CHEVY CRUZE TRANSMISSION SOLENOIDS & VALVE BODY DISASSEMBLY / CLEANING

Рет қаралды 72,644

2 жыл бұрын

Hi everyone! If you're having rough or delayed shifting, no reverse or any transmission issues, try to check ATF levels and quality first. In this Chevy Cruze, we found out a dirty ATF bec of metal shavings (normal wear) and a torn filter which may have caused metal shavings to clog the solenoids thus resulting in shift problems and no reverse. After cleaning the solenoids, valve body, a brand new filter and fresh new ATF, the issues we're finally gone. If you did this method but still having issues, your transmission might already need a complete rebuild. Hope you guys like this video and don't forget to send us some love by hitting the subscribe button! Cheers!

Пікірлер: 90

@robertocastaneda7959 2 жыл бұрын

First of all, thanks for your time and dedication to this job and sharing your experience to point us in the right direction with our transmission problems. My transmission recently went out. Started with hard shifting and recently completely stopped moving in either direction. Check engine light came on, pulled codes, several referring to the solenoids, etc. Did you receive any particular codes prior to your repair?

@btdgarage 2 жыл бұрын

Thank you 😊 Codes were P0751, P0990

@sajeevmohan7477 Жыл бұрын

Sir i got the code P0601-00 What's is the problem for this code

@wanelly Жыл бұрын

Have you cleaned yours like he has shown us?

@skumarv2447 2 жыл бұрын

Excellent video and details..God bless you, Mentioning the ATF replacement video in the description helps us to easily watch it too

@btdgarage 2 жыл бұрын

Thank you & God bless!

@ididthat1st Жыл бұрын

Bloody brilliant! Thanks Friend.

@giancarlodelacuesta1552 Жыл бұрын

Philippines need this kind of repair shop hmm common we love chevy

@Julioal100 Жыл бұрын

You are the Best. thanks from Venezuela

@btdgarage Жыл бұрын

Thank you

@DominiAeternum 2 жыл бұрын

Awesome video. Never seen a transmission repair or rebuild video as simple and entertaining and effective as this 1. I guess this is not considered a full rebuild though?? What do these solenoids that I keep hearing about do anyway?

@luckycharm7572 4 күн бұрын

I changed my TCM and valve body without having to take out the radiator and radiator fan etc. I just took out the battery and the battery box and with faith and elbow grease, turned the transmission valve cover and pulled it out. This way is less unscrewing etc.

@kcbeasts Ай бұрын

I like the explanation of parts been looking to replace my tcm is it the whole piece or just what u pointed out

@jrcoconutkiwi Жыл бұрын

im going to replace my internal mode(neutral safety switch) switch located at the top left corner above the valve body... do you know of where i can find instructions to do that? thanks 🙏🏾👍🏾

@Lyons17r Жыл бұрын

I have a 2012 chevy sonic with the 2gbs. Would this happen to be the same? I’m about to dig into it, and I have never dug into a auto trans.

@gigimarfa877 Жыл бұрын

I have no forward movement on my gearbox only reverse. If I manually shift into 2nd and 3rd i can feel a slightly bump in the seat and very little engine rev but I can't move forward. Reverse works perfectly. Can this job fix the issue ? or should i get an gearbox to replace mine ?

@jeffmoleskivintageiceracin5935 10 ай бұрын

Can I use a 2014 trans in a 2011 cruze? Same 242**** trans numbers as long as I change my tcm and solenoids?

@Juice421fs Жыл бұрын

You don't need to remove bumper and radiator. Easy to get to

@TheKeyMan12 5 ай бұрын

What was the reason for you taking it apart? I have a 2012 Chevrolet Cruz LTZ 1.4 L turbo and it’s a service vehicle and it’s been going into reverse real hard and then acting like it’s taking off and second or third gear, you can turn it off and restart it and it will work fine, but it does this nearly every day here lately and I’m thinking it’s not getting good communication from the TCM either the TCM is bad or there’s a problem in the harness or open circuit

@user-fi9xr7ni8t 29 күн бұрын

Gracias por la enseñanza, pregunta ¿Cuanto cuesta cambio de TCM?

@juliandominguez7577 5 ай бұрын

Great video but lack What Kind of tools do You use use and torch

@lisacanada3448 Жыл бұрын

How can i tell what generation transmission i have in my 2012 chevy cruze LS 1.8 liter

@MrFaizal5 Жыл бұрын

Hi...my cruze jerking at gear 2. What is on your opinion? Transmision already rebuild but the prob is still there. I hope u notice my questin. Tia

@dahmaneayoub6906 2 ай бұрын

What type of oil is needed for the automatic transmission of a 2011 Cruze with a 16 engine?

@terrycarlton6991 Жыл бұрын

Did you also use an ohm meter to test each solenoid ?

@erickcastro946 3 сағат бұрын

hey bud, when I was replacing the input shaft speed sensor on my gen 2 6t40 i dropped the check balls on accident, can I put the check balls in the location you've shown in this video or do they differ?

@gstsaver13 9 ай бұрын

Is this usually the issue (the solenoids etc) when it over revs or is it generally the clutch plates?

@samehalhalbi3869 Ай бұрын

Hello my friend, I have the same car and it has a problem only between the fourth and fifth gear. You feel a strong knock. After removing the gearbox, I found the discs broken and I changed them completely, and on the computer there is no error. Where do you think the problem is? I expect it to be the gearbox valves. If not, please reply. Thank you.

@DominiAeternum 2 жыл бұрын

Also what was the mileage of the car when this happened? Is this caused by anything negligent by the owner? Not draining & refilling fluid enough? Hard driving??

@manuelbernalcontador9189 Жыл бұрын

Quiero saber es posible que yo pueda cambiar el serenoide B

@michelleflores779 2 жыл бұрын

The valve body gasket is metal?

@jasegonzalez1 Жыл бұрын

I search the filter part number 24299030 and nothing comes up. Is it only a dealer part? Where did you purchase your new filter?

@mahinullah8562 Жыл бұрын

Hey any ideas what could be the reason my cruze struggles to reverse in a slight slope? Like it will rev up to 3k but not go I have to go forward and then reverse with full force

@btdgarage Жыл бұрын

Might be the torque converter. Best to find a shop who can do a TC test for you

@Mobile.repairing8271 2 жыл бұрын

My cruze sem problem gear shift and reverse gear please help me sar🙏🙏🙏🙏🙏🙏🙏🙏🙏

@rubenhrc5901 Жыл бұрын

Well done 👍 Do we need to reprogram the computer after doing this cleaning job? Thank you.

@btdgarage Жыл бұрын

Hi! No need as long as you don’t replace the TCM with a new one :)

@Firecracker89 9 ай бұрын

You mentioned a video to show how to remove the bumper and radiator supposed to be listed in the description I don't see it anywhere do you have it posted please let me know thank you

@btdgarage 9 ай бұрын

Hi! Here it is - kzfaq.info/get/bejne/jM-bkrajtZmbfmg.html

@taffazulrehman3515 2 жыл бұрын

Thnx

@jasegonzalez1 Жыл бұрын

I removed all the bolts to the valve body but it feels stuck wont come off as if it's fused together. I see you pulling on that top left cylinder/spindle. Am I supposed to pull it all the way to the left to loosen the valve body?

@btdgarage Жыл бұрын

Hi! Make sure to remove every bolt even the ones underneath the solenoids. The one you meant was for the shift lever, you don’t need to pull on that to remove the v.body.

@showtime-2926 2 жыл бұрын

Nice Job! How much do you charge to fix my car?

@ImranKhan-ej3fy Жыл бұрын

Hi mate. What causes the metal shavings? I have 6t40 auto trans with only first gear. Won’t shift to 2nd 3rd etc & no reverse. I have metal shavings in the valve body/solenoid area just like in this vid. Is something broken on the inside?

@btdgarage Жыл бұрын

Fine shavings is normal wear from steels & clutches/clutch material. However, if you notice bigger chunks of metal you’ll need to take apart the whole transmission for further inspection. Also, if you ever see plastic chunks in there, that must be the plastic chain cover / oil baffle which usually breaks on these transmissions, you’ll also need to take it apart in this case.

@jerichohartman2178 Жыл бұрын

What was your cause

@funkyjunky6574 13 күн бұрын

What model is this ?

@avtoblog4767 2 жыл бұрын

Respected!!! 👍👍👍

@johnwilliamson8367 9 ай бұрын

TCM how do I reprogram it

@ayokitagugat5858 2 жыл бұрын

My Chevrolet Orlando has the same type of transmission (6T45), my question: can I remove the solenoids without removing the radiator? Many thanks

@btdgarage 2 жыл бұрын

It’ll be a bit tight but yes you can if you only need the solenoid pack. I’d advise against it though if you want to remove the whole valve body as you’ll have a hard time aligning it upon reassembly :)

@ayokitagugat5858 2 жыл бұрын

@@btdgarage Thanks, I'll try soon !

@ayokitagugat5858 Жыл бұрын

I want to check the Output & Input resistance of my Cruze Speed Sensor (6T40/6T45), what is the correct resistance (Ohm) value for each sensor?

@user-kp6im7yu8g 9 ай бұрын

Hello where is the trans temp sensor

@MrJayakodisl Жыл бұрын

Thank you very much for sharing this excellent video. I have Holden captiva which is having the same transmission. It move foreword but not to reverse. When the rpm above 2500, it tries to move but not. What could be the cause for it? I’m going to change the ATF first.

@btdgarage Жыл бұрын

Hi Ajith! Your transmission seems to be low on fluid pressure. Try checking for leaks and change the ATF fluid first. There’s a number of things that may cause your problem. If changing the fluid wouldn’t solve the issue, it’s best to bring your transmission to a professional for a complete inspection

@MrJayakodisl Жыл бұрын

@@btdgarage I'm an Automobile technician Good in Japanese vehicle's problem solving, but this is first time in Holden. No any leaks. I changed the ATF fluid first(It was reddish black). Still the problem is same. I notice that there is a Creek noise in N and R position. But when I shift to D, noise is disappear and move forward well. I'm planning to dismantle it and see. Any suggestions before that?

@MrJayakodisl Жыл бұрын

@@btdgarage thank you very much for your reply.

@draco_tv_letsride 9 ай бұрын

Is GEN1 and GEN2 have the same solenoid part number or fitting and work? Can GEN2 solenoid work in GEN1 transmission?

@Ticosauce83 4 ай бұрын

From my research I don't believe so since GM reversed the function of 2 of the solenoids and also the fact there are no pressure switches in the generation 2 TEHCM so the filter is slightly different

@GTP375 Ай бұрын

This guys a gun

@sajeevmohan7477 Жыл бұрын

hi Bro what are the symptoms occur when a transmission output sensor is not working

@btdgarage Жыл бұрын

Your Check Engine light will illuminate

@sajeevmohan7477 Жыл бұрын

@@btdgarage yes engin light is on and fault code is P0601-00

@roysilvester7196 Жыл бұрын

Did anyone encountered the limb mode. I had a couple issues with the cruze mine is a 2ltr turbo charged diesel engine which is amazing regarding the power delivery anb all but recently my cruze went on limb mode and thought it might be the output speed sensor fixed it but turns out that it’s not the problem and my mechanic told it will be a gearbox issue and i have repaired my transmission which is on the way rn. So please let me know any face similar issues! Much appreciated and amazing video

@kcbeasts Ай бұрын

Have same problem saying it was my input sensor now think its tcm what did u figure out

@henm4975 25 күн бұрын

limp mode is u0101, lost of comms with TCM. most likely a wiring issue, trace the wires, test for continuity. theres a video of someone doing it on a chevy cruze

@edgardoarroyo7418 6 ай бұрын

This transmission is the same one for Cruze 2012 with the 1.4 engine?

@kcbeasts Ай бұрын

Yes

@Ty-mh3ey 2 жыл бұрын

I have a 2015 Chevy Cruz two LT and I went to go and do something today just a bit ago the car starts up the car stays in park and the gears when I try to put it in reverse it just slid down like butter. Anyone know why that is and how much it cost to fix it? I just fix this stupid thing over the holidays getting rotors and brakes and now I got to put more money in

@momofrance3964 2 жыл бұрын

I am having same problem, in case you solved your problem, can you tell me how you solve it

@wanelly Жыл бұрын

You make walking everywhere sound like a better option. Did you fix or junk it?

@XxRoFuSxX151 7 ай бұрын

Shift linkage bushing ... 11$ part gets worn and your linkage where it connects to the transmission linkage disconnect... I see it often. If there is no resistance and real floppy... otherwise your dealing with a solenoid or worse

@hannanhanry 2 жыл бұрын

Does it is shifting good? My car has same problem Thanks for the useful information

@btdgarage 2 жыл бұрын

Yes, shifting is now better and "no reverse" issue has been resolved. You might wanna try this first before taking apart the whole transmission

@seandon5649 2 жыл бұрын

my 2015 chevy malibu won't drive or reverse just revs

@Mobile.repairing8271 2 жыл бұрын

@@btdgarage my cruze sem problem sar please help me

@sabeenasasidharan8919 Жыл бұрын

@@Mobile.repairing8271 how u solved it. I experience same here. Please help

@xnitro6794 Жыл бұрын

I have a slight shift flair at 3rd/4th what would be your expectations

@aviniishdevar3136 8 ай бұрын

Same, have you fixed it?

@xnitro6794 8 ай бұрын

@@aviniishdevar3136 i thought maybe he'd give an answer but i got me scan tool and did a trans adaptive reset/relearn and went away. also i had my trans lines leaking but now only having a random during 3rd bump as it did this before the leak. have a 13 cruze lt btw

@aviniishdevar3136 8 ай бұрын

@@xnitro6794 Noted with Thanks Brother

@brayangaray8947 5 ай бұрын

@@xnitro6794hey I need to do a relearn on my transmission as well which scan tool did you use

@xnitro6794 5 ай бұрын

@brayangaray8947 xtool d7 it's about 400