Supermoto Makeover- Will It Run?

Рет қаралды 36,105

Күн бұрын

My Husqvarna FS450 gets the new slicks, new graphics kit and new piston it desperately needs.
📷 SOCIAL
Instagram- / chaos_causes_
TikTok- / chaoscauses
⚙ MY KIT
Insta360 One X3- bit.ly/Insta360-X3-Chaos
Jeans- bit.ly/JeansPandoMoto
Gloves- bit.ly/GlovesOnyx
🎵 MUSIC
Epidemic Sounds- www.epidemicsound.com/referra...
📧 BUSINESS INQUIRIES- justin@chaoscauses.com
📖 CHAPTERS
0:00 Todays Plan
0:23 New Tires
1:16 Jim_Khana
3:51 New Tyres
5:25 New Graphics Kit
7:31 Top-End Rebuild

Пікірлер: 70

@brendonsmith5836 Жыл бұрын

Appreciate the Ken tribute! Even as bike guys we can appreciate cars aswell :) great video.

@krispewkrem3 Жыл бұрын

Ken Block was no storms get to dirt bikes, snow bikes, snowmobiles.

@simonparent7644 Жыл бұрын

Mate i admire your courage taking the engine apart. I'v always been too scared, nervous, aprehensive to do anything but change a stock pipe for a performance 4 in 1 and even that when sideways when i broke the head off of 1 of the bolts holding the pipe in place! Cheers to you Justin!

@michaelvick2872 Жыл бұрын

If you’re willing to do so, you can basically practice on an old shitbox bike and buy each individual component and put it together yourself.

@colin.pfluegl Жыл бұрын

For the Exhaust removal: You can unscrew the top screw of the damper and lift the swingarm up, then it's enough room to get the exhaust out^^

@mitchellsavage1542 Жыл бұрын

Absolutely loved the Ken tribute🙏🏼🙏🏼🙏🏼

@BipedBD Жыл бұрын

I felt that hesitation before powering up something you're "pretty sure" you put together correctly but you aren't ABSOLUTELY SURE it won't turn into an expensive disaster as soon as you fire it up. I felt it down in my soul.

@VishalJN Жыл бұрын

I tell you man.. you are the most underrated content creator!! I will forward your videos to all my friends and family. Love the effort you put in!! Cheers to many videos!!

@siddharthkaranchery791 Жыл бұрын

The tribute was so Ken!

@bearon7664 Жыл бұрын

Pro tip: Spin the engine via the crankshaft when the camshaft is back on. Then you get a feel for whether you messed up the timing.

@johnnyblue4799 Жыл бұрын

I'm pretty sure he did, but for "artistic effects" he didn't show it on the video... :D

@user-df1ss4qg7u 11 ай бұрын

Thanks for your diligence in doing the just simple for me things in bike maintenance to be so interesting to watch. Continue with technical stuff more!

@colin.pfluegl Жыл бұрын

I did this on my 2019 FS 2 Months ago, inserting the Piston Ring nearly got me crying...

@hendrikvanzyl2689 Жыл бұрын

Great video, and great big balls for the rebuild!

@michaelfila2796 Жыл бұрын

Nice work! I have done a few top ends on those motors now. Worse than getting the clip out is getting that clip back in with the cylinder on top of your hands and even less room. Never tried with the exhaust still on, I have always just removed the shock to get it out.

@prenninger_jonas Жыл бұрын

Love the Supermoto 🫶

@brutaloutlander5933 Жыл бұрын

This is my first time stumbling across your videos,and in the first minute or two your accent sounded veryyyy South African 😂 And then I saw the flag on the sticker kit!

@thorstenmetalhead9666 Жыл бұрын

Thanks for this awesome video. You basicly did 3 videos in one.

@Twiztify Жыл бұрын

Definitely need the follow up. Thank you!

@Arn_Pa Жыл бұрын

your edits are always so funny ❤

@NINJANAKIN Жыл бұрын

I can never skip one of your videos they are so amazing and you need more subscribers hope I can go back to South Africa 🇿🇦 again soon keep up the amazing work.

@ShiftQuick Жыл бұрын

Very informative content. Well done!

@joek81981 Жыл бұрын

I had no idea these sorts of bikes needed anywhere near that amount of service. I would've never guessed this was any different than a regular old street bike.

@theflaviomx Жыл бұрын

Great vid! Love the Husky, and I really liked the tribute! KB43ver

@ustoysoldier Жыл бұрын

Nice video always, love the tribute to Ken.

@okie-rider Жыл бұрын

Great job!

@marcus7840 Жыл бұрын

Great work and videos....

@Christopher_Hall Жыл бұрын

Well done 👏

@4listor.official Жыл бұрын

Nice Work Justin

@alsanova Жыл бұрын

Lol you are such a hooligan with that bike! 😂 3:25 - Look like you had fun doing burnout on (most likely) asbestos tiles I guess?! 😀

@Szlejer Жыл бұрын

Would love to add one such beast to my Husky 701...

@luciandickens2418 Жыл бұрын

This is by far my favorite vid of urs. I hope in the future you can make more content like this. It's so entertaining, yet so detailed. Great work champ. I really appreciate this alot #JoziSouth

@anchit44 Жыл бұрын

Was waiting from so long😭♥️

@basvanlangerak8423 Жыл бұрын

The graphic kit looks amazing!

@LSD97123 Жыл бұрын

I knew someone else was involved when I saw that 360 camera peaking out of a corner at 2:24

@BlueDevilMoto Жыл бұрын

I remember how scared I was to start it after servicing my valves, I can’t imagine trying to start after a rebuild like that 😅 the Daytona is much less serviceable that that though. Loved the video as always!

@engineercommander-2034 Жыл бұрын

You just inspired me to DIY rebuild my VL1500 intruder engine. Great vid 👍🏽

@MacielFC Жыл бұрын

Ken Block 🥶🙏

@GlampCity Жыл бұрын

Your best vid yet

@bakymeansbucks7636 Жыл бұрын

Hey bro. Great job 👍

@guillaumetsogbe-hamel2145 Жыл бұрын

Only gripe I have with your rebuild is that there is too much guess work. Never assume the engine wear is enough to put an up sized piston. The hardest part about engine building is calculating clearences. Rings need to be checkequed for gap, piston to wall clearence also, and a cylinder hone would also be good. Getting clearences right is the key to longevity.

@andybishop82 Жыл бұрын

my ktm500exc cover 330hours at 10k miles with stock engine, still running strong :)

@abegaz9582 Жыл бұрын

you got balls bro💪!!

@ericverwey2642 Жыл бұрын

Hi sorry to ask.. but where can i get supermoto wheels for a hasquavana 610 te 1999 model .. or the outer rim of n super moto wheel...or are there ktm rims i can use

@dylanjamesweggz3573 Жыл бұрын

You gained my respect when you said you had 250 two smoke 😂

@Jagknorr Жыл бұрын

Wow, thats a lot of work! And you gotta do this after how many hours of usage?! Ill stick to street bikes, thanks 😂

@LerflipTV Жыл бұрын

it turned out really good, but in my opinion the seat would match better with a black cover instead of the dark blue

@ZH2. Жыл бұрын

Nice graphics kit with the original graphics way better than the old kit

@MrMakara Жыл бұрын

I love your Moto

@lukalukastic8234 Жыл бұрын

Did you make the custom graphics on your own or did someone make it for you ?

@sos8747 Жыл бұрын

Should have gone for metzelers!

@zain670 Жыл бұрын

Get an H2 carbon next

@duncandehulst2016 Жыл бұрын

No im not bored 😂

@ChaosCauses Жыл бұрын

My hero!

@007Th0mas Жыл бұрын

You need TDC when you put it together. When you take it apart, you dont.

@Rebaldoz Жыл бұрын

Dunlop??? But... Michelin!?

@doria500 Жыл бұрын

9:00 you're actually far from right here, if you ride on the street/track with good tires you'll rarely hit the rev limiter in a 450, on dirt though you will hit it constantly, you have more engine time on supermoto than motocross

@marcmulhern1736 Жыл бұрын

Did you end up with any 'extra' parts?! You know a rebuild isn't complete unless you have extra parts the manufacturer included for no reason! ha ha

@RevBomb600 Жыл бұрын

Just because the bike started doesnt mean it works. Its when you twist the throttle, then you start figuring out what just broke

@TheJoren1 Жыл бұрын

U are not supposed to put a piston number 2 in a cilinder number 1 man.. there 2 types of cilinders, even a cilinder 1 at the minimum spec cant take a piston number 2.

@mikcute9510 Жыл бұрын

Bored? WHY WOULD I GET BORED. ITS SUMO CONTENT

@doria500 Жыл бұрын

honestly you should've kept the original look of the bike (not the kit it came with, but the original Husqvarna kit)

@mircomoschen8398 Жыл бұрын

The cylinder shouldn't be worn out since it's coated in nikasil which is much harder than the aluminum piston. there is a specific procedure to bore out the cylinder when it's damaged or ovalized, only then a piston from a higher group should be installed to match the new inner diameter of the cylinder

@Florian24 Жыл бұрын

that's a big ratchet for a 8mil bolt in aluminimum case

@jjjjjjjjrifufjssjosskenf Жыл бұрын

I love how people do “how to” videos their first time doing something….

@lukaspreclik2374 Жыл бұрын

Did he state anywhere that this is a how to?...

@DoctorDJ1976 Жыл бұрын

Dunlop? Jet u ride Michelin ..... u can only get Michelin.......so why advertise Dunlop (tribute or not)

@alexanderson5749 Жыл бұрын

I thought 847 was your mental age and your actual age 😂😂 mental age of 8 physical age of 47 obviously joking I've heard the story before I just had to

@michaelvick2872 Жыл бұрын

Why does it look like you live in rural America?

@PeterR0035 Жыл бұрын

Nice video! and; Haha; caught you at kzfaq.info/get/bejne/iq9lfc-pubjHfaM.html ; you have a FILM CREW !! 🙂 (360 camera slowly rising in the door portal)