetics.

@@captaina4458 hater

keveshan naidoo more like an experienced rider and mechanic to know the difference between a quick fix vs a legit rebuild. Trust kiddo I’ve been through the loops to know what’s the better choices to make on crashing bikes, rebuilding bikes and selling safe bikes. So before you go off popping your mouth calling someone a “hater” you should take into consideration what the message is. 😎

@@captaina4458 he probably checked the forks already I mean who wont check that that's the first thing to check on a crashed motorcycle

BlueMatterZ ツ same

Orange repsol for me

DEFINITELY!!!

I'd prefer Redbull look for some reasons, but i love this bright and refreshing look too. So, either way i can't judge the look just because the bike looks super awesome!

the tarmac loved it too..

AMO RELOADED sure man! Sorry to hear about that tho.

Spree Pirat thanks man!

Carlos Google Maps lol thanks, I like my variety! My custom r6 was a fun build too

thanks

Nice

But what remix is that ?

Razz x Zack remix

thanks dude

John Church yeah there was only 2 bolts that had rust and that was the frame slider bolts, and the pegs were perfectly fine, you’re right tho I probably should have inspected the tire better but it looked really good from the outside.

Hey bro, hope you get better soon.

it's not your bike.

@@elismigel707 It's definitely not his bike, or the same model as his. He doesn't even own this bike lol what a prick.

To make it worse, all of his videos are stolen

@@LiquidSnakeSSJ4 Yeah Yeah Yeah Keep bothering me, Knowing that I did not talk to you, you idiot

thx m8! (}{:D}

LonleyGuns no it wasn’t totaled but it still needed a lot of stuff

If you watch his videos, you know its most cosmetic stuff replaces, because its often only cosmetics that gets destroyed when crashing

​@@mathiasnkristensen I agree with You about destroyed covers, are the most damaged parts visually after crasch. But after every crash it is essential to measure main construction points, especially when vehicle is from aftermarket. Process of rebuild is descripted as measuring -> diagnosis -> range of repairs -> repair or regeneration -> repalce -> measuring after process (it is short version). So repalcing few covers is a part of rebuild, not full. I want You to know, that I don't say, that it was bad work in the video. It was good to see effet after such damaged parts, and vehicle looks amazing in the end.

Mathias NK I’m actually moving soon and I’ll have my own shop so I’ll beable to do more serious builds.

@@dal113tek wdym idiot(s)? I support him. I didn't say anything disrespectful or anything bad.

Pinnallah....... ❤️

Paul Lucas The rear axle to my knowledge it shouldn’t effect it no matter which way it goes in, i did realize that I did swap sides I’ll make sure I put it in the way it’s designated by the manufacturer next time, And I used some paint at the auto parts store believe it was duplicolor. Thanks!

I was about to say the same thing about the axle.

Yeah it’s sucks 😂 I’ve done that many time

that made me cringe a little...

Well done

I use the same paint as him it's an anodized kind of paint but it works better with bare metal, there is a can that's an adhesive for that kinda paint kinda like a primer but just grabs that paint better, completely clear

@@teamia3901 Bruh that project source spray paint from Lowes that costs 99 cents a can....not even heat rated paint. That shit is going to peel and look terrible almost instantly

@@andrewschafer2544 The cans run about 6ish dollars at Rileys that are heat rated but he is putting it on without any prep work or without paint adhesive that shit is Gunna scrape hella bad rip

ViSKy Vlogs thanks!

what do u mean?

why

They can be totalled and you wouldnt know

@@davidstancu2963 You can check the bends of the upper fairing stay and frame before you buy the bike

Why do people hype up those little pieces of shit

3218624101gustavoadolfomotoadeseaadolfo hoy

Whyy

@@jeandregroenewald3190 They can be Damaged after Crash. Do not save money on tires

❤

Gotta check for a buckle in the rim. And remove tyre to clean the bead, after all the gravel that got in there.

I have to agree, I have one. 😊

ma men : thanks

@@JizzyTv you wlcome :D

Is that a SUPRAAA broo?😂

slammed 🙌🏻🙌🏻🙌🏻

I‘m playing Forza Horizon 3 at my break I read this 😄

Some 1K products are designated by manufacturers to use directly on metal. It is dedicated for non representative parts, but it isn't professional. For full coat isolation by epoxy primer is required.

id think it would heat the engine up more or faster? that would be my guess, cuz i heard that it happens..

@GET IT that is why i put a question mark, and that is why i said " that would be my guess" because i was unsure..

He did.

Yup

Is that gonna affect anything?

👍👍👍👍👍

I know absolutely crazy! And more videos on the way!

Jason Bielecki it’s just the case cover lol, oohhhh no it’s the end of the world as we know it!!

Why should anyone use some kind of torque specs for an engine case?

Miguel Covas technically everything has a torque spec but the cases to me don’t really matter, I’ll torque to spec for what I think is important.

@@miguelcovas3295 because if unequal torque is applied u can leak oil or over tighten the bolts which then turns into a stripped bolt or threads. just some insight. I have over 20 yrs experience with motorcycle mechanics. u will learn the hard way😉 good luck🤞

Jason Bielecki I’ve been on motorcycles since I’m 7 never stop riding and almost never let anyone touch my bike I’ve done every repair that you can do on a motorcycle and never had to torque a engine cover, so maybe I’m lucky, I’ve rebuild the engine of an 2012 R6 2 years ago after a bad crash and the bike is perfect no striped bolts no cracked cases no oil leaks, I’ve just changed my cam shaft bearings in my Ducati 1100 again no leaks and no issues whatsoever. So I consider myself very lucky. With the Ducati I even learn that the clutch press does not need to be torqued and yes I’ve consulted a Ducati engineer because I did not find any specifications on the repair manual. So while you can make some sense you being a mechanic for over 20 years you know that it is not really needed. Any way respect to you and keep up the good work!!!

Gregory Springfield sounds like a bad wreck!

@@Benjamminoutdoors yean man he was travel down the rode when a lady just pulled out on him he dump the bike and broke his collar bone, three ribs and a fractuce pelvis. Bike was total out due to fairing damage. But she been complete rebuilt.

Also us to have the 07 fireblade blue and yellow love the ride of the Fireblades. Enjoy man. That repsol white is hot.

Lol yeah I’ve started doing that since, I didn’t realize I could till I saw someone do it a few months ago.

I am far from that lol but thanks for the compliment. Each build I do I get better and better so stay tuned!

@@Benjamminoutdoors Thnx Ben, I'll stay tuned. If you're ever up for a colab, hit me up or come on down to Africa! I'm from Burundi, currently working out her as an IT Assitant, I got a GSXR 1k and a YSF R1 - before you kill me, I got them because they are just well made aaaand I rebuilt it myself! You are welcome anytime to try them out - Yes they are modified. heavily! jst hit me up, come by and gain some subs with an african tour! Plenty of bikes out here, but we dnt vlog as much

Bertrand Bizimana awesome! Sounds pretty cool!

hedayatomid Yes I put heat shield on the inside of fairings I just didn’t show it, and Honda doesn’t recommend putting Loctite on bolts like the case covers so I don’t, I only put it on stuff that really needs it

MM93 thanks!