How to Wire an LED Light Bar Properly (Project Night Light Episode 3)

Рет қаралды 2,896,125

9 жыл бұрын

How to Install a Light bar. In this episode of Project Night Light, I show you how to wire an LED light bar properly using a relay. I go though every step so after watching this you will know how to wire any auxiliary light you want. At the end of the episode I show how insanely bright the light bar is!
Project Night Light Episode 1: • Custom LED Light Bar B...
Project Night Light Episode 2: • Custom LED Light Bar B...
Project Police Interceptor: • How to Turn a Regular ...
How to Wire Bed Lights: COMING SOON
How a Relay Works: COMING SOON
Wurton Light Bar I installed: www.amazon.com/gp/product/B00K...
Wire Crimper I use: www.amazon.com/gp/product/B000...
Automatic Wire Stripper I use: www.amazon.com/gp/product/B000...
Panel Clip Pliers I use: www.amazon.com/gp/product/B003...
Fuse Tap I used: www.amazon.com/gp/product/B00S...
Grommets I used: www.amazon.com/gp/product/B003...
Heat Shrink I used: www.amazon.com/gp/product/B00E...
Wiring chart I used to get the proper gauge wire: www.dropbox.com/s/sbs651puccp...
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: kzfaq.info_c...
-KZfaq Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Пікірлер: 3 600

@omerbayrak1808 3 жыл бұрын

This guy is doing his job 100 times better than regular mechanics. He is working clean smart. He deserves every single penny he makes from youtube because he saves us hundreds of dollars in diy projects. We love you Chris

@sotaboyz78941 2 жыл бұрын

Lmao

@Timsautosolutions 4 ай бұрын

Hes online you must....

@angeleaterstudios1004 4 жыл бұрын

I'm gonna have to watch this like 7 times to understand the wiring process.

@TheShonoun 3 жыл бұрын

I'm about to do underglow and I'm seeing all kinds of stuff you never see in any other tutorials. I didn't know there was a fusebox on the steering rack.

@creativejake7323 3 жыл бұрын

Same about watching it like 7 times

@petergross135 3 жыл бұрын

Wiring is so easy, it’s just electricity isn’t something we can see so it’s harder to understand. So we mentally make it more difficult than it really is.

@jackfieldsjack1061 2 жыл бұрын

just buy a wiring kit.

@Engineer9736 2 жыл бұрын

@@petergross135 Running the wires sure is easy and interesting. Just be sure that you use the right size fuse and wire gauge. If you undersize it then you can set your vehicle on fire.

@zachgeorge7738 6 жыл бұрын

"We don't want to have spaghetti, save that for dinner." -Mr. Fix 2018

@itsdimitriymedvedyev 5 жыл бұрын

*2015

@justabrokeredneck 5 жыл бұрын

Buster McCluckle 2015*

@echo5939 5 жыл бұрын

Lol

@angelicaamora11 5 жыл бұрын

2015**

@DuskBlazeYT 4 жыл бұрын

Lol

@tisaghchase 5 жыл бұрын

Can't believe this video is so old and I'm seeing it for the first time. I absolutely love your videos and they have helped me maintain and diagnose my car. Fantastic work.

@chrisfix 5 жыл бұрын

Thanks a lot!

@tisaghchase 5 жыл бұрын

I'm actually considering installing a relay for my amp and crossover. Should they each have their own relay or can they be run to the same one?

@proxyhx2075 2 жыл бұрын

@@tisaghchase It'd be better if both of them had their own relays.

@Obamastucks10128 Жыл бұрын

@@chrisfix I know this is an old video but you should do a video on the SPOD lighting control system.

@Grady_OBS 8 жыл бұрын

There are some people who ride near me that leave their bright lights on (High Beams) when driving. I installed a light bar on the front of my truck (My preference ) and so far, ive only had to turn it on twice to make the other person turn theirs off. (What I do is I flash them once with my High Beams and if they dont turn theirs off, I turn my light bar on and off real quick) (Its not the proper thing to do, but it works)

@chrisfix 8 жыл бұрын

+Zipping Basher I do the same thing haha. They shut it off all the time when you use the light bar!

@impulse9091 8 жыл бұрын

+ChrisFix my buddy has a rear facing light bar for tail gaters. works every time hahha

@kg7yts187 2 жыл бұрын

Haha, where I live, people drive with their light bars on.

@BradyPhotgraphy 2 жыл бұрын

Illegal

@Grady_OBS 2 жыл бұрын

@@BradyPhotgraphy so is driving drunk or high and people still do it.

@kland086086 5 жыл бұрын

Dude, I'm a mechanic, and I love your video. I put it in my favorites to use to teach people because your simple presentation is easy to understand and follow, not annoying, superb job bro. Bravo!

@glenniz1 4 жыл бұрын

Nearly five years later, and your video is still helping folks who love to DIY! Thanks Chris!!

@theiareproduction 5 жыл бұрын

Nearly 3,5 years later and here I am still waiting... "How to Wire Bed Lights: COMING SOON".

@fadelf.294 4 жыл бұрын

Still no (2019)

@WEMFTai 4 жыл бұрын

2020

@codygonither 4 жыл бұрын

he did it 2020 !

@chrisfix 3 жыл бұрын

Here you go: kzfaq.info/get/bejne/bZ2kZLiImbfHZ5s.html

@aksk8629 3 жыл бұрын

@@chrisfix of course we can trust Chris to deliver!

@W0mpa 8 жыл бұрын

Thats a small sun you put on your car ;)

@marunio1 7 жыл бұрын

@gijs.22 6 жыл бұрын

Thomas Wallblom one he turned it on i sad to myself jesus christ thats some light

@noahpippin3204 8 жыл бұрын

you should do a how to wire subwoofer/amp.its really easy but nobody has made a good video of it yet.

@possum2023 7 жыл бұрын

Look up Meade916 he has a lot of great videos on that subject.

@leonpravst7860 5 жыл бұрын

yessss

@jugulartheninja 5 жыл бұрын

I could do a quick runthrough of my setup that i did myself stereo, subs, 2nd battery, speaker amp and upgraded speaker wires

@JonathanMartinez-rv9ur 5 жыл бұрын

Can somebody show me to do a fuse tap into my ignition with a toggle switch for amp turn on

@jugulartheninja 5 жыл бұрын

@@JonathanMartinez-rv9ur There shouldnt be a need for a fused line for the signal wire as it operates on an extremely low current that doesnt power anything The way most would recommend you do this is to tap the signal(ON) wire leading to your stereo deck that way your amp is on when your stereo is

@mjc0961 4 жыл бұрын

"We don't want to have spaghetti, save that for dinner" No idea why, but that cracked me up. 🤣

@greenhead333 3 жыл бұрын

I love how detailed this video is. You explain the simplest things that probably should seem obvious. but its perfect for a guy like me that forgets everything 15 seconds after I heard it.

@JariMustafa 8 жыл бұрын

Great video Chris :) no one on KZfaq actually goes to such small details as you do :)

@chrisfix 8 жыл бұрын

+Mustafa Jari Thanks a lot!

@ozgultekin6100 8 жыл бұрын

+ChrisFix agreed. Keep it up, Chris! and those LEDs are crazy bright!!!!

@mtnguy 8 жыл бұрын

+Mustafa Jari completely agree. Great job on the video man

@vinnyvidivici 8 жыл бұрын

This probably the most informative and clear/concise tutorial I've seen. I was skeptical about wiring my own light bar myself, but thanks to you, I'll be probably be saving hundreds of dollars by doing it myself. Thank you for the video, Chris.

@tristan_g9508 4 жыл бұрын

Someone blinds you with their brights you can just obliterate their eyes in return

@chrisfix 4 жыл бұрын

I give them a warning flash first to be nice.

@johncao8344 3 жыл бұрын

Officer: "I wonder what's this red button do?" Dumb ways to die...

@codealtf4logn779 3 жыл бұрын

@@johncao8344 😭 😂

@trevorhaines954 2 жыл бұрын

@@johncao8344 Lmfao!

@syd8699 Жыл бұрын

My god what an incredibly thorough and clear explanation. Thank you!!

@chrisfix Жыл бұрын

No problem!

@trevorhaines954 Жыл бұрын

Chris is always good about getting to the point and explaining everything.

@Aviation101 8 жыл бұрын

Wow. Insane intensity.

@chrisfix 8 жыл бұрын

+MrAviation101 Yea it is 40,000 lumens!

@Beeyouarekayee8 3 жыл бұрын

Intense insanity

@Payzme13 3 жыл бұрын

@muaddab world gcfccffhfjtfjfdheijohhhehfffuyvtcreih Sedgddfcd DYBUDHVCFJFFXJGCRDTUDTIVGFUCCU 🤗😃😀😗😙😚😘😍🤩🤗🙃🙂🤣😂😅😆😁😄😃😀😂

@Payzme13 3 жыл бұрын

Hyggyvtestdygvgdfzsrrfgfdsttdxdrdxruy fhffgyc

@Payzme13 3 жыл бұрын

😆😍😄😁😆😚♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️💚😹👥👤👥👥💦💫💋🤦🌹🌈🐞

@poldalp 7 жыл бұрын

I swear to god, u are genius, keep up the good work!! (y) :)

@chrisfix 7 жыл бұрын

Thanks!

@firechiefsampolitano1541 7 жыл бұрын

Poldalp, common sense goes a long way if you have any. But considering most American males have lost that connection from learning things from their fathers.. Chris is closer to being a genius, compared to young men of the up and coming generations. Thanks for the video, Chris. Someone need to teach people basic auto care. I doubt if my kids know how to change their oil or replace a blown out tire. Not because I haven't taught them, because their cheating mother wouldn't allow it and said her PW husband could teach them... yeah that really worked.

@therealb888 7 жыл бұрын

Sam Politano lol 😂, that sure got personal!

@TheOddest1 5 жыл бұрын

I smell a r/wooooooosh here somewhere

@josephtempleton4930 4 жыл бұрын

@ChrisFix great vid. Any chance you'll be doing a dual battery setup on that Mazda, for running all that auxiliary lighting? I'd like to go that way on my F-150 and I know your step-by-step approach will be the easiest to follow.

@3n3ly7m9 Жыл бұрын

Wow. Way to feel old, this was only from 2015............ 7 years already :( Your videos are timeless.

@jmasonrcingabout273 5 жыл бұрын

Bloody hell! you make everything look and sound so easy. When I even try anything like this like getting power to the sub in the back of my (Ehem, micra) it ends up being a herculean battle against bulkheads and stubborn interior panels (that change their shape after removal) resulting in bloody knuckles and foul language. You should teach courses in auto maintenance and modification. Keep up the top notch vids.

@olechuga2 7 жыл бұрын

Sir, for your three (3) videos in the construction of your truck's bedrails, headache rack and mounting system for your light-bar, paint job and electrical setup ... a most excellent set of informative videos. You did your major projects so simply constructed, explained so well as you were constructing them, overall paint job and electrical setup, that you made me feel I was there helping you all the way. You Sir, made it look so simple to construct this time-consuming project, yet produced such an "elegant" home-made job. Your construct ended rivaling a professional job, and yet you made it happen "your" way all-around. Your truck's lights, plus the light-bar's, makes for sone scary sunlight. You are no doubt scaring the bejesus out of all those crazy furry friends, wondering just what has happened to their world at night, and reaching for their "Kaopectate". I congratulate you Sir, for a job simply very well made, and thank you for your hard work, as published.

@robertlinva9503 6 жыл бұрын

Great job on this video, Chris! It was definitely the best video that I've seen showing every single step in this process. You also did a great job not only talking about how to do things, but you showed technique and the appropriate tools. Really great job.

@soidus 4 жыл бұрын

Watched this because I'm an electrical engineer and had so much fun, despite not being a truck owner!

@antoniadelgado8677 4 жыл бұрын

Reading this made me think of a Toyota prius with a strobe light that was taped on It made me laugh harder then I should have

@gaminggonzalez8830 3 жыл бұрын

@@antoniadelgado8677 9kkkkkkkko9kk9

@alexanderthompson1753 2 жыл бұрын

Chris, I absolutely LOVE watching your vids!! They're super informative, and you cover every detail of what you're doing and why you're doing it, which, in turn, answers ALL of the questions that come along the way. Thank you for taking the time to teach us!! Keep doing what you're doing, man.

@TuddecBMW 8 жыл бұрын

"That isn't a light, it's a collapsed sun!"

@ozgultekin6100 8 жыл бұрын

+Tuddec hahahahahahahahahah

@pancho1684 7 жыл бұрын

says Clarkson

@rinofagerlund2371 6 жыл бұрын

Top gear XD

@syedzaynuddin9639 5 жыл бұрын

Zayn

@syedzaynuddin9639 5 жыл бұрын

122222

@RealLifeOORA 9 жыл бұрын

I am happy I found this channel. Not only is your voice clear, and camera steady, but you do an amazing job at explaining EVERY step. Really good job doing these videos

@chrisfix 9 жыл бұрын

RealLifeOORA Thanks a lot bud! Comments like this mean a lot to me!

@myy_koneesi Жыл бұрын

Just realized that this video is 7 years old, i bought a light bar and reverse lights for my truck and i just followed the steps and it works perfectly. Thank you!

@chrisfix Жыл бұрын

Glad to hear! Thanks!

@FOREVERaPILOT 6 жыл бұрын

Hey Chris, I just started watching your videos last week and i'm HOOKED! You put so much detail and thought into every project it just inspires me to do so much more work for my truck when i get back to her. Also the video editing and sound quality is better than most for sure! I installed an LED bar on my grille guard, two minis on the headache rack for full coverage and a reverse light a couple years ago with a buddy who knew a little more than me on electrical wiring. (94' F-250 with a 7.5 460 FYI) IT WAS TERRIBLE lol, before i left last year only the front LED worked and I didn't secure the wires at all. Watching your videos is great because i love to do very detail and quality work so thank you for providing amazing detailed videos to help me through the process. I am excited for all your future videos and success in the future, Good luck and thank you.

@danielpindell1267 8 жыл бұрын

Really impressed with your work 👍👍👍

@user-fm8pt8mk9r 6 жыл бұрын

Excellent job I loved it

@gwolf7716 Жыл бұрын

Once again, the best explanations in the business😎. I’ve been tearing my hair out trying to wire up a pair of off road lights with two relays and an unneeded switch to factory aux switches and your method of diagraming and laying out the harness produced professional results. Thank you sincerely!

@abdulelkhatib2674 Жыл бұрын

Great job as always, and I always love watching these tutorials. I highly recommend installing a switch panel and relay box in your truck instead of individual switches. I did that for my truck, and I think it looks so much better than many loose switches.

@chrisfix Жыл бұрын

Thanks a lot

@paulgerard6675 9 жыл бұрын

I've watched since episode one! This was a great video! Lightbar came out great and as always the editing is awesome! A job well done!

@Trd2020 9 жыл бұрын

clean work, i wish your where my mechanic

@hawk5543 6 жыл бұрын

I love watching your videos! They inspire to work on my vehicle and give me confidence to tackle many different projects. Thanks Chris. Keep the videos coming. :)

@anthonyamos6828 2 жыл бұрын

Best tutorial I've seen so far. Your attention to detail is just what I was looking, and you make sure all steps are super clear. Thank you!

@wesselbakker936 3 жыл бұрын

You know it's a ChrisFix video when it helps you even though the video is almost 6 years old. Thank you, Chris! I now have some nice Hella comet 500's mounted to my front bumper. :)

@chrisfix 3 жыл бұрын

I'm glad the video helped you! I'm sure they look awesome!

@6RGyan 7 жыл бұрын

Quite an Illuminating 😇 project. Fine job.

@adrianarnold6499 4 жыл бұрын

Really excellent vid! Features the best explanation and demo of wiring lights on a vehicle that I've seen to-date! You take away all the doubt and fear of wiring projects. Simple and straight forward. Well Done!

@andrews9715 4 жыл бұрын

Thank you so much! this was a great very instructive video. I have looked at loads of wiring related vids and yours is the only one that meets my Virgo standards for detail and professionalism. Hubby and I are the proud parents of a new tractor and she needs better lighting so wiring up some auxiliary LED'S will be a priority. Thank again.... warmly, Gillian

@theend1555 9 жыл бұрын

Hey Chris! I found your channel only a little while ago and I already love your videos man. You're super detailed, speak clearly and plainly and your camera work is great. Keep up the good work!

@chrisfix 9 жыл бұрын

•Finn• Thanks a lot man! I really appreciate the feedback and I am glad you are enjoying the videos!

@camilorosales30 7 жыл бұрын

I've said it a million times bro. what an amazing video, you make everything sound so simple with all this work you're doing to the truck keep it until the wheels fall off people are so cheap nowadays you will never get the money you put into it awesome job.

@chrisfix 7 жыл бұрын

Thanks a lot!!!

@malcruzg 5 жыл бұрын

As usual, you're absolutely detailed, graphical and explained every step of the process. Please keep the great job, thousands are learning and being motivated by this stuff! (Y)

@user-ci7de7kp6u 6 жыл бұрын

Thanks for the detailed explanation. I really want to DIY a light bar to my car and still confuse after watching others tutorial, but your vlog makes it easy for me. Thanks. Really appreciate it. Now your channel has become one of my favorite channel.

@PedroMartinezinlaquesh 9 жыл бұрын

Finally! !! Yeah looks awesome chris, congratulations for the good job and your new lights, and as always thanks.

@chrisfix 9 жыл бұрын

Pedro Martinez Thanks a lot Pedro!

@dawiddawid6675 8 жыл бұрын

Wooow! I didn't expect it to be that bright! I really like the way you explain the wiring process. Keep it up!

@chrisfix 8 жыл бұрын

+Dawid Dawid Thanks!

@richarddannov5784 3 жыл бұрын

Youre the best! I just spent the last 2 nights losing sleep because every other video I watched on the subject they said “you’ll have to get power to the switch from SOMEWHERE in the cab”. No further explanation. But you, sir, you showed exactly how to het power from the fusebox. I cannot thank you enough!

@mysss29 2 жыл бұрын

Awesome video, thanks! Loved the demo at the end.

@spencerhutchison3667 5 жыл бұрын

When the video started I thought this would be a difficult task but you explained it so well I'm pretty sure I could do it myself! Thanks for the great video!

@chrisfix 5 жыл бұрын

Thanks

@ats6136 9 жыл бұрын

I love the look of the mount! Great video man.

@chrisfix 9 жыл бұрын

SharperAdam Thanks a lot!

@Becomingwildman 6 жыл бұрын

Wauw Chris that light is awesome. Thanks for sharing all these videos, I was always staying away of working on my own car but due to your videos I've done some work on my car. Thanks, keep sharing, greetings from belgium

@arblineltd 4 жыл бұрын

brilliant video mate, just ordered 4 for my works vans and this has simplified a massive task for myself, thanks a million brother.

@semdelijster4459 5 жыл бұрын

Woah that makes a huge difference!! Nice job on that

@swordsmanGFX 7 жыл бұрын

i cant believe it look that good ! nice work

@chrisfix 7 жыл бұрын

Thanks a lot!

@apolloplanb5209 4 жыл бұрын

Chris you represent old school east coast American ingenuity and integrity. Whether you're fabricating, fixing or restoring you never take shortcuts and do the job as it should be done! I also appreciate your attention to detail / OCD as it's definitely needed to complete all your videos to that level of completion. Too many lazy hater trolls on KZfaq.

@GarretSterling 6 жыл бұрын

great demo video, well made, with good instructions. how rare do I compliment demos...

@lotharvonrichthofen4474 7 жыл бұрын

Wow! It was worth the wait...amazing night vision with this set up...nice work

@chrisfix 7 жыл бұрын

Thanks a lot!

@OlympicGaming 8 жыл бұрын

well worth it, props on the project bro

@chrisfix 8 жыл бұрын

Thank you!

@iansearle8339 2 жыл бұрын

Helping a friend install a light bar this week, and even after watching a few others, I always end up using yours as the definitive guide! :)

@Mrbooboo1972 6 жыл бұрын

Subbed. I've watched alot of different videos and I have to say you do some of the very best Extremely Well Detailed Videos. Did I say Some of the best, I meant the Very Best. You really do A Great Job, Thanks man. Very much appreciated. Please keep at these.

@rolandoflores4948 Жыл бұрын

Im glad I came across this vid bro it’s gonna help me a lot plus save me some bucks I need to wire some light pods and light bars on my Polaris Ranger

@TowMan127 7 жыл бұрын

Makes me wanna do that to my truck

@hugo-cd4rh 6 жыл бұрын

TowMan127 ahh yes please

@yuridaman 6 жыл бұрын

Do it

@KILLAFORD41 6 жыл бұрын

TowMan127 same here

@leizhang5462 6 жыл бұрын

@vdoxsamp7283 5 жыл бұрын

JUST DO IT!

@BigBoyMemer 2 жыл бұрын

By far the easiest to follow light bar installation tutorial out there. ILY chris fix.

@josephtempleton4930 5 жыл бұрын

Masterfully done, my good man! Love your channel. Keep up the amazing work.

@Tcostello 8 жыл бұрын

you literally blew my mind putting that switch in the door.......

@chrisfix 8 жыл бұрын

Good idea right?

@MachitoLFC 6 жыл бұрын

Me too! Never seen that and can’t understand why, aside from being very different

@craigsters08 6 жыл бұрын

ChrisFix can u do a video on your Mazda smoke test vacuum check?

@ASPthespeedyboy 5 жыл бұрын

Toby Costello kaaboom

@CyanRogue759 5 жыл бұрын

Why not connect the fuse tape to the wire after you ran it through the door harness 🤔

@zebracherub 7 жыл бұрын

Now, put a sticker above the switch reading "ejecting seat". You know, when you give people a ride and stuff :p And now the hardest thing is going to resist using this bar on the road at night lol. It makes things so bright, you don't want to go back to normal beams :/

@YeetxBoi 7 жыл бұрын

just turn it off when passing people, or do one like i plan on doing into the front of the truck rather than on top(this keeps it from hitting in eyes.)

@benjaminmasters5375 7 жыл бұрын

i am so doing that now, im going to get an big red button and stick it to my console that says "seat ejector" or i could do "self destruct"

@zebracherub 7 жыл бұрын

Ejecto seato, cuz!

@bagawathytruckinginc 7 жыл бұрын

zebracherub hahahahaha

@mikushionhatsune4261 7 жыл бұрын

yeaaa bud channeling that inner james bond status i see XD

@ahmedonal-dahbali8770 2 жыл бұрын

Really really amazing videos.,the way you lay out the tools you're going to use and explaining each step slowly, the camera work and lighting in dark places under the car simply put you are the best KZfaqr I really appreciate your work and you inspired me to learn more about cars as a young man from Yemen Thank you very much

@nsbyband5239 6 жыл бұрын

Thanks so much i was looking around so much videos about car wiring and I'm saying to my self why don't cris fix have a video on that until I searched again and found this video u made my life so much easier no other KZfaq videos come close to yours

@Aron-ru5zk 5 жыл бұрын

I’ve wired mine with a relay into my high beams with a switch in my dash wired into the light bar circuit so I can use my high beams regularly for on road driving and then with the switch on the light bar comes on with the highs

@deaddad6310 3 жыл бұрын

That's pretty big brain chief. I'm stealing it lol

@sarcasm2k 5 жыл бұрын

Hey Chris. Your content is amazing. Your attention to detail in terms of content, filming and audio is amazing. Thanks for all the tips!

@sportcoach5365 6 жыл бұрын

This video really helps to anticipate light wiring and appreciate fantastic difference with complete project.

@hectorlopez1344 3 жыл бұрын

I’m glad your channel exists... it’s like my very own how to be crafty dude manual... thank you for sharing your knowledge

@forcefieldgaming3831 8 жыл бұрын

I think Chris burnt my eye with that damn welder.....

@ozgultekin6100 8 жыл бұрын

+Forcefield Gaming ikr..... :D I was wondering if that was bad to look right into or not lol

@mosesm.3431 3 жыл бұрын

@@ozgultekin6100 naw, your screen can only get so bright.

@benjaminkoll9179 5 жыл бұрын

You should do a cb install no one shows vids as detailed as you do

@kypercarjoe153 Жыл бұрын

so nice and clean. You helped make this simple and straight forward. Thanks bro. Rock on!

@ge1773 4 жыл бұрын

What an incredible teaching "how to" video. Step by step with great explanations. Excellent!

@AntrikshNashier 9 жыл бұрын

Chris bro u r seriously awsum U r tooo good at work and ur so damn technical plus inteligent and tricky U have all tricks and tips for best and all best and grt tools for alll... U r simply d best wwith funny conversation I seriously loved ur work and how u make video so damn goood... That we can all learn so easily I salute and respect u... Seriously

@MrKamilo73 8 жыл бұрын

Where you learn all this things about cars? :) and how much time it take? You're great teacher, your videos are very useful!

@joshuafitforbattle8999 4 жыл бұрын

You make great videos. So clear, concise and easy to follow. Thank you 🙏

@khalidramji8083 Жыл бұрын

Awesome detail. Never knew about the relay either so this really helped!

@davidsmalldridge870 5 жыл бұрын

The off-road light bar on the roof of my dream car needs to be wired! How to do this? (CLICK) Here goes nothing! (CLICK) Hey guys ChrisFix here!

@alexhidalgo9709 5 жыл бұрын

Hey Chris, any chance of doing a wiring tutorial on an audio system? Like subwoofers and amps

@GmanGggggg 6 жыл бұрын

Very informative, thank you Chris Fix!

@mainxample 6 жыл бұрын

I was soo excited watching this. Love the videos

@salvadorchh6466 7 жыл бұрын

how can you make everything so perfect!

@chrisfix 7 жыл бұрын

Take your time and plan it out!

@austinsullivan7891 9 жыл бұрын

8 people are mad they have no vehicle.

@alluserbd9359 7 жыл бұрын

এক্স

@yuriportes2606 7 жыл бұрын

How can someone give the thumbs down on this?!

@antijake4122 7 жыл бұрын

austin sullivan ,olyitututyrttttttt

@bekiro28 7 жыл бұрын

plain simple assholeeesss

@nazGONZ79 7 жыл бұрын

austin sullivan stfu

@WhoKnws Жыл бұрын

I’ve been watching his videos for at least 8 years always professional and easy to follow his instructions..and I can’t wait to get a light bar on my grand marquis

@caidencoleman9503 4 ай бұрын

I'm in college for auto (specifically electrical this quarter), and this video helped me nail which pins on the relays do what. Chris is absolutely goated. 💯

@ItsIdaho 5 жыл бұрын

Officer: *"I wonder what's this red button do?"* *Dumb ways to die...*

@DeadlyVoltsHD 9 жыл бұрын

Project police interceptor part 3 man!!

@chrisfix 9 жыл бұрын

DeadlyVoltsHD That is soon! I am getting the car back! WOOOOOOOOO

@Sandcastle_king 9 жыл бұрын

ChrisFix oohhhhh thank god!!!! I'm getting too antsy lol

@DeadlyVoltsHD 9 жыл бұрын

i have a 2002 crown vic myself lol love it its an actual ex police interceptor with police package everything but its got a civilian interior swap

@joeholmberg250 5 жыл бұрын

Awesome install! Great detail

@gwlane5509 5 жыл бұрын

Its 2018 and I’m going to use this method for my subie light bar! Thanks Chris...top notch channel!

@Recovering_Californian 9 жыл бұрын

Instead of zip ties use a few cushion clamps. They'll last longer. Looks cleaner too.

@immortal_morty1347 7 жыл бұрын

id buy a busted car just to fix it the chris fix way

@nathanh.809 4 жыл бұрын

Just recently acquired my dream “truck”. 1994 ford ranger XL Splash, and your truck DIY videos have given me a new passion. I hope to be able to show you how cherry she will look with a light kit on it like this! Thank you!

@chrisfix 4 жыл бұрын

That's awesome! Let me know how it goes!

@Mannievh 3 жыл бұрын

Thank you chris for the work you put into making these videos. I know it takes a lot of time. I’m going to attempt this installation now that I have they know how from you.

@KeystoneProdsPA 3 жыл бұрын

Hey Chris, when you wired the additional 3 switches, are you going to jump them into the same fuse box slot 17, or does each switch need it's own fuse slot?

@JoshRJameson 3 жыл бұрын

Also do they get their own relay

@ubreakitirepairit3569 3 жыл бұрын

It's better to use a different slot. The slot he is using provides 12V even when the vehicle is off, but you may want to use a different slot for something that doesn't need 12V when the vehicle is off or even more, requires a fuse of a different rating.

@Nick6Michael 8 жыл бұрын

Was I the only one smiling throughout the video at the end?

@chrisfix 8 жыл бұрын

+Nick6Michael Haha, that is awesome and no you werent! I was smiling too! It was awesome!

@ericstodgel2621 8 жыл бұрын

+ChrisFix Awesome job very good video

@mr_jake.y8348 5 жыл бұрын

Man I can watch you all day. Good work keep it up.

@IceMistBabe 10 ай бұрын

Love your videos 😁, I've learned so much and I also use them as background noise when I do other things in my house because your voice is kinda chill and soothing 😁