Choosing the Best Stem Length for Your Bike

No video

Choosing the Best Stem Length for Your Bike - BikeFitTuesdays

Рет қаралды 228,365

Cade Media

Күн бұрын

Пікірлер: 311

@JoJoLaPompa 3 жыл бұрын

I swapped my 100mm stem last week for an 80mm. This was a game changer, I no longer have this feeling of being too stretched out. I did it based on James statement that feeling stretched out usually translates into being way too stretched out.

@ollieb9875 3 жыл бұрын

Ye, I went from a stock 110 I think it was to an 80 and back at 90 now for a while. It's not dialed in quite yet but the weather's been shit so! I do think it's made a difference. Much better. 👍😀

@sisophous 3 жыл бұрын

I plan on doing exactly what you did. I came up with the idea after comparing by two bikes. One feels like a better fit and that is the bike that does not make me feel stretched out. It's about 7/8" shorter stem and just feels better. It will cost me ~$115 but is worth it if it makes the ride improved.

@JoJoLaPompa 3 жыл бұрын

@@sisophous if you don't want to spend too much ask your bike shop if they have demo stems so you can try before your buy. Otherwise buy a cheap one check if the size is correct and then go for the fancy carbon stem 😉

@anthonygsimon 3 жыл бұрын

@@JoJoLaPompa some shops will also let you swap them out for a different size within 30 days, I went through 4 before settling on the one I really like.

@TheChapMX 3 жыл бұрын

I'm glad to see this worked, I just got an 80mm to replace my 100mm and everywhere I've read said this is wrong wrong wrong. I feel good but get neck pain after about 2-2.5 hours. Trying to determine if its a fit issue or something I need to condition.

@joewilson1857 3 жыл бұрын

These videos are the best advertising James could ever want. Ever time I watch a bike fit Tuesday I want a bike fit from James. Maybe one day I will 🤔😂

@HumaneNewt 3 жыл бұрын

Pity about the 4 month waiting list :(

@joewilson1857 3 жыл бұрын

@@HumaneNewt gives me time to save up haha

@Fit1stbuylater 3 жыл бұрын

@@HumaneNewt would you rather be fitted by someone with a two day lead time??

@Fit1stbuylater 3 жыл бұрын

@@HumaneNewt but in all seriousness, second studio is almost finished so the lead time ought to come down - if you book a session we’ll call you to bring it forward

@robbchastain3036 3 жыл бұрын

I agree and it'd be fun to just enter his shop and look around and join the television audience for Bike Fit Tuesdays. And I could see James being like the surf shop proprietor in the skateboarding movie Lords of Dogtown--"Hey, this isn't a museum, if you're not gonna buy anything, get outta here!" lol and plus it'd be nice to get a photo with Bones.

@ihashup 3 жыл бұрын

I just come here for Bike FIt Tuesdays that are posted on Wednesday and recorded on Sunday.

@mepnababan Жыл бұрын

Stop it 😂

@sebastianmanriquez7376 3 жыл бұрын

As a person who lives all the way around the world from London and otherwise would not be able to afford a bike fit, I really appreciate this videos. Time for experimentation.

@hugocarvalho1831 3 жыл бұрын

I never thought there was anything wrong with my bike until, I bought a smart Trainer and started doing indoor training. Then I started getting really uncomfortable, my back hurt, my butt hurt, my hands hurt... Never felt like that when I was on the road. Then I came across these videos, and this particular one made all the difference. A small investment later ( smaller than a new bike that is ) I now feel ultra comfortable on my bike, less pressure everywhere . Top class guys !

@gregp3522 3 жыл бұрын

I purchased my dream bike BMC SLR02 54cm this past summer. At 5'8" (30" inseam, shortish torso), it is on the large side for me but in a year with no bikes available, close enough. After riding most the summer with the seat pressed fully up, I finally swapped out the 100 mm stem for a 70mm. It made a big difference in how the bike fit feel feels (does that make sense). Now my seat is more central on the seat post and pedaling feels right where it should be. And yea, pressure on the hands is less with the smaller stem.

@richardlocke7264 3 жыл бұрын

I'm 198 cm tall (6'6") two of my bikes are 64cm bikes with 120 mm stems, my gravel/cyclocross bike is 61cm frame it had a 120 mm stem, it was too short I felt cramped. Put on a 140 mm stem, and it just feels much better. GCN did a video on stem length and they found long stems felt better, and maneuvered just a well.

@deanwaller1029 3 жыл бұрын

I switched from a 100mm stem (-7°) to a 110mm (-6°) after feeling to 'squished' while riding, I kept finding myself at the very top of the hoods in order to feel comfortable. It made so much difference, not just to my comfort but also the stability on fast descents.

@daveharris9916 3 жыл бұрын

I'm in Florida and have been a bike fitter for over 10 years. These are great vids! Thank you

@JH-fk8ow 3 жыл бұрын

head tube angle also gets steeper with every frame size up, or every second size depending on the manufacturer. That means the 44cm frame size with 70~degree headtube can have exactly same handling characteristics with 60-70mm stem compared to 55cm frame wit 72degree headtube and 100-110mm stem

@abritandhisbikeinpoland6802 3 жыл бұрын

Seat post angle? Top tube length? Stem length? Stem angle? Spacers in the head set? E = mc2 and on it goes!

@tomreingold4024 Жыл бұрын

Francis, Jimmi, and everyone else, thank you so much. You folks are on fire these last few weeks, providing more information than anyone. And you’re fun, so thank you again.

@thedangerbag 2 жыл бұрын

Put a 80mm on my already agile and aggressive race bike. It makes it feel snappy and prone to speed wobble, but I absolutely love it. Sure, I have to shift my weight around to stop it bucking me off at anything over 30mph, but that's part of the fun.

@SuperJungeJunge 3 жыл бұрын

Short reach bars are the best kept secret to keeping a "pro" stem length

@Cade_Media 3 жыл бұрын

Hahaha genius!

@Sir-Prizse 3 жыл бұрын

That's why I use Specialized short reach bars!

@Woopigmavs 3 жыл бұрын

Agreed. Love my specialized short reach bars! Especially for only about $30 USD

@rexringschott 3 жыл бұрын

I bought an 80mm stem to replace my 100mm based on the earlier video. I hope I haven’t gone too far. Nothing to do now but install it and try it.

@7easternrider 3 жыл бұрын

How does it feel. I'm going to the same route.

@jasonsowell2288 3 жыл бұрын

This series is great. Informative, entertaining, compelling. Bonus: James's mannerisms remind me of Hugh Laurie (mostly in his role as House).

@Goproflying Жыл бұрын

Annoyingly my bike fitter recommended a M/L frame with at least an 80mm stem despite telling me I have long legs and short arms. I ended up ignoring his advice and buying a M with a 60mm stem, and the reach is still too long.

@aragaomrcl 3 жыл бұрын

Guys you are the best in bike fit discussions. Amazing how much we learn about fitting with your videos. Really congrats and thank you.

@terrancesmith5389 3 жыл бұрын

For what it's worth. A 5 time Tour de France winner once told me that your stem is to long when. You can't push back into the saddle without creating dynamic tension through the arms and back. In other words you "wind up" your upper body for leverage, transferring it through the legs down to the pedals to produce more power.

@terbennett 3 жыл бұрын

I think pros go for longer stems due to the fact they race on the smallest frames they can be fitted on. I am more concerned with handling when I'm fitted. My goal is to stay with a 110 cm because I like the handling, but that depends on the frame. When I used to ride Treks, I rode a 60cm frame size with 110; With my Felts and Cannondales, I ride a 58 with 110. I can go 60 on those as well, and drop to a 100cm stem and the handling would feel similar due to them having longer top tubes than the Treks I used to ride.

@mountaintruth1deeds533 3 жыл бұрын

Stem length is really a matter of torso and arm length in relation to top tube length. It is a bit different for every one. As well bar height to seat height.

@dfarrar23 3 жыл бұрын

Thank you Francis - James is the "Bear on the Bicycle" great visual for the demonstration

@thomasgrantham7499 3 жыл бұрын

Loving all of these bike fit Tuesday videos! It would be really cool if you guys could do one on how to do an at home DIY bike fit. I understand that James does bike fits for a living so this idea may seem counter intuitive and has probably been asked countless times before, but having a reasonably quick video guide with some step by step tips about which area of a bike should be fitted first, and then what to fit next, and so on would be great. Either way, love the videos! Cheers boys!

@michaellynn9763 2 жыл бұрын

I’ve actually just spent about 7 hours over a period of 3 days…achieving absolutely nothing! I tried to set my new bike up like my old one, which is actually 2cm too small, though I do have short arms in comparison to my legs, so felt it would be approximate! OMFG was I wrong! The back pain on the new bike, which I think was influenced by the saddle, was chorionic! The inseam length x 1.09 is quite accurate at getting the correct leg angle but this usually results in having to slam my stem at exactly 1 metre from the bottom of the pedal stroke, thereby increasing the angle to the handlebars, the effects of which I was able to offset slightly by buying an endurance frame, though you’d feel the difference on an aero race bike. What recently occurred to me is to calculate the difference between the ideal saddle height (1 metre for a 36 inch inseam) and the top of the handlebars (use a spirit level to find a horizontal line extending from pedal, or simply use stack height) and if it falls around the 10-12cm, I think it’s approximately correct. I think it’s just generally trying to maximise one thing with only a slightly compromise on the other, unless it’s truly a custom bike. Increasing or decreasing the saddle height changes the angle of the knee, which necessitates fore/aft adjustments, which could potentially affect reach and possibly a change in crank length if you can’t get saddle/knee in the right position. Because of this never ending process on the route to perfection, I’ve just accepted an “acceptable position”.

@AndrewBlucher 3 жыл бұрын

Good work ... as usual! There's always one nugget of gold. This time it was that a short stem can lead to high speed wobble.

@scottmcrobb6937 3 жыл бұрын

Lawrence needs to watch this. He was still wobbling in Italy with Sav.

@Rose.Of.Hizaki Жыл бұрын

Also as point of note. If you are quite friendly with the people down at your local bike repair shop. You could always ask them if they have any old, unwanted or trashed stems in their parts bin that you could borrow to try out which feels more comfortable for you. Even if they let you have something for free - always remember to tip them some beer money for going out of their way for you.

@SAMGB4H 3 жыл бұрын

Recently changed from a 100mm to 80mm and haven't looked back. I no longer get hand numbness and shoulder pain

@TheMerckxProject 3 жыл бұрын

I noticed you used the same clip of James talking about over-extending reach in last week's video about frame sizes.. Which, ironically, is what made me take a look at my own stem lengths. I've been fighting saddle comfort forever, and I now think it's due to the extended reach...even tho I like to ride long and low...but I suspect it was pulling me too far forward on the saddle. So I've gone back to the stock stems and will see if that alleviates the problem.

@LukezyM 3 жыл бұрын

Also try a more comfortable saddle. And don’t believe that mantra that the problem is not in the saddle. Especially if you’re a little bit heavier like I am. It made my riding so much more enjoyable, when I bought a comfier saddle.

@looee___ 3 жыл бұрын

New life achievement discovered: get a bike fit with James. Hopefully when there is no more virus and travel is sorted...

@cyclenutter2715 3 жыл бұрын

Monday Tuesday Tuesday Thursday Friday Saturday Sunday

@jameshawkins5843 3 жыл бұрын

Tuesday Tuesday Tuesday Tuesday Tuesday Tuesday Tuesday

@cyclenutter2715 3 жыл бұрын

@@jameshawkins5843 Hahaha even better!

@TheDiplomaticAcademy 3 жыл бұрын

Hi, thanks for the video, it helped me alot. For some reason my bike came with 2cm longer stem than it must be for that bike model and I wasn't able to set saddle height correctly for months until I saw your video and figured out that stem was too long for the bike model and for my comfortable reach! Regards.

@Thisisrance 5 ай бұрын

I just bought a bike as that was originally used for gravel racing. I primarily do city riding and gravel trails. It’s a 61cm frame with a 130 mm stem. For reference I’m 6’4 with pretty damn long arms. I actually use standard length golf clubs if that means anything to y’all. The stem looked super bad ass and I did my best to make it work, but found myself constantly adjusting the handlebar, position, saddle and break levers to try and find something comfortable and didn’t feel like I was reaching for the brakes. Even with my n neanderthal reach it was wayyy too aggressive. Went to a 90 and it’s a whole new bike

@S2Sturges 5 ай бұрын

Many years ago, I was at a trade show in Canada and had lunch with Greg LeMond, me and a few other reps. Chat got to bike fit and rule of thumb measurements, and Greg suggested that a quick check of a stem length for a bike fit was to have the rider have his elbow on the nose of the saddle and extend his fingers outward over the stem. If the fingertips were about halfway up the stem's length, it was more or less correct length ... It's actually not far off, I found out over the years

@leroyyoder3494 3 жыл бұрын

Thanks Francis and James. I have found that as I have gotten older, I am overextended on my 100 mm stem. I recently had a fit on my current bike to tweak my position and will be going to a 90 mm to improve my position.

@williamsmothers8830 3 жыл бұрын

I bought a used Cervelo about 4 years ago and it rode and felt better than anything I had ridden prior. However, I am learning to set it up better and why I have some discomfort from watching this channel. I have already adjusted the seat forward - it was too far back, and lowered the seat, both of which have helped tremendously. The bike did come with a shorter extra stem - I am off the install that! Thanks Francis and James!! If I am ever in the position to get a new bike, part of the cost will be a flight to London to see James.

@Kimberly_Sparkles 3 жыл бұрын

I'm just glad stems are clearly a stand-in for something. I was worried that double entendre would be missed.

@ViniciusOliveira-fg8yl 3 жыл бұрын

BFT are wonderfully useful no matter when it's recorded. Great work!

@kellymcbram3939 3 жыл бұрын

My 5 year old loves James. Her words earlier were ‘That man looks like a burglar’ 😂 So... having bought my road bike back at the end of August (without getting a bike fit first, because I didn’t even know it was a thing), and averaging around 150k a week on it since, I don’t have any pain anywhere. But watching James’s videos makes me feel so paranoid that I think I should get a fit done... but don’t want to be told I bought the wrong size bike. So my question is... bearing in mind I’m 42 and riding for fun and fitness rather than to be competitive, should I bother trying to fix what isn’t broken, or do you think that I could make my rides even more enjoyable if I got one done? Thanks for all the content guys. Hope you’re well.

@gregp3522 3 жыл бұрын

why would you consider to fix something unbroken? Now you are riding in that magic zone (150km/wk) where you might start to want to get faster. You know, just to see how better you can get. Then you'll go out a get a power meter to measure your output. When you do that, you'll want a bike fit to maximize your output.

@williamcurtis8827 3 жыл бұрын

I love these videos makes me rethink my set up

@db613 3 жыл бұрын

If you're riding on the hoods you can compensate for a longer stem by simply moving the hoods further up the bar, but then still have that deep aero reach for the pulling efforts

@andycorso8498 3 жыл бұрын

Mine’s shrunk over the years.....just sayin’

@jauxed 3 жыл бұрын

lols

@npc4188 3 жыл бұрын

but what about the girth??

@brauljo 3 жыл бұрын

@@npc4188 Mountain bike stems are chodes, short and girthy.

@cliffcox7643 3 жыл бұрын

Was it due to cold water?

@SuperJohnnyO 3 жыл бұрын

Were you in the pool?

@echtogammut 3 жыл бұрын

Back in the 90s I had a 130mm stem on my 'mountain bike'. Mind you, back then, a mountain bike was a road bike with nobbies and a front suspension fork ... if you were a baller. A fun video or series would be to have James do some reaction videos watching the old Steve Hogg fitting videos. I think he collected the craziest negative rise stems, then started a fitting business to convince people to purchase them off of him.

@thedownunderverse 3 жыл бұрын

Interestingly, Giant's SL stem now comes in a 0 degree option. Much like the Specialized hover bar, I think this is a silent nod to the point James has been making - race bikes are not the right bikes for most people!

@jbratt 3 жыл бұрын

You will only get my 14cm stem when you pry it out of my cold dead fingers 😄. I am 6’2” and a former cat 2 racer. I have tried shorter, it just doesn’t work. Thanks for the video 👍

@JibbaJabber 3 жыл бұрын

Chaps, did you mention that you can turn them upside down, to have say + or - 7 using the same stem? #The angle of the dangle !!!

@MyDemon32 3 жыл бұрын

7:00 I live with the first option. I use a size 44 bike with a 175mm stem i got from ebay. Even if i'm 184cm the bike feels quite good, of course my seatpost has to be longer too so i get a kind of Midosouji style of bike XD

@pelisinho 3 жыл бұрын

Kimo...kimoi!

@LukezyM 3 жыл бұрын

Maybe get a proper size bike.

@overcast2018 2 жыл бұрын

Get a proper bike size rather than pretending to be an anime character,

@draggerlane04090 Жыл бұрын

I'm 5"8. I have a 1998 Trek 5200 Frame size 56cm Stem length 110mm Steerer is cut to 5mm spacer under the stem.

@HarishChouhan 3 жыл бұрын

After watching so many of these videos, I'm doing bike fitting myself since there is no one who does it properly in Vietnam.

@danielmoorhouse6506 3 жыл бұрын

Handlebar width and reach are factors to consider for overall reach.

@Cade_Media 3 жыл бұрын

Yes of course

@alcalcagno 3 жыл бұрын

@@Cade_Media Considerations regarding long stem+short reach handlebars vs short stem+standard reach handlebars? E.g. any difference in bike handling (assuming that the length of stem+handlebars produce the same reach)?

@TheNisms 3 жыл бұрын

These videos make me realise I have no idea what I am doing :)

@user-cx2bk6pm2f Жыл бұрын

I 100% support cycling for the mentally handicapped. You both are very brave! 😀👍

@justinofboulder 4 ай бұрын

Thanks for the video! I have always had to size up in frames (5'5" with longer arms and legs, shorter torso) and almost always have had to size down on my stems. Recently I bought a used "endurance" geometry road bike and am trying to get my position similar to my gravel bike (which fits me really well). I compared the geometry of the two before buying, and based on that, and the physical measurements, it does seem that my stem might need to be longer than the current 100mm. I will put some miles on it as is first, and may schedule a fit (here in Colorado). Appreciate the content!

@stevestewart-sturges2159 3 жыл бұрын

Been running a 12 since I stopped racing in the early 90's, I raced using a 14... my lumbar has been thanking me ever since..

@ivarbrouwer197 3 жыл бұрын

Negative rise stems: I like them, I sit aggressive but comfortable on the hoods and only use the bends for descending, massive headwinds and sprinting. For those instances the discomfort weighs less then the benefits of having a lower position.

@nomadcarpenter8549 4 ай бұрын

Im 187cm At 17 -17° 130mm stem 565mm top tube 165mm head tube At 33 -6° 120mm stem 575 top tube 190 head tube Both were comfortable setups considering my flexibility.

@z1522 3 жыл бұрын

Given one's hands are riding the hoods typically, about 22-26 cm from the steering tube, I have ridden stems from 100mm to 45mm, with actually far less sense of the supposed twitchy changes predicted. Moreover, at road speeds steering is initiated by leaning and pushing down on the bar, and paradoxically, riders eating or drinking will often leave the one hand near the steering tube, precisely because leverage is reduced, and one is less likely to deflect the front wheel with a slight push or pull. Myths can be easily dispelled with simple experiments.

@Thejour689 3 жыл бұрын

Here for all of this, always informative!!! Thank you once again, Francis. 🙏🕊

@blakegboi1347 3 ай бұрын

Went down the rabbit hole of bike fit James videos and have noticed him say a few things i find peculiar -James says most people shouldn’t buy race bikes - says people buy bikes that are way too big for them (Said he is 5’10 or 5’11” riding a 52 or 53) -says 120mm stem is rare and if ur on a 130mm the bike is too big How does a man that tall fit on a bike that small and not use a 120 or 130 mm stem?? 😂😂😂

@leebridgwater 3 жыл бұрын

This channel is so useful, perfect info so I'll stick with my 90mm

@randomescu 2 жыл бұрын

on former bike i installed an adjustable stem to rise the hamdles up. on my new bike i just got an extender and attached the original stem to it.

@scottthorpe1601 3 жыл бұрын

Thank god, something has returned to the norm. Bike Fit Tuesday, not on a Tuesday

@benjaming.2218 3 ай бұрын

I shortened my stem from a 100 to a 90 to relieve pressure on my hands and shoulders. I was feeling stretched out with the 100. The handling is a bit more twitchy now than when I had the 100, but it’s something I’m looking forward to getting used to.

@JonathanWhoever 3 ай бұрын

Did you keep the same degree of rise/drop?

@JonathanWhoever 3 ай бұрын

@@benjaming.2218 thanks

@benjaming.2218 3 ай бұрын

@@JonathanWhoever it’s actually 6 degree rise.

@JonathanWhoever 3 ай бұрын

@@benjaming.2218 thats what I thought you meant. Thanks

@xelseartheonlyone1267 Жыл бұрын

Okay i am a heavy big dude. I ride an endurance all road bike. And i had a 100mm stem with 7 rise. I was kinda okay, till i got an ISM saddle. I love the saddle but i had to push it all the way back to actually feel comfortable on the pedals cause my foot would be too far forward before. Okay that resulted in the handlebars being too far for me. So i got an 80mm stem with 7 rise today. The bike became like 10 times easier to handle. But because of the short length and the rise my position is too upright resulting in a weird feeling and saddle sore. So what do i do now? I turn the stem upside down to make it negative 7 degrees? Or i just place it further down on the spacers? I really need a more bent position, now that i have a shorter stem i feel that i will shine. Especially in my long rides. I still haven't managed to do my first 200km...

@deanlevett888 3 жыл бұрын

Good video, I bought a ridley helium xxs with a 90mm srem.I'm only 5ft 2. I felt hunched up on it. The shop suggested that I needed to stretch out and I needed a 120mm. I ended up using a 100mm that was a better fit. It's a bit trial and error, I found.

@lfoster7601 2 жыл бұрын

Average height (5-11), but really long arms. Most of my bikes running 130s on frames with 55-57cm top tubes (horizontal). However, while I do believe I'm positioned on a more extreme stem length, the main reason is the arms - Ape Index of +9 (My arm span is just over 9 inches longer than my height, which is pretty unusual, but handy for swimming) . I think this really messes with the fit parameters. I tend to stick to older "traditional" frames as the the newer ones (especially mass produced in "Med" or "Large"), just fit really badly for me. My fitter tried to move my saddle forward and put me on a 120 stem, but I felt cramped and reverted after a while - this could also be the result of 40 years of the same position though. I do still try the shorter position every time I build / rebuild a bike, and I always end up slamming the saddle all the way back and sticking a 130 on. Great videos, try not to miss any.

@JeffOehlsen 3 жыл бұрын

Love these videos. Love that they never come out on Tuesday, and I refuse to watch them on Tuesday

@palicar 3 жыл бұрын

Sometimes my reach feels too long and I realize my pelvis and lower torso are slouching lazily. Then I tighten it up and it’s better. Too many moving parts!

@achn2b 3 жыл бұрын

What about the old saw that, when riding in the hoods, the stem should be long enough so that the bar blocks your view of the front hub?

@spade6240 3 жыл бұрын

I don’t understand why everybody is obsessed with such short stems these days, I hate the feel of having too fast and erratic steering and run between 60 to 70 and ride downhill / enduro

@Mathiasbendiksen 3 жыл бұрын

What if i have a too small bike. It have 90mm stem, can a 110mm stem help and i can set seat 10mm back? I get hurt in the lumbar spine after 15 minutes on the bike right now. I think the frame is 53 and i usually use 56.

@louisGauto 3 жыл бұрын

I'm 5'8 and have short arms and ride a size small(52) bike the the reach is 373.3mm and the top tube is 530.8mm. I had to go with a shorter stem because it was still a reach, so I went from a 90mm steam to a 80 and still think I may switch to a shorter stem, I am now wondering If I should just ride a XS bike and if need be go with the opposite and get a longer stem if the bike feels to cramped?

@user-cx2bk6pm2f Жыл бұрын

For all the knowledge, I've never seen this guy actually riding a bike 😀👍

@HawkyMagix 3 жыл бұрын

I use a 130mm stem on a 59cm frame and I'm 184cm, surprisingly it's fits me well

@stevebrown7281 3 жыл бұрын

There’s some good stuff there trouble is people expect to be comfortable off of a few hours a week riding that will never happen and generally those people will also be far to heavy to support there weight in my 40 years of cycling/racing hours in the saddle is the key with a decent riding position👌

@jp93309 3 жыл бұрын

70mm, +35 degree incline on slacker head tube on my gravel bike. Steering more precise now. Not cool looking but comfortable as hell.

@chronometa 2 жыл бұрын

I'm 5'5 and I was definitely stretched out on an 80mm. So Im thinking 70mm with a smaller 17 degree tilt.

@30nabster 3 жыл бұрын

If I reduced reach by 10mm but lost 15mm height how would that impact?

@kristianrobinson5856 3 жыл бұрын

Booked!

@zenmasterfu 2 жыл бұрын

I really love this advice, that if you feel stretched out, you're way stretched out. This is my situation, complete amateur, measured my stem, it's 130 mm. Time for a ... downgrade ?

@bmw-e30 3 жыл бұрын

Great uncomplicated and practical information there.

@wmlarch 3 жыл бұрын

Pretty funny, I have that exact 3T stem in a 130mm on one of my favorite bikes! 😂And it's probably my best handling bike too! Admittedly it's a hair small so the stem puts the bars in the perfect spot for me, it just clears my knees when I'm standing and sprinting and still has a very lively ride. My other bikes have a longer top tube and I have the normal 110mm stem.😎

@finnrasmussen2855 3 жыл бұрын

Man these bikefit videos are dope!!! MORE MORE MORE!!

@smaug3045 5 ай бұрын

I am 5'10.5 with 30" leg and long torso, so I find a 120mm just right

@thiagobartolo 3 жыл бұрын

The main problem facing bears on bicycles? You guessed it! Excessive saddle height

@jbaccanalia 2 жыл бұрын

You missed the 2nd most crucial factor in fitting a bike. The stem effects the diagram tension and lung expansion. A slight adjustment makes a big difference.

@tandemoniousd8493 3 жыл бұрын

Your videos have been invaluable to me.

@brauljo 3 жыл бұрын

6:59 Or you ride a flat bar hybrid. I've got a 15 cm stem because narrow flat bars reduce the reach significantly relative to drop bars.

@keldskriver Жыл бұрын

Hey! You touch on the topic of stem angles in this video. It made me wonder - Do you ever install, let say a standard 7degree angle stem to have a rise when you are performing fits, or do you allways install it with a drop and only consider the length? And if so why? Looking forward to your answer, Best regards Keld from Denmark

@leighharwood9415 3 жыл бұрын

0:04 .. that has to be the quickest James has moved in a while 😂 Another great and informative video 👍

@Fit1stbuylater 3 жыл бұрын

You should see me move when the bar opens

@leighharwood9415 3 жыл бұрын

@@Fit1stbuylater I'm an old geezer but I reckon I'd give you a run for your money getting to the bar first 😉 Keep up the good work, it's much appreciated 🍻

@jacobeleven77 5 ай бұрын

Doctor House of Bikefitting

@garydyjak3404 2 жыл бұрын

I have a mid 90’s Mondonico traditional steel frame. It’s a 61cm center to center and a 120 stem length. One thing worth mentioning is in the beginning of the riding season it feels a little long. By mid riding season it feels perfect. I believe our bodies transition and tend to stretch out as we become more limber. Does this make sense to you. Just wondering what your opinion is. Thanks for all the great tips, especially on saddle height and cleat fore and aft. I dropped my saddle and feel more comfortable. Now I will work on moving my cleats back once I get my new CX332’s. I have a old pair of Lakes about ten years old and been riding with the cleats all the way forward.

@richardcarr6493 2 жыл бұрын

l tried to go longer stem ,great for the drops but l don t ride there all the time !! l went back down to 100mm immediately felt better !! l can t see going 120 or longer unless l go a much smaller frame which l really do like toe overlap . lf l ever get another bike it ll be a Med gravel bike in metal ,more durable preferably cromo steel .

@lawrenceo7372 2 жыл бұрын

Got a new road bike. And the bike guy suggested I increase my stem length. So watching to see why stem length matters

@justtheotherdave Жыл бұрын

Does a longer stem *really* make handling sluggish? Coming from the motorcycle world, it's well established that transfer of weight to the front wheel (e.g. during braking) makes the steering more sensitive / "twitchy". Seems to me that a longer stem (or lower) moves a significant proportion of your weight from the seat to the bars. I've been on a quest to drop weight off my bike (decent frame which was fit to me by the LBS with a 40 mm stem, 170 mm cranks. 40 cm bar width at the horns) and after switching to aero carbon wheels, the handling feels quite twitchy. Tried a 70mm stem and I'm undecided if I like the increased reach and the handling isn't significantly different. Considering slightly narrower bars to see if this improves my reach and/or lessens steering input to improve the situation. I'd run fatter tires as this is also "slows" steering (again, coming from the motorcycle world) but my frame and rims can't take anything wider than I have now (25 mm tire width). Full disclosure, I'm nigh 20 years older than when I bought this bike (excluding it's really only the frame and forks that are original) and I'm afraid to find out the real solution might be to move from a size 54 road bike to a size 52 gravel bike... I'm 5' 8"(173 cm) and I'm told I have a rather longer torso and shorter legs than expected for my height.

@FinlayDaG33k 3 жыл бұрын

So, James only talked about a *negative* stem angle (one that points down)... But what if you take one with a positive stem angle? I mean, you'll be upright more and MUH AERO... but what if you're just riding around and not trying to set the best time?

@edmundscycles1 3 жыл бұрын

I flip my stem for possitve rise . Its way more comfortable for longer rides . Nowt wrong if your not racing .

@glenngoysens8372 Жыл бұрын

Hi, I'm thinking about buying a Stevens Arcalis 58 (mainly because it is one i can get my hands on relatively quick). The guy that sells it says that it is not okay to put a 100mm stem on that bike because my center of gravity will be too far back. He also says that because of my length (186cm) a 110 should be no problem. Nevertheless... My current bike (that's sadly total loss) has a 10mm smaller reach and a stem of 100mm... So, yeah, I'm not sure what to think or to do

@aguswahyudi710 3 жыл бұрын

Someone said to me before the rule of thumb about the stem length is we can see the front hub with our eyes while riding position is in the hood it means its the correct size? Thought on that James? Much appreciated.

@zkjellberg 3 жыл бұрын

I'm confused. In the previous video, you highlight most consumer purchase bikes that are too big for them, but then you state anything over 120mm is too much. I'm guessing James recommends a smaller frame with a 90mm~ stem? For myself, I ride a 58cm with a 110mm stem and consider downsizing to a 56cm to a 130mm, but I race and am comfortable with a more aggressive position. (Yet my gravel bike is a 58cm with a 90mm stem in an upright position for comfort and confidence descending)

@Cade_Media 3 жыл бұрын

The 110 on the 58 will probably ride more nicely than the 130 on a 56. Sounds like you've bought the correct size frame from your comment!