You schould work for Stihl and you schould get a lot of money. Your videos are just fantastic. Thx. Stefan (Berlin Germany)

well, this explains why my chain just came off when I turned it on! New to chainsaws and learning everything from scratch here on youtube and many many trial and errors in the woods!! never knew chainsaws where so temperamental! thanks for the much needed informative videos!!

I have been adjusting my chain for more than 20 years now often times I explain to people proper chain adjustment is very important and here you are giving an exceptional demonstration thank you so much. Joe from California

Great explanation for new users. I also follow that procedure for tensioning on my MS660 and slightly back off the tension until the chain and bar heat up, then re- tension again.

I really appreciate you adding all the takeouts that was so much fun at the end thank you so much for being amazing KZfaqr.

Most of this is available on other videos, but a bit here, a bit there, all over the place. This video combines most of what you need to know in one concise video, and that's why it's such a good video. Thanks for posting.

This is the first video I’ve seen on KZfaq about proper chain tension. Thank you for posting

Seriously this video made me learn stuff, smile and laugh. I sure wish I could get that bar for my 261 here in US..Awesome bloopers at the end.

Learn something everyday. Never knew to lift bar when tensioning chain. Awesome 👌🏻. Love your vids. Great stuff. 👍

Just did that today and it worked perfectly. Still shocked how perfect the chain spins. Thanks.

Great video. Nice to see you back on KZfaq. Don't worry we all have problems with words now and then. Take care and have a blessed day and I'll see you on your next video.

Great advice as always, from a professional! Plus you are a ton of laughs, and I love the way you say....."bar"!!!🥰

Always love your chain saw tips.

Super erklärt! ! Wenn man sich dran hält dann ist eine maximale Lebensdauer der Garnitur vorhanden! Was auch viele nicht beachten ist nach Gebrauch die Kette zu entspannen, ist im Winter bei Kälte sehr wichtig damit nicht die kurbelwellenlager zu arg belastet werden! Wieder einmal ein super Video, weiter so! !💪💪👌👏👏

Some great advice, I hope all is well with you! Love from Canada.

Good advise ! 👍 Good to hear from you again .

Perfect video! I tightened it again and again during the day and ended up forgetting to loosen the chain. Result, the chain tensioner was broken. So don't forget to loosen in the evening. Especialy in winter!

Good evening Miss 👌👍 Great safety points and great tips too 👍👌 Keep up your OUTSTANDING VIDEOS MISS and Happy St Valentin with your loves one on Monday Miss 🌹👌👍 Cheers 🍻

Really great explanation thank you Felixia. Don't forget to loosen the chain slightly when you finish for the day, because it will cool & shrink !

Always love the bloopers have a great weekend

Noticed I was sagging a bit off the bar, but after watching your informative video, I've tightened up, lubed up and ready for lots of wood! Excellent video 😉😁

Great video. Glad you are back making them again

You are good and know your chainsaws and correct chain tension is important, very well said !!

On some saws the chain gets tighter when you tighten the bar nuts. I also like to rotate the chain by hand to see if there is a tight spot. I try to get the chain adjusted so it is not too tight in the tightest spot and not too loose. You are also supposed to break in a new chain running it for 3 minutes with no load. It gets a little messy, but gets the chain warm and oiled.

The dog barking when you messed up, priceless 👍

Hey FL new sub here! Great topic. It’s one of the most import things in my opinion! You nailed it. 👍🏻👍🏻

Gut erklärt, vielen Dank für das Video! Die Outtakes waren sehr lustig... Mach einfach weiter so, du bist toll!

Another great video as always. Keep the chainsaw chain tension tight. Thanks for sharing.

What a great channel! Learning new skills from a badass young lady. Life is good.

And don't forget to release tension before cooling off if you readjusted the tension of the warm chain.

Good video and good advice. Always nice to watch your videos👍🙂

Good to see your videos again,

good video! ill be sharing this with others that i cant explain it and show it to them in person.

I really paid attention to the tension part , wow she's like really cool and awesome good video by the way 🙂

I do miss you coming on here. A small highlight for my day! 👍

I love your videos Thank you and keep them up , I now have my wife watching your videos and she's amazed. 👍🙂

Thanks Felixia, you make chainsaws so interesting!! that was a tongue twister to say alright!!

Thank You! I’ve been running too tight.. love the out takes! ;)

Love the outtakes!

Great tip and thanks for sharing.... plus when to lose it can ruin your sprocket that drives your chain...

I noticed people had complained that there battery on the 161T did not last long, yet to find that proper tension on the chain that the battery lasts, but also the cutting action of the electric chainsaw is about speed and letting a sharp chain do the work rather then push it forward, if you do push down too hard the chain stops as there is probably a electronic sensor stoping it in order to protect the motor, batteries, chain and bar, as we are not using as much toque like a gas powered chainsaw yet more speed, but this seems to result in a longer lasting sharp chain, and more accuracy to smooth pruning cuts. where as trying to push a chainsaw blade on a gas saw because it also has a bit more torque just wears the chain faster, and thus less work gets done with less sharpening, but it takes about a month of continual use of a electric chainsaw to adapt to its potential.

Great info from a professional. Thanks

Great video love the bloopers ❤️

G'day FLJ, very informative video for people starting out with chainsaws safety first derailments are never fun. PS my MS 400 C finally arrived and you were right it's a little ripper ! I'm using my 291 as a door stop now 😜👍🇦🇺.

Keep up the good work and great content!

Greetings from Poland. You're a great woman.👍

Great video as always, still smiling about the tounge twister 😂

Thanks ! Need to start lifting the bar before tightening.

Great video and advice!

Could you do a video on how you sharpen your chain in the field? Great videos thank you

Hey we haven't heard from you in a while...keep the videos coming 🙏

I like your video on how to tighten the chainsaw and all that stuff very important to keep up your good channel and I followed you shifting regards Andrew

I like your axe pendant! I wear one kind of like that,mine was cast with the ashes of my dear friend and former boss. He was a fan of yours too

Another great video from the tree lady !😊

Great video

Great video 💯

I already knew all this but when Felicia is talking, I'm listening

Priceless

Stupenda

Thank you for this

What type of chain do you prefered rs chain or rm ( full or semi chisel) thank for rep y like your video

Thinking what midrange saw to get stihl 291 or echo cant decide 🤔

Another awesome video. Stihl should hire you to do a calendar! I can tell you love your saws. There yer little babies...

😍,j apprend et je vous admire en même temps ❤️

Great video felixia ya looking well being on holiday

I'm pretty sure stihl chains are pre stretched but ya it's important to check tension throughout the day I tighten mine slightly more than you did to allow for the heating up during work. I think everybody will prob have their own tightness preferences but great job 👏

Sei fantastica Felixia...😘

Nice job

So if I cut with the top of the bar do I need to tension the chain by pushing down instead of lifting up? If the chain expands as it heats up do I need to relax the tension once the bar and chain cool off at the end of the day? ?

Thank you

You are certainly awesome

Great video Felixia, and once again, with good tips. I have but one gripe, just when videoing with a cell phone (which I assume is what you used) run it sideways on Landscape. I know I'm different but, my eyes are side by side, not one on top of the other, so I find it difficult watching through the 'crack in the door' syndrome. Otherwise great, thanks for posting!

This is a good looking hard working intelligent lady !

How do you keep your chaps so clean?

Nice!

Stihl great videos.🖤🧡🖤🧡🖤🧡

Great tip there Young lady 💐

What type of fuel can do you use? I see that combi can husqvarna has is nice. PRICEY though.

Super useful video Felixia, thank you. Looks like I’m tightening my chain too much!!

Har du prøvet Stihl's rapid hexa kæde? Og hvis, ja. Er de noget værd eller bare opreklameret?

Do you pull up the tip while fastening the bar-fixing-screws or whatever they are called?

Cool stuff...and you started out in photography quite a Gal and a cutie.

I just did a full clean and oil on my saw ❤

Hey girl great content

1) West Coast Saws for felling dogs to fit a 261. 2) Do you prefer Danish pork ribs or pork roast ?

Thanks helpful

👍awesome thanks

Buna! De ce nu mai postezi?

So cute and smart

Love you😍

Felixia as stihl got a new chainsaw out ?

Record in landscape mode? So we can see what you are doing better

💐

great job thank you...Shoe

I think all chainsaw manufacturers should have your KZfaq link printed on their instruction manuals 🤣

Love this chick.

Stunning lady

🔝

Good video... mi piaci 😉: hai buon gusto nello scegliere buone attrezzature... 👍

Good job 👍 lol.Too funny