The products in your description for High and Low Beam is the wrong link, it is for the replacement Xenon bulb not LED?

@@dgbstuff OK I’ll have to check that. this is the first time I’m hearing that, but you can also type in LED bulbs from that link and you can find what you’re looking for. Sorry for the confusion I’ll try and get it straightened out .

Thank you for your comment.

Thank you for your comment I hope you continue to watch my videos and if you can leave me a thumbs up.

Thank you for your question. The top light is your parking light. The middle one is your running light and the bottom one is your headlight, high and low beam so I don’t know which one you are referring to all the bulbs are in the description you can purchase them there. If you enjoyed the video, please leave me a thumbs up.

Thank you for your comment and if you can leave me a thumbs up.

Thank you for your comment

Thank you for your comment, and if you can leave me a thumbs up.

@@buildingwithpapa ok

Thank you for your comment and give me a thumbs up if you can

Thank you for your comment, and if you can leave me a thumbs up.

Thank you for your comment.

No problem I enjoy making these videos I put many more up. Also if you can please give me a thumbs up it really helps the channel.

Thank you for your comment,if you can leave me a thumbs up.

Thank you for your comment and if you can leave me a thumbs up.

Thank you for your comment

Yes, this is true on the driver side but not so much on the passenger side. I hope you enjoy this video, and if you can leave me a thumbs up.

@@buildingwithpapa updating on the "little" project on the escalade. I just bought the truck 2wks ago, first time working on an escalade. the 2 headlight bulbs were out. I managed to get passenger side (air filter change too), reasonable task. BUT As you said the driver side was a bastard! Dear Lord! I even undid the windshieldwash tank, what a mess. it took me over 3hrs, just when I was done, I sliced my rt hand on a chipped glass, ended my day with stitches. I should have taken your advice and removed the bumper. Lesson learned.I appreciate the quality of the Cadillac, but the engine design is not conducive for self-repair.

Yes, I’d like the quality of the Cadillac also. How is your third brake light I have a video showing how to repair that also and don’t forget to leave a thumbs up.

Thank you for your comment I really appreciate it and if you can leave me a thumbs up.

I am trying to replace the middle buld right not. T8hey are not working. Help

​@Cametrick Nesmith did you get them working? Did mine tonight and middles are not working

Thank you for your comment. Give me a thumbs up it helps and I have many more videos.

Thank you for your comment, Hope you continue to watch the videos and give me a thumbs up 👍

Thank you for your comment and if you can leave me a thumbs up.

Yes, mine is a 2013 also and I love this truck. The slide out bed It is a cargo glide,Is great also able to haul my tools and get all of them without having to climb in the truck, Here is the link so you can check it out : www.amazon.com/gp/product/B00NJ397FE/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00NJ397FE&linkCode=as2&tag=papabuilding-20&linkId=c57cc2e3c235dd3552e25022672a9eeb I have many more videos of working on this truck check them out. Thank you for your comment and leave me a thumbs up if you can.

@@buildingwithpapa Thank you! It appears that it is no longer available. I have checked and saved your other videos on the EXT and saved then all. I think that I have liked all your videos, but I will double check to make sure that I did not forget one. Regards!

@@claudeperrault4164 Thank you very much!!

@@buildingwithpapa what size tray is it the 75 inch?

I’m not sure if it’s 75 inch when I bought this it was specifically made for this vehicle, but I understand it is not available anymore. if you comment back and leave me a thumbs up, I’ll be glad to measure it for you at this moment I don’t remember.

How to go to LED?

Thank you for your question. No, it did not mess up mine everything is working fine. I hope you enjoyed the video, and if you can leave me a thumbs up.

No I did not need any LED conversion. Thank you for your comment and leave me a thumbs up if you can.

@@buildingwithpapa thanks I already did appreciate you

@@buildingwithpapa you only need an adapter for blinkers not solid lights

you only need an adapter for blinkers not solid lights

Not sure what's wrong. Replaced the top with no problem. Middle replaced but not working (in drive) I got nothing. Help please

So the ones that went out are they the ones the shop did for you? If so I would contact them first because I don’t know the bulbs that were used and it’s odd that they worked at first but not working now. I wish I could be more help but it’s difficult not knowing what products were used.

@@buildingwithpapa Thanks for the reply. My question was "can they be installed backwards (Polarized) and the answer was YES, Sylvania lists behind the bulbs, where you rip it to take bulbs out that "if they don't work when installed to just turn them around. I didn't see it and shop somehow didnt know, so I had them turn them around and all good now :) Thanks Now just worried if my Bright BLUE running lights that say "for off road use only (like pretty much all non-standard bulbs do) will be an issue locally or not, just because they are VERY BLUE :O

Thank you for your question. What I would like to know is what do you know the middle light only comes on in the daytime when you’re driving it doesn’t come on with the other lights on.. so if you were want to check it out, if you pull into a shopping center facing the glass, you can see whether your middle lights are on or not the middle light will not come on with your main lights on. If you still don’t see them working, then it may be something to do with your switch inside the truck, but check this out first I hope this helps you and if you can leave me a thumbs up..

@Santo Mineo Thank you for your response. Yes, I tried every scenario. I'm guessing it's the fuses. Just can't get them working.

I believe they are I don’t know what state you are in but I see a lot of them in our area. I hope you enjoyed the video and you continue to watch, give me a thumbs up if you can.

Thank you

Thank you for your comment and if you like the video, please leave me a thumbs up.

Yes it does. I hope you enjoyed the video and if you can leave me a thumbs up.

Look in the description I have a link to all the lights.

Thank you for your comment. Yes, you do pull it out of the front of the truck, but you have to get to the bolts so the driver side I show you how to remove the headlight out of the front but as you can see once you watch the video it gets caught on the bumper so the bumper has to be slid out a little bit also, I hope this helps you and if you can leave me a thumbs up.

The fog lights are the ones at the very bottom I haven’t done those yet, I have been thinking about it so I’m going to investigate it and I will do those soon. also thank you for your question.

I went with auxito brand got mine off Amazon year ago and they are still going strong. There brighter than the dam headlights 6500k white. The wife can now see better at night. The lume output is unreal. Worth the money esp if you do lot of night driving.

Thank you for your comment, I will look into that type of bulb

I’m sorry to hear that. I know Chihuahuas have a bad reputation of being nippy, but they are very amazing when they’re raised in a pack one is the leader and they keep everybody else in line. We lost all our Chihuahuas in 2020. I hope you enjoyed the video, and if you can leave me a thumbs up.