Cheapest Slipper clutch on amazon broke but I fixed it for Arrma Granite

Рет қаралды 232

5 ай бұрын

Here I'm showing how the slipper clutch failed and how I fixed it.
the one I bought in the video isn't available anymore.
here's a similar slipper clutch.
amzn.to/3U6r3wf
Here's a slipper delete part
amzn.to/3SlBZ88
Blushless system I used
amzn.to/3SpNRGg

Пікірлер: 3

@sy55legrc 3 ай бұрын

Thank for this buddy, just had similar issue with exact same slipper and was a little confused haha

@BangForYourBuckRc 5 ай бұрын

Hey Gabe! I know this was filmed last summer/ maybe Fall, but was just wondering if you worked out the issue? The pin retaining collar that you drilled, is it still holding up, or did you purchase a new one. Also if you didn’t get a new clutch pad, I have found in the past that scratching the pad surface with a scotch brite pad gives them some new friction when in contact with the pressure plate. These pads tend to glaze over or get contaminants on the disc. Also a little bit of blue lock tite on the tensioning nut will help keep the nut from backing off. It looks like a good short term remedy on that collar you modified. Great job buddy. I know you either got it or will get it! Talk to you later!✌🏼👋🏻😎

@makestuffbetter19 5 ай бұрын

Hey Robby! yes it was filmed months ago. Part 2 will be out on Saturday. I love the idea of scuffing the plastic clutch plate! I'm gonna try that and see how it goes! As for the Pin, it's in great shape and is the original that came with the slipper clutch. It doesn't seem like the tension nut is backing out, but rather the holes the pin goes through are stretching, but I'll keep the locktite in mind for sure! Thanks for the comment!