Thanks for putting the video up! I dont have the exact same peugeot as yours but they essentially all look the same under the hood. I was able to change the coolant in my car on my own thanks to the easy to follow instructions.

hey hi scotti, thank you for the videos as i just recently purchased my RCZ and love to work on my cars, my last [project car was this australian made commadore i replaced all the interior, painted, added panels etc, i wish i could go to the netherlands meet as my cousins live in Rotterdam maybe one day but these videos are great to fast track my learning about the RCZ perfect.....

That is exactly what you should do to modern engines Honest Genuine Advise. Thanks a lot very very useful

Gracias por los video! Sigue así crack!

Great video!

thanks man!

Thanks for your video

Beau boulot comme d'hab, même quand tu dois bosser sous la pluie ;-)

Cool!!!! You are finally coming😬😬👌 good good.. haha

Tq man...

Well the right way to this is to bleed the cooling system while car is cold from the 2 bleeding points...the first one is on the hoses going to heater core..and the second one is the bleeding screw in the thermostat housing...While keeping the expansion tank always full during this process.

Hi thanks for your videos they help a lot. I recently got an RCZ and I wondered if the engine Fan stays on for a while after I stop, is this common for this car? Or do you think it’s a fault? Thanks

Tnx, im just wondering as a 208 owner... doos your RCZ also have a VTI engine? From what i heard the RCZ is basicly a 308 engine 1600 cc, and with my 208 its a 1200 VTI... the question here is: can i use the same coolant as youre using?

Hello, thanks for the video. I have a question. Can you use the same for Peugeot 508 2015 2.0 Diesel?

Can green antifreeze be poured instead of this pink antifreeze?

Nicework. You just have to make sure your percentages are correct because when you put the distilled water in initially you now have mostly distilled water in the heater core. That means you need to be adding more than 50/50 mix to get the entire system at 50/50. You need to know what the total capacity is and then you can figure it out exactly. I usually add 100% pure coolant after running distilled water three or four times through the system

Hi, is it necessary to drain eventual air bubbles? I watched that you do not drain in anyone drain valve..

hi thanks for the help, ive got a sign saying faulty engine how do i fix it ive got the same car as you

Thanks, how much fluid did you put in?

Hi from Malaysia. Is it necessary to use garden hose and flush/bleed the whole system to ensure all the contaminants are cleared?

I put in little bit windscreen washer in the coolant by mistake, coolant was 85% from max and i filled rest 15% with windscreen washer. Basically i was suppose to put it in its right place but made a mistake. You think I can drive my car with little bit of windscreen washer in my coolant? Thanks

are you working at BASF?

I need help if you please I flush coolant and i followed your steps I opened 1st and 2nd vents and after drop water i close them I did all and i start engine and when temp reach 90 while cap open alot of water goes out ... and temp down then i fill more and second time did it again ... fan working normal and radiator and upper hose still cold until last time i fill water and close cap temp reach 90 fan work and thermostat open and mix water from engine and radiator.... its work normally but why when cap was open water goes out and radiator cold ... Hope you could help me

Hi, peugeot 3008 year of 2018 model. Possible to show how to change the coolant? Thank you...

Hello would this be the same principle for the Peugeot 208?

Thanks peugeot = bleue

Can I change the coolant by sucking from the coolant vase ? Anyway nice video :)

My coolant keeps on running out. Every time I drive extremely hard. How can I try to minimise this? Thanks

Coolant colors do not matter anymore since many years. Colors no longer correspond to the chemical composition and there is no consistent standard followed by all manufacturers.