How to Install Auxbeam Lights (Mounting and Wiring)

Рет қаралды 33,882

Жыл бұрын

Did our video help you? If so, consider buying us a beer: bit.ly/3feE6tJ
In this video, we show you how to mount and wire Auxbeam lights onto your vehicle. The vehicles we installed the lights onto are 3rd Generation Toyota 4runners, but the techniques and tips shared in this video would help you install Auxbeam lights on any vehicle.
Link to OEM fog light switch diagram
docs.google.com/document/d/1z...
If you want to swap out the generic rocker switch to an OEM fog light switch, email us at
HMB4RNR@gmail.com
Link to fog light switch pin out and connections to relay
forum.ih8mud.com/threads/can-...
Link to relabeling OEM Toyota switch
forum.ih8mud.com/threads/how-...
*AUXBEAM LIGHTS*
*22" 5D-Pro Series 2200LM Spot Beam Off-Road LED Light Bar auxbeam.com/TTM4 15% OFF Code: TTM4
*7" 230W 33332LM 360-Pro Series Off-Road LED Lights (2 Piece Set - 115W Each) auxbeam.com/TTM5 15% OFF Code: TTM5
*5" 110W White/Amber Off-Road LED Light Pods (2 Piece Set - 55W Each) auxbeam.com/TTM3 15%OFF CODE: TTM3
*3" 80W 9600LM LED White/Amber Light Pods (2 Piece Set - 40W Each) auxbeam.com/TTM2 15%OFF CODE: TTM2
*To see the other products Auxbeam sells, visit their website: auxbeam.com/
*OTHER PARTS*
*Lamphus Off-Road Light Bar Mounts (2 Mounts per pack) amzn.to/3Be6fbM
*KC Universal Wire Hider amzn.to/3HceJEb
*Waterproof Electrical Connectors amzn.to/3VZOZiJ
*11 Roll Wire Pack (Multiple Colors) amzn.to/3iwCzjI
*Split Wire Loom Set (1/4", 3/8", 1/2") (To protect the wires - Good general kit for most wiring projects) amzn.to/3AOtgBb
*1/4" Split Wire Loom (50') (You'll need this kit if you're running wires to many roof rack lights like Timmy did) amzn.to/3UxyNE5
*Shrink Tubing Kit - (to have a weather proof and nicer finished look to the cables you create) amzn.to/3gIcWY8
*Heat Shrink Terminal Connectors amzn.to/2VmMVXU
*Heat Shrink Butt Connectors amzn.to/3gSpxbH
*Security Hardware (This is just an example of the type of fasteners you can buy to deter the theft of your lights. You would need to figure out the thread size and pitch of the fasteners for the lights so you get the correct security fasteners for your application) amzn.to/3h7ZQs8
*HELPFUL TOOLS*
If you're looking for other tools not used in this video, check out Timmy's Master Tool List.
www.amazon.com/shop/timmythet...
*Flex Head Box End Wrench Set amzn.to/31x8BOo
*T-Handle Allen Wrench Set (Metric) amzn.to/3BaMaTL
*Long Magnetic Parts/Tool Tray (Good for holding longer tools like ratchets and wrenches) amzn.to/2m89y0D
*Medium Size Magnetic Parts/Tool Tray (Good Size for keeping track of fasteners/small parts) amzn.to/2ky8Qt8
*Small Size Magnetic Parts/Tool Tray Set (Good for holding lug nuts or smaller fasteners/parts) amzn.to/3l5KnHg
*Wire Cutters - (used to cut the wires to size for this job) amzn.to/3wXoj7l
*Interchangeable Ratcheting Terminal Crimper Set - ( A very nice crimping tool for electrical work) amzn.to/2WNq5or
*Wire Strippers/Cutters 8-22 AWG Wire - (Very nice wire strippers. A definite step up from your usual wire strippers most people have in their tool box) amzn.to/2GrRAOU
*Heat Gun - (to shrink heat shrink tubing and shrinkable terminal ends) amzn.to/2DhDf47
*Crescent Wiss Tool Shears - (Used to cut KC Wire Hider to appropriate length) amzn.to/3urOGl6
*Milwaukee Cordless Drill (Used to drill hole in drip edge) amzn.to/3MVttYe
*Milwaukee M12 Battery amzn.to/3FJZO1j
*Milwaukee M12 High Capacity Battery amzn.to/2HEFTpu
*Milwaukee M12 Battery Charger amzn.to/2uo2o9x
*Drill Bit Set amzn.to/2pSfywn
**As Ebay Partner Network members, we earn commissions from qualifying purchases.
**As Amazon Associates, we earn from qualifying purchases.

Пікірлер: 88

@Auxbeam Жыл бұрын

We take almost an hour to watch the whole video and gotta say it feels like having a very informative mechanic lesson. No wonder why ppl love watching you guys video! And also love the way how you guys install the lights, espcially creating a flexible angle for the pod lights on top. It's gald to know that everything fit so perfectly in you guys hand!

@TimmyTheToolman Жыл бұрын

Thanks for the nice compliment of our work. We love our Auxbeam Lighting Systems and we know they will serve us well.

@christophergoodwin6846 Жыл бұрын

Just got the 8 spot switch panel because of your last video, couldn’t be happier. Was able to cut out about 5lbs of wiring lol. Thank you for the informative videos!

@TimmyTheToolman Жыл бұрын

Good to hear Chris. The Auxbeam switch panels really do simplify the wiring and the lights seem to work very well for a very affordable price point. Thanks for the comment.

@NOScopeHeadshotsOnly 8 ай бұрын

Thank you for taking the time to show them from a drivers perspective in the real world. With all the different lights out there and the different specs of spot/flood combos, etc, it's hard to know what's going to be the right one for your needs. Personally, I don't care how well they work pointed at a wall Show me the road an trail from the driver's seat, show me how well they light up that ditch and show me how well the floods are gonna light up a work area or camp site. You guys delivered, thank you for that.

@TimmyTheToolman 8 ай бұрын

You're very welcome. We appreciate your comment and you'r willingness to take a little time to comment. Happy Wrenching!

@andrewr05 Жыл бұрын

Awesome! I chose Auxbeam for my taillight, fog light and headlights recently, no regrets. 👍👍👍

@TimmyTheToolman Жыл бұрын

Thanks for the comment Andrew. Great to hear you like your Auxbeam lights.

@DuanDao Жыл бұрын

Love these videos. You breakdown all the components and how they work. And I love that these are affordable alternative

@TimmyTheToolman Жыл бұрын

Thanks! We're happy to hear you approve of these videos. Yep, they're affordable and they work well.

@stevenisacoolname2 Жыл бұрын

Stoked I just got my new AuxBeams in the mail today!!!! 💪

@TimmyTheToolman Жыл бұрын

Cool! Have fun installing them.

@davidadams6180 Жыл бұрын

😊 Excellent explanation of how to do these lights and put them on thank you very much!

@TimmyTheToolman Жыл бұрын

Thanks David and you'e very welcome.

@jasonrotairo Жыл бұрын

Exactly the video I needed to see. I’m hooking up lights, fuse box, relays to a 6 switch rocker panel. I still need to do more homework.

@TimmyTheToolman Жыл бұрын

Good luck with it.

@tobyhawkins8855 Жыл бұрын

@@TimmyTheToolman 2

@skoorbevad Жыл бұрын

Great video as always!

@TimmyTheToolman Жыл бұрын

Thanks! We're glad you like it.

@eljefeslash Жыл бұрын

Wow, those look awesome!! Thanks for sharing another great video. I'm glad you mentioned the multi-mode dilemma. That's exactly what I've been looking at b/c I'm not ready to run lights all over my rig yet, just wanted something I could mount on the A-pillar that might help in fog (amber mode) and on trails (brighter, white mode) and just be able to switch back and forth. This wiring/electrical business is definitely not my cup of tea, and I just assumed I could easily run the clicker through the firewall (or use an OEM version like Sean mentioned). I may need to re-think this and get single mode lights. Thanks!!

@UpNorthOutWest Жыл бұрын

if youre using ambers up front to help with fog you want them mounted as low as possible. not on the A pillars

@TimmyTheToolman Жыл бұрын

Yeah, we're stoked on the lights. Glad you like the video. The multi-mode function could possibly be powered via another switch spot on the switch panel. You would run the yellow wire to one switch to control the mode function and the black and red to another switch to power the lights. I didn't want to go that route taking up two switch spots for one set of lights.

@christophergoodwin6846 Жыл бұрын

One thing I want to add about the multi mode light dilemma is you can still use them with the panel you just have to decide which mode you want them to be in permanently. If you want it in the 3 wire mode you just splice the yellow/red wire together and if you just want it in the 2 wire mode you just use the red wire. You can’t choose between the functions (unless you take up 2 spots on your switch panel in which case you’d run the yellow to one switch spot and the red/black to another switch spot).

@TimmyTheToolman Жыл бұрын

Thanks for sharing that Chris. Sean and I talked about the possibility of using a switch spot to operate the light mode function but I didn't like that option. The singular function lights seemed like the logical choice knowing the limitations of the switch panels with multi-mode lights. I want to save my remaining switch spots in case I need them for more lighting like rock lights or for some other function that I want to power up.

@bramdavid277 8 ай бұрын

What is the three wire mode?

@christophergoodwin6846 8 ай бұрын

@@bramdavid277 essentially if your light has 3 wires it has 2 lighting options, 3 wire mode would be both lighting options turned on.

@kenny7479 7 ай бұрын

@@christophergoodwin6846 Hi, so ive got the 6 mode lights. The switch thats on the wiring harness has a red, black, yellow and white wire. The switch has a on/off toggle button and the button that runs through the modes. Modes being, white, amber, white and amber, strobing amber, strobing white, and the white strobe and yellow strobe back and forth. So how would that wire up? Id think red and black to one button on the panel for on/off, but for the other button place, how would that go about? Yellow and white in one?

@christophergoodwin6846 7 ай бұрын

⁠@@kenny7479hmm yea that’s a bit more complicated. Honestly sometimes I just try things until it works haha. But yea what you’re saying sounds very plausible hooking up 1 set of wires for on/off and another set for modes. Try it and report back.

@rolandoleybag8577 3 ай бұрын

Thank you so much for the video. It helps me and educate me as well.. thanks a lot very clear & specific method .👍👍👍👍👋👋👋👋❤️❤️❤️❤️

@TimmyTheToolman 3 ай бұрын

You're welcome.

@MarkamisPrime Жыл бұрын

I’ve had multi mode lights for over a year and haven’t installed them because I couldn’t find a clean way of running the wiring. That kc wire hider is pretty slick. Ima have to use that and a factory switch like Sean did. Another great video from Timmy the tool & Shawny the Sean man, men 🤷🏽‍♂️😂😂. English is my second language

@TimmyTheToolman Жыл бұрын

Yeah, that KC wire hider was a good way to go. Anwar told me about it. I didn't want to run all the wire through the firewall and then up through the roof. Glad you like the video Mark.

@iridesseaction 4 ай бұрын

@@TimmyTheToolman for the multi-light ditch lights, why could you not run wiring to two switches on the auxbeam? Ex: White mode is switch 1, amber mode is switch 2. Is there no way to do that? I would assume you'd have to be careful not to turn both those switches on at the same time?

@TimmyTheToolman 4 ай бұрын

@iridesseaction Didn't think of it, and there's only so many switches for the lights. If every light required 2 switches, I wouldn't be able to power all my lights.

@iridesseaction 4 ай бұрын

@@TimmyTheToolmanyeah my needs will allow for two switches. Just curious if accidentally having both colors on will cause some kind of burnout or overload risk.

@kdmtmb7657 Жыл бұрын

Great tip using wrench to open split loom. Check out Deutsch connects, bit pricey but allows 2 wires in and 2 or 4 wires out. Also they have a bracket that clips on and you can bolt to the rack.

@TimmyTheToolman Жыл бұрын

Thanks for the suggestion on those connectors. I'll take a look at them.

@extremeheat9113 Жыл бұрын

I know the connectors you are talking about but how do you get the 2 wires in 4 wire out

@lonesomecricket7721 Жыл бұрын

Excellent 👍🏻

@TimmyTheToolman Жыл бұрын

Thank you 👍

@LiquidXiron 8 ай бұрын

This video is awesome, thanks

@TimmyTheToolman 8 ай бұрын

We appreciate the comment! Let us know how your install goes 💪🏼 - Sean

@LiquidXiron 7 ай бұрын

@@TimmyTheToolman I already had the Auxbeam panel installed, but needed to see how to route the light bar cables from the roof to the panel. I used your video and another one as reference. So I used the KC wire hider and looks great. Thanks for the great video.

@TimmyTheToolman 7 ай бұрын

@LiquidXiron You're welcome. Good job with the wiring.

@jj2956 Жыл бұрын

Hey Timmy&Sean, do you guys have a video that shows how to wire into the existing blank panels (left of steering wheel)? I want to install some rocker switches to the blank panels I currently have. Thanks

@TimmyTheToolman Жыл бұрын

Sorry JJ, we don't have a video covering that.

@Knuckledragnation 2 ай бұрын

I appreciate the video and understand that this is for lights that basically turn off and on but what about aux lights that have the DRL/background mode as well? I tend to overthink & complicate things sometimes more than what is needed so again I appreciate your video but is there a simple answer to adding the DRL/background wire to the relay and I’m guessing a 3-way switch? ✌🏽

@TimmyTheToolman 2 ай бұрын

I don't understand your concern. The only lights that guys usually want on during the day are amber chase lights in the rear for dusty conditions.

@Knuckledragnation 2 ай бұрын

@@TimmyTheToolman I believe the lights I bought have a main LED light that turns on/off and while the main light is off I also have an option to turn on a outer ring backlight option similar to Baja Designs LP9 Pro LED Auxiliary Light Pod with back light option. Again I’m not very knowledgeable about lights so thanks.

@TimmyTheToolman 2 ай бұрын

@@Knuckledragnation Ok, I understand. In that case, you would probably want to use the stock wiring and switch to be able to switch between the different modes. If you wanted to use a switch panel like the ones we installed, you'd have to separate the wiring and have two different switches to power the different functions. But, you would quickly run out of switch spots on your fuse panel if you have a lot of lights. I think more expensive switch panels have the ability to operate multiple modes from one switch. The Auxbeam panels we used are a simple singular function on/off switch.

@Knuckledragnation 2 ай бұрын

@@TimmyTheToolman ah got it. Thanks! ✌🏽

@judiceat-large7716 Жыл бұрын

Would you recommend adding the rear light set up without a aftermarket roof rack?

@TimmyTheToolman Жыл бұрын

Without an aftermarket rack, you would probably have issues with finding an appropriate mounting location.

@extremeheat9113 Жыл бұрын

you should be able to run the yellow wire to a different button on the Multi switch

@TimmyTheToolman Жыл бұрын

Yes, you could do that, but if you have many multi-mode lights, like I originally got, I would have ran out of switches.

@mujtaballa3105 Жыл бұрын

I have a crazy idea in my mind. All the ideas I’ve had started out this way and I always follow through. Anyway, you know my turn signals on my truck are currently used as DRL. Ambers. Here’s my idea- I ordered new pair of turn signal housing. I’m gonna paint the inside black, heat them in the oven and pull apart the housing. Then I want to stick a diode dynamics ssc2 fog light pattern inside. Close the original turn signal housing. Here’s my question…. I want these yellow fogs to turn on all the time with my factory switch. You think the factory switch can handle it?

@TimmyTheToolman Жыл бұрын

It will depends how much power the fog lights draw. I can't give you an answer.

@mujtaballa3105 Жыл бұрын

The ssc2 diode dynamic pro draws 2 amp. Input power: 25.6 watts. And current draw 2 amp at 12.8V

@TimmyTheToolman Жыл бұрын

@@mujtaballa3105 I guess you just need to see what that circuit can handle based off the fuse that powers it to see if the additional draw of power can be handled.

@mujtaballa3105 Жыл бұрын

@@TimmyTheToolman thank you! I’ll Check the fuse and see what it says.

@cstaff4773 3 ай бұрын

So if I’m hooking 4 lights together I can link them together just like you did into one line?

@TimmyTheToolman 3 ай бұрын

Yep

@zachelliott9355 Ай бұрын

When the bikes is off is there no power to the switch cause I’ve seen guys tapping into some other wire but I’m thinking it’s for a 20 second delay or whatever ?

@TimmyTheToolman Ай бұрын

@zachelliott9355 If you powered the lights via a switch panel hooked up to auxiliary power, the lights will only power up when the key is turned to On, Auxiliary or the.vheicle is running. If you hooked up to a circuit with constant power, the lights would have power all the time.

@jimmywalker1775 8 ай бұрын

So you have had them on a while. Are they still working and has the lenses discolored yet?

@TimmyTheToolman 8 ай бұрын

They are still working fine. No discoloration in the lens.

@Randy_Savage_ohyeah 3 ай бұрын

If I’m installing one pair on my boat does the automotive relay have any purpose? Can I just run from battery to lights with the inline fuse and be fine?

@TimmyTheToolman 3 ай бұрын

Not really. The switch you’re using can’t handle the power coming through the wire so the purpose of the relay is to to keep the switch itself from overheating, potentially burning up the wires, and thus reducing the amount of electricity getting to your light. - Sean

@Randy_Savage_ohyeah 3 ай бұрын

@@TimmyTheToolman⁠does the switch connect to something or is it a stand alone piece?

@TimmyTheToolman 3 ай бұрын

@@Randy_Savage_ohyeah The lights come with the wiring that has a switch and a relay. So, just connect the negative and positive leads to your batter, and find a place to mount the relay and switch. If you need to extend the wires, then cut and splice in the length sections you need. - Timmy

@wilsoneashoian5789 10 ай бұрын

Timmy, which Auxbeam fog/driving lights are street legal (or any other brands). If you know, can you post the link to Amazon? Thanks

@TimmyTheToolman 10 ай бұрын

I don't know which brand Auxbeam or other manufacturer lights are street legal. All the lights I put on my rig are for off-road use only. I do know a common way to go for additional legal lighting is buying projector retrofit headlights or you make them yourself. Check out this video we did installing TEQ Customs projector retrofit headlights on our rigs: kzfaq.info/get/bejne/gpl8gq5-3Zi7h3k.htmlsi=kGOFbUgYkq0Np1eW

@wilsoneashoian5789 10 ай бұрын

@TimmyTheToolman Street is legal lights must be Dot/Sae J583 compliance There's Rigid brand, but it is pricey.

@TimmyTheToolman 10 ай бұрын

@@wilsoneashoian5789 Yeah, Rigid is very pricey.

@jdmDC2ftw Жыл бұрын

Next is neon lights in the wheel-well?

@TimmyTheToolman Жыл бұрын

Yeah, I know a lot of guys install the neon rock lights. I've seen guys use these to light up the area around their rig at a campsite when they're setting up camp. I might add rock lights at some point but not any time soon. I'm tired of running wires.

@jamesjackson4224 10 ай бұрын

And putting a cummins in a Toyota to carry the weight of all of those lights.