Sub Up, Port Back, Kerfed Slot Port Stained Plywood Subwoofer Box

No video

Sub Up, Port Back, Kerfed Slot Port Stained Plywood Subwoofer Box

Рет қаралды 106,585

Күн бұрын

The very long awaited build by many is finally live and direct! The double baffled plywood top mounted subwoofer box with kerfed L ports and kerfed front baffle. Made out of a very expensive Santa Clara marine plywood, exclusively sold at Wilcon Home Depot.
This is a single 12 inch enclosure for the huge Category 7 CSW12-1K XMAX subwoofer! The magnet of this subwoofer is literally almost the diameter of the cutout and weighs about 20 kilos. This enclosure features a kerfed port, and another kerf on the front panel corner, double layered baffle including flush mount, and a beautiful custom dark stain.
If you are interested about the box dimensions, head to this link to TinkerCad schematics: www.tinkercad....
Finished the box with very dark oak oil wood stain and topped it off with polyurethane varnish to protect the subwoofer enclosure from all kinds of elements.
I am glad I hit the appropriate final tuning and impedance for the box which is 30.24Hz @ 1.51 Ohms on the Dayton Audio DATS v3 and has an acceptable effective bandwidth of 23Hz to 46Hz range.
All panels were screwed down the pocket holes for the upper panel to make them invisible. Lower panel is screwed the traditional way because no one can see the screw heads down below the box.
Assembly time and here goes lugging the very heavy Category 7 CSW12-1K XMAX! The monster of a subwoofer weighs about 20 kilograms, yes that heavy.
I think that is all for today's little show and I hope you all like this project. Let me know what you think by commenting down in the comment section. Thanks and have a nice weekend to all of you.

Пікірлер: 343

@tinasharma620 3 жыл бұрын

This men born on the earth only for make best subwoofers in the world 😎

@chrclmnky 3 жыл бұрын

Thanks Tina. 😂😎

@tinasharma620 3 жыл бұрын

@@chrclmnkymy pleasure✨✨🙂🙂

@brianmosher4053 2 жыл бұрын

Couldnt have said it better myself lol

@tangomantactical Жыл бұрын

Apparently you've never been to Columbia, Tennessee.

@tangomantactical Жыл бұрын

Solid clean work. If your building boxes and don't have a Router, Brad nailer or a table saw to some degree.......your an average subwoofer enclosure builder. I'm not into the Kreig mounting system. Each to there own on that. Also if you have years of fiberglass & resin application under your belt, your a serious enclosure artist. You built that box way beyond any typical subwoofer xmax can dish out.....unless your running a prototype sub that takes 8-10K watts rms.

@alexislazarte1539 2 жыл бұрын

Your works are of high quality, it's not about what you are doing but the dedication.

@chrclmnky 2 жыл бұрын

😎🤘

@Ahm-Creative 2 жыл бұрын

You are an absolute master craftsman! I've been in car audio for over 20-years, and may have never seen a better built box....I appreciate your attention to detail! Would love to hear it.

@chrclmnky 2 жыл бұрын

Thanks. 😎🧨

@shastriroopchand1245 Жыл бұрын

Funny how I play with my doggies the same way when I'm doing box work👍🐕

@Fardeenfarwest 2 жыл бұрын

I always wonder know how to make curve bend with plywood. Hmmmm 🤔 now I know. This is the perfect 👌 enclosure I ever seen. What I appreciate in your work is you give a lot attention on every angle. Inside the cabinet. And your work is clean and remarkable. I really appreciate your 🐶. Say hi for me. Good job 👍👍👍

@chrclmnky 2 жыл бұрын

Thank you Fardeen. 💪😎

@Fardeenfarwest 2 жыл бұрын

@@chrclmnky you're welcome 😊

@eugeneirons7907 2 ай бұрын

That is absolutely beautiful 🤩

@chrclmnky 2 ай бұрын

Thanks

@XxTrustNoOnexX 3 жыл бұрын

With each video better and better work my friend. Many greetings from Czech Republic.👌✌️

@chrclmnky 3 жыл бұрын

Many thanks, Tom. 😎🤓

@ChrisTopher-ro2tn 3 жыл бұрын

Beautiful! I'm looking at building a box and the design is what I've been struggling with. But this is the look. I don't have your skill set but sure going to give it a try. PS. My dog enjoyed seeing yours on the TV.

@chrclmnky 3 жыл бұрын

Thanks. It is very rewarding to accomplish such projects. 🐩🐕

@jayjay7160 3 жыл бұрын

This is my favorite box you have built

@chrclmnky 3 жыл бұрын

Yes, mine too.

@hardystein114 Жыл бұрын

I like your little friend ! great job too.

@chrclmnky Жыл бұрын

Thanks Hardy

@RWmHII 6 ай бұрын

Inspirational. Thanks for demonstrating your techniques.

@chrclmnky 6 ай бұрын

My pleasure!

@carlospacheco8640 Жыл бұрын

Great job. Very nice box. But as the guys in the millwork shop I used to work at said. If the glue isn't spewing out, you didn't use enough. ;)

@chrclmnky Жыл бұрын

Thanks

@chrclmnky Жыл бұрын

Oh, about the glue issue, If you have ever work on oil stains, you don't want any glue to stick where you would put stain or else results will be sh*t.

@carlospacheco8640 Жыл бұрын

@@chrclmnky I didn't think about the staining. Very true. Would look like sh*t. Thanks.

@rkzooplays 10 ай бұрын

Bro box builder right here.

@chrclmnky 10 ай бұрын

👍

@martinobarranca5435 3 жыл бұрын

man now it's time for your logo on the works

@chrclmnky 3 жыл бұрын

Yes sir thanks for the encouragement.

@laurenzspeakergm9979 3 жыл бұрын

Really nice dude. I like the wood color that you use in your videos

@chrclmnky 3 жыл бұрын

Many thanks Laurenz. 🤓😋🎖️

@dannyclark9820 5 ай бұрын

Awesome work. Really nice hiding the top screws on the inside.

@chrclmnky 5 ай бұрын

Thanks. Pocket screw jig does a big difference in such projects.

@hybridstudios39 Жыл бұрын

Absolutely 🤬BEAUTIFUL WORK!!! Wish I could do 1/4 of this craftsmanship Definitely just inspired me to buy some tools. I need a custom desk for my studio b/c I don’t want to pay $4000 for one that’s not the way I want it And would love a new box for my sub, just don’t know how I’m gonna get it in the box and not crush my fingers. That’s no baby sized woofer but my deaf bonce 3515 is 70pounds and if I decide to get the 4515, that damn sub is 132pounds!! Why 😂 need more neo motors, 132 pounds for a single sub that isn’t 24inches or larger is crazy

@chrclmnky Жыл бұрын

Wow that is a lot of bass going on there. Good luck and enjoy.

@msonchan6888 Жыл бұрын

Master builder sir

@chrclmnky Жыл бұрын

👍😎

@DBUS Жыл бұрын

Awesome craftsmanship! I wish I had your skills and patience 👍

@chrclmnky Жыл бұрын

Thanks a many.

@RJayRabbit Жыл бұрын

Beautiful!

@gopaulsalick507 3 жыл бұрын

That is beautiful craftsmanship

@chrclmnky 3 жыл бұрын

Many thanks Gopaul. 🥰🥰

@XXXCRSPL 5 ай бұрын

Amazing Box looks like a art piece

@chrclmnky 5 ай бұрын

😎

@Wizardwerks 5 ай бұрын

First: beautiful box! I wasnt sure i wanted to try building one from ply, but this looks incredible and I'm betting sounds amazing. Second: I would love to see your take on a similar shallow box for spaces like a single cab truck. I'd very much like to replace my kicker comp c box with something that looked like this one. Now im going to go binge watch the rest of your videos. Awesome work! 🤘

@chrclmnky 5 ай бұрын

Many thanks. Yes i really want to build box for truck underseat. Hoping for a client that wants one.

@fleuriejeanpierre 3 жыл бұрын

You are a real mater of your trade, wish i could have you make me a box. Keep up the good work.

@chrclmnky 3 жыл бұрын

Maybe one day. Thank you Jean Pierre.

@edwingarcia3007 Жыл бұрын

Stunning looking. Good work.

@chrclmnky Жыл бұрын

Many thanks

@Jerome____ Жыл бұрын

Looks awesome.... can you do a 4th order

@chrclmnky Жыл бұрын

Someday, yes

@trentoncorbet1 2 жыл бұрын

Awesome skills 👌... Must have quite a few years building and kerfing 👍

@dontrompas1312 2 жыл бұрын

Awesome job.. looks amazing 👏

@chrclmnky 2 жыл бұрын

Thanks Don 😎🧨

@robertowens7771 2 жыл бұрын

That's a gorgeous box great job

@chrclmnky 2 жыл бұрын

Thanks Robert. 🥳

@Atelierul29 2 жыл бұрын

This one came out pretty good!

@notsure1872 2 жыл бұрын

Good looking box 👍

@chrclmnky 2 жыл бұрын

Thanks a many

@rubbensofficial5511 3 жыл бұрын

DIY must be a specific guy with all these tools

@chrclmnky 3 жыл бұрын

Yes

@austintyler7991 3 жыл бұрын

Charcoal Monkey Great box build brother. Beautiful craftsmanship. Cold in America. Minus -10-12 celcius

@chrclmnky 3 жыл бұрын

Thanks Austin. It's 31C here in the Philippines. Just the right temperature.

@Huwaki65 3 жыл бұрын

Do a pillar build next sir please

@chrclmnky 3 жыл бұрын

Ok sir will do once a customer wanting such build. Thanks.

@MistahALJ1977 Жыл бұрын

Beautiful box brobro

@chrclmnky Жыл бұрын

Many thanks to you brobro

@B1ndM4n 11 ай бұрын

someones gotta tell me the math to make those cuts for myself, thats SICK

@chrclmnky 11 ай бұрын

😎

@david029014 7 ай бұрын

nice box, when you was cutting corners with jig your fingers looked so close to blade!

@chrclmnky 7 ай бұрын

Thanks. That was normal when doing woodworks.

@trentoncorbet1 2 жыл бұрын

You make it look easy.. great vids mate 👍

@chrclmnky 2 жыл бұрын

🥰😎

@gmangarcia171 3 жыл бұрын

True craftsmanship.. Awesome 👌 a bit worried about the speaker connection.

@chrclmnky 3 жыл бұрын

Thanks GMan

@IslandVader946 Жыл бұрын

Very nice

@chrclmnky Жыл бұрын

Thanks 👍🤘

@santakhalifa4321 3 жыл бұрын

Nice sub box bro its gonna hit hard keep up the good work

@chrclmnky 3 жыл бұрын

Yessir 🥳

@xshadowthedeathdragon6075 2 жыл бұрын

Beautiful box though honestly!👌👌

@lipiuuth Жыл бұрын

Beautiful and I’m a person that doesn’t use that word to freely

@chrclmnky Жыл бұрын

Thanks for such nice feedback. 😎🤘

@ghiemeluchi7327 3 жыл бұрын

what a beautiful dog

@chrclmnky 3 жыл бұрын

Yes he is. 🐕

@OCityHardcoreBeatz 3 жыл бұрын

You do some nice work my friend.

@chrclmnky 3 жыл бұрын

Thanks a many, Edgar. 🎱🎯🏆

@cbailey2486 2 жыл бұрын

I’ve never seen a sub enclosure built so perfectly, I need one built asap, how do I reach you?

@chrclmnky 2 жыл бұрын

Thanks Charlie but I'm located on the other side of the planet, the Philippines.

@Kai77884 3 жыл бұрын

Hello a great video and a perfect job 👍👍👍👍 I loved your work from Germany 🇩🇪 👋👋👋 Kai ✌️

@chrclmnky 3 жыл бұрын

Thank you Kai. 🥳

@Kai77884 3 жыл бұрын

@@chrclmnky Hello I want to build the subwoofer. Do you have a drawing for me The link does not work E-Mail kkluge@gmx.de Thank you greetings Kai from Germany 🇩🇪

@Preface_stormy 3 жыл бұрын

Great sub box build and video.

@chrclmnky 3 жыл бұрын

🔨🥳🥰

@Preface_stormy 3 жыл бұрын

@@chrclmnky what was type of wood

@chrclmnky 3 жыл бұрын

@@Preface_stormy marine plywood

@2869may 2 жыл бұрын

Good job..! I started to cringe when I saw the pocket screws... but you used nice long screws. Normal pocket screws are not near as strong as square boxed screwed, but those longer screws should do real nice, and no visible filled screw holes. Once again really nice work..!

@chrclmnky 2 жыл бұрын

Thanks. 🥰🍺🥳

@2869may 2 жыл бұрын

@@chrclmnky People love my burn finish box it's nothing fancy, but I mitered the corners and burnt and lacquered it.. Looks pretty cool.. I built a pool table also and did the same finish. I have video's if you'd like to check them out.

@chrclmnky 2 жыл бұрын

@@2869may ok will do

@abdomination Жыл бұрын

I'm on my way to getting equipment to start making a few of my own projects. I waste a lot of money or I would have been ready years ago haha.

@chrclmnky Жыл бұрын

Go ahead and enjoy. Remember to measure twice and cut once in order to not waste material. 🤘😎

@ikerbenitez6886 3 жыл бұрын

Saludos amigo desde Querétaro México muy buenas cajas acústicas mis respetos a tu trabajo muy limpio y mucho empeño

@chrclmnky 3 жыл бұрын

Thank you very much for the nice feedback, Iker. Also greetings from the Philippines! Be well and take care there brother.

@74midwestbass74 3 жыл бұрын

AWESOME WORK BRO!!!

@chrclmnky 3 жыл бұрын

👌🍺

@denys9174 3 жыл бұрын

Create your logo man !! Love this dude😍

@chrclmnky 3 жыл бұрын

Thanks Denys. I'm working on my logo.

@colbydolby6559 3 жыл бұрын

Damn bro, your home center looks like a library. Excellent job on the box, same color as your buddy. Next make one same color as Lelo?

@chrclmnky 3 жыл бұрын

Thanks CD

@SeanOMatic 3 жыл бұрын

Great work!!!

@chrclmnky 3 жыл бұрын

Thanks Sean 😎

@xshadowthedeathdragon6075 2 жыл бұрын

I think you need more screws, I don't think you have enough. Lol wow!!

@chrclmnky 2 жыл бұрын

😎🐱

@arleypalacio9350 3 жыл бұрын

Que bien todo lo que ases amigo 👍

@chrclmnky 3 жыл бұрын

Thank you Arley. I am just still learning everyday.

@InLoveWithBass1990 5 ай бұрын

Beautiful

@chrclmnky 5 ай бұрын

😎👍

@dannanaraminaidu7853 3 жыл бұрын

Nice build bro

@chrclmnky 3 жыл бұрын

Thank you. 🤓

@celinethourier2715 Жыл бұрын

c est propre vous bosser bien pas mal de matos aussi cool

@chrclmnky Жыл бұрын

thank you.

@rowboyto156 3 жыл бұрын

i think its time to put your logo in or on the boxes you build

@jot7625 2 жыл бұрын

does it matter whether you put subwoofer on same face of port or the perpendicular of port like in this build?

@chrclmnky 2 жыл бұрын

Sub and port direction doesn't matter.

@jairorinconesperales 3 жыл бұрын

Felicitaciones amigo, tremenda caja y su fabricación excelente. Saludos.

@chrclmnky 3 жыл бұрын

Thanks very much, Jairo.

@mikep5558 Жыл бұрын

How can I get a box made by you? Seriously your work is art

@chrclmnky Жыл бұрын

Thanks. I am located here on the other side of the planet, the Philippines.

@odibryant92 Жыл бұрын

@@chrclmnky yeah that's OK. Don't matter, how much would you charge to designed and build spl competition box for 2 12" subs?

@dage5129 Жыл бұрын

@@odibryant92 hmu

@RajuKumar-eq5rc 2 жыл бұрын

I love this. I would like to suggest one thing to all. Yes, why not make all the diagonal in the box as a fully curved shape...? I saying all the diagonal area of the inside box!!. If it made how will be the output of the sound? I have comment the above in your old videos kindly consider it

@chrclmnky 2 жыл бұрын

Hello Raju, thanks for the feedback. It is all about aesthetics and efficiency. One cannot sacrifice the other.

@RajuKumar-eq5rc 2 жыл бұрын

@@chrclmnky Definitely. But kindly do like that in your future projects

@willielord6106 2 жыл бұрын

damn bro nice ass box ya skills are top notch👍🏽👍🏽💯💯

@chrclmnky 2 жыл бұрын

😎🧨

@user-jn4xk8we3z 2 жыл бұрын

Very nice 👍

@MelFireHD Жыл бұрын

That's a beaute!

@felipevazquez5339 5 ай бұрын

Walnut stain? Looks real good 👏🏻

@chrclmnky 5 ай бұрын

Yes. Walnut darken further using some black pigment.

@felipevazquez5339 5 ай бұрын

Nice!

@avhuffTeamOtis Жыл бұрын

Beautiful, song at the end killed it.

@chrclmnky Жыл бұрын

yessir

@benjamingarcia847 3 жыл бұрын

Do you let the glue dry before you put the pocket hole screws in? Why do you choose to do this? I would think it would be better to do it while the glue is still wet? I want to try this method, that’s why I ask

@chrclmnky 3 жыл бұрын

Pocket screwing will move the panels when glue is not dry.

@mdyoung5163 3 жыл бұрын

really talented✌️🙂🔥

@chrclmnky 3 жыл бұрын

Y Thanks

@caetanochabuca4869 3 жыл бұрын

Amazing building man 🤒

@chrclmnky 3 жыл бұрын

Thanks a bunch. 🥳🥰

@brokeyhub4482 3 жыл бұрын

Woooow...... it's nice

@chrclmnky 3 жыл бұрын

Thanks

@Oleg_yasikov96 3 жыл бұрын

Que buenos proyectos amigo nuevo suscriptor deberías hacernos unas muestras mas

@chrclmnky 3 жыл бұрын

Thanks Humberto. Have a nice day.

@BroGunaShekarpandi 2 жыл бұрын

Wow ! Very heavy product....

@chrclmnky 2 жыл бұрын

Yes it is. 👉👍

@williamcunningham1614 Жыл бұрын

Excellent

@topnotchcontent Жыл бұрын

I like how the Kerfs came out. How many did you do on each turn 12?

@chrclmnky Жыл бұрын

There were about 11-12 kerfs 10mm gap in between kerfs

@topnotchcontent Жыл бұрын

@@chrclmnky awesome thanks

@mauricionunez2797 2 ай бұрын

Qué madera es mejor MDF o plwywood? Me compré una de plywood de pino radiata de 18 mm, espero se escuche fenomenal, lo voy a hacer sellado y lo voy a isonorizar con fibra de poliéster.

@chrclmnky 2 ай бұрын

Hello brother, how you doing. Your radiata pine plywood is perfect for making subwoofer boxes. MDF is only good when you cover or paint the box. Plywood is perfect if you just stain it and should appear natural wood.

@mauricionunez2797 2 ай бұрын

@@chrclmnky me fabriqué un cajón sellado de plywood, pensé que tenía que isonorizarlo con algún material pero quedó perfecto, los graves se escuchan de maravilla, el único inconveniente es que me vibran mucho las ventanas jajajaja y otros objetos.

@alexmelo5047 3 жыл бұрын

Cara você é o melhor !

@chrclmnky 3 жыл бұрын

Thank you Alex. Cheers! 🤩🙂😎

@rubenmatamoros5415 Жыл бұрын

What did you use to cover the holes for the bottom part thanks, clean work you a beast! 🔥😎

@chrclmnky Жыл бұрын

Thanks. Sorry I really can't remember but I think I didn't cover the holes. I did the pocket hole technique so no screws are visible.

@adam_1dizon121 3 жыл бұрын

Nice build bro.. was wondering at the end of the video when u ran the test what was the two peak frequencies..

@chrclmnky 3 жыл бұрын

Hello Sir Adam. Thanks for noticing. Two peaks actually read the effective bandwidth which is 23-47Hz, which is actually a poor range. This is cause to cheap and unenhanced drivers like such. Good range reads between 18-60Hz, which Sundown, B2, DD, DC and such expensive drivers do.

@austintyler7991 3 жыл бұрын

@@chrclmnky ah yes thanks for frequency hz information

@chrclmnky 3 жыл бұрын

@@austintyler7991 👍

@adam_1dizon121 3 жыл бұрын

@@chrclmnky yeah man I look at all of that stuff you do on your test. I appreciate the content. 90's car audio is when I started playing with amps and woofers.. I'm sure you looked at the box when u did the layout on bass box pro or the platform u used to build the box and port. Did it show the frequency peaks and roll off on the software u use?

@chrclmnky 3 жыл бұрын

@@adam_1dizon121 Yes everything is predetermined on the software and there is about +/- 5-15% difference on the actual output. My first priority is the owner's preferred box dimension per vehicle's available space. And from there, I'll calculate to whatever nicest results. I'll spend about 48 hours with Bass Box Pro 6, DATS v3 and TinkerCad just to get the most acceptable box for a particular subwoofer.

@Chip-Monk 3 жыл бұрын

You didn't show connecting the wires to inside terminals

@escible 3 жыл бұрын

es pintura o tinta negra lo que le aplicaste? despues lo limpiaste con thinner?

@chrclmnky 3 жыл бұрын

Hello, that was just a dark walnut oil wood stain. I wiped off excess after a few minutes.

@bernardollaneta9973 3 жыл бұрын

wow.sound demo for that box please😊

@chrclmnky 3 жыл бұрын

Soon.

@arthurkariuki3018 3 жыл бұрын

This is a clean and perfect project, Hi man i have the pioneer 3003d4 600 watt rms would you mind sending me the accurate box dimesions plus the tunning level ill appreciate a lot man thanks in advance

@chrclmnky 3 жыл бұрын

Hello Arthur I am very sorry for the super late response. Kindly check this video on this link - kzfaq.info/get/bejne/orqWhcl1p-CmqmQ.html The subwoofer is TS-W3003D4 single 12". For the dimensions, there is a link to the TinkerCad schematics down in the video description there. Ask questions anytime by commenting. Thanks!

@arthurkariuki3018 3 жыл бұрын

@@chrclmnkyThankyou so much ill keep in touch

@kuyzjunofficial 2 жыл бұрын

ang tibay nito sir👌

@chrclmnky 2 жыл бұрын

oo. santa clara marine plywood

@ROBBG88 3 жыл бұрын

what are the things called that u put under the bolt were the sub mounts

@chrclmnky 3 жыл бұрын

T nuts

@tonygarner3942 3 жыл бұрын

😎 bad ass. Do you use stainless bolts for your terminal posts? Wasn’t sure what conducts the best when selecting the bolts.

@chrclmnky 3 жыл бұрын

Hello Tony, thanks for the feedback. The best bolts would be copper, for the purists.. But stainless will just do fine in most cases.

@massivehertz3869 3 жыл бұрын

Beautiful box nice work 💪just wondering if you can tell me where to get cheap inserts?

@chrclmnky 3 жыл бұрын

T nuts? They are available on most online marketplaces.

@massivehertz3869 3 жыл бұрын

@@chrclmnky lol yeah T nuts..... didn't realize my phone auto corrected me. It should have said those inserts. And thanks I will check it out.

@jerryvillanueva3571 3 жыл бұрын

nice👌👍

@chrclmnky 3 жыл бұрын

🥳

@user-he5nw4bg3y 2 жыл бұрын

สวยมากครับ👍

@chrclmnky 2 жыл бұрын

😎👌

@clintpolkjr5408 2 жыл бұрын

That is a beautiful box. Did you use a website for the box design? Or did you just go for it lol

@chrclmnky 2 жыл бұрын

Thanks. The website I used is TinkerCad, it is a web based CAD application for free, used in laying out stuff.

@candate1867 2 жыл бұрын

Hi bro I want 1

@fladoodel Жыл бұрын

🤡

@caluba_noel7523 2 жыл бұрын

what is the net displacement of the box and port displacement?. thank you!!

@chrclmnky 2 жыл бұрын

There is a link to the TinkerCad 3D schematics in the video description for the dimensions.

@trev815 3 жыл бұрын

Top skills 👌do you do design of box's for people?? I'm struggling to come up with a ported box for a fairly small space !

@chrclmnky 3 жыл бұрын

Thanks. Yes this box is for a customer.

@trev815 3 жыл бұрын

@@chrclmnky sorry i ment if someone sent you the specs of a subwoofer would you do the design so the other person could build it ? I'm uk

@chrclmnky 3 жыл бұрын

@@trev815 for $10, schematics will be provided (Tinkercad) and all the data. Email address link in About section. Thanks.

@trev815 3 жыл бұрын

@@chrclmnky awesome 👌🙏

@jeffreygarcia145 3 жыл бұрын

Can you make folded horn or tapped horn subwoofer box?

@chrclmnky 3 жыл бұрын

Will do. Thanks.

@vusal815 3 жыл бұрын

Обожаю этот канал!

@chrclmnky 3 жыл бұрын

Thanks a many. 😎🍖

@vusal815 3 жыл бұрын

@@chrclmnky 😏👍

@khanhbarber8417 3 жыл бұрын

Subwoofers sonos like

@dalegordon4289 3 ай бұрын

What kind of mounting screws did you use for the sub

@chrclmnky 3 ай бұрын

4mm T nuts