The case is nightmare to wire but aesthetics and temps are worth it for 4090 users.
@thoriig38872 ай бұрын
Interesting Ideas combined. Video und presentation quality is top notch, as usseal ❤🔥
@ChristopherFlannigan2 ай бұрын
Thank you 🙌
@shilling6313 күн бұрын
Great review, persuaded me to hit the buy button, be interesting to see how the 13900ks and Aseock 7900xtx on with it!
@MikeBob20232 ай бұрын
I like it! (And that's saying a lot considering how curmudgeonly I can be when it comes to change. 😝) I also like the fact that you're using Montech's HyperFlow AIO (I *must* have one of those to use in my King 95 Pro!), and I can hardly wait to finish here so I can watch the full build video. 👍🏼
@ChristopherFlannigan2 ай бұрын
AIO looks good. Montech are making some great products
@exoticspeedefy79162 ай бұрын
The whole point is better GPU induction and cooling which makes sense. When the GPU takes in air it blow it out the side, often then keeping the hot air inside the case. Having it mounted at the front gives the GPU better intake of air while expending out the mesh in the side of the case instead of over the motherboard and components, keeping the system cooler. What I would have liked to have seen, are two fans on the bottom drawing air up (instead of mirror) and fans (or 240mm AIO) mounted on top for exhaust, and mesh on both sides of the GPU as to expel its hot air directly out both sides.
@andrew_swanson2 ай бұрын
I was very heavily considering this when it was shown at last year's computex, as I loved the look of the upright gpu and the small footprint. But then the targeted release window (Q4 of 23) came and went, and I got impatient waiting as I'd managed to cobble together enough cash for all my parts in the interim, so I ended up buying an O11D Evo like everybody else, then immediately regretted not getting the Evo XL or waiting for this or the Vision. Having given it a few months tho, I'm glad I didn't bother. Case still looks great, but I think my tastes have moved on. Thanks for the review!
@ChristopherFlannigan2 ай бұрын
Your Welcome
@mactep12 ай бұрын
I cant help but think that it would make so much more sense for the side to be an intake, since it would be trivial to put a filter there, and have the back as exhaust.
@bobvila43812 ай бұрын
Nope... It's got the best temps you can get for 4090 users.
@KaVaKaZi14 күн бұрын
no its not.
@RaizuYT-vb5svАй бұрын
I wonder how many RTX cards are gonna have issues on the power connector because of how close it is to the tempered glass...
@yesterdaysjam24052 ай бұрын
I'd consider it if it were full mesh, or if they released a mesh panel for the TG side.
@xOgichiАй бұрын
@ChristopherFlannigan Assuming I want to run dual GPU for LLM, is the riser cable long enough to allow a 2nd gpu to sit in the 2nd PCIE slot and still route to the back to reach the main GPU? Looking at something like a ASUS TUF 3060TI (301mm length) as the 2nd GPU.
@dimwillow71132 ай бұрын
checked your other review with same hardware, wizmax case .. this case kinda smashes that case in both cpu and gpu temps.. quite interesting..
@ChristopherFlannigan2 ай бұрын
Motherboards push the CPU differently and I used a different cooler, but I was impressed with this case
@simoeqr11132 ай бұрын
This setup uses six exhaust fans and three GPU fans configured as intake, though the GPU fans do not spin all the time. Consequently, the only consistent intake fan is the rear fan, which lacks a dust filter. This configuration will create negative pressure, causing the PC to function like a vacuum, drawing air-and consequently dust-through every opening in the case. This design choice seems questionable, as it will likely result in significant dust accumulation inside the PC.
@bobvila43812 ай бұрын
They have dust filters that aren't even needed so nope.
@englishdave86352 ай бұрын
Every GPU I’ve had the last 5 to 6 years including the 4090 I have have the fan settings to run all the time and then increase the temperature as far as I know the Aio should be an intake and the exhaust of the three set fans in the middle
@haukionkannelАй бұрын
Should prevent sagging of really heavy gpus… I would hope to see a little bit bigger version that would allow full air cooled version of this, instead water cooling…
@izik72202 ай бұрын
The riser cable looks attrocious just being there
@ChristopherFlannigan2 ай бұрын
I'm sure they will take care of it in V2
@englishdave86352 ай бұрын
I was lead to believe that the Aio would be an intake not an exhaust
@margovincent22xАй бұрын
Can we install two 360 AIO rad for CPU and GPU at the side panel?
@haies092 ай бұрын
How many HDMI/DP cables can fit through the grommet? Some have three or more monitors and from the looks of it, doesn’t look like too big.
@Blafard6662 ай бұрын
Maybe this will help people to finally stop putting their PC on the ground ...👍
@ChristopherFlannigan2 ай бұрын
They will still find an excuse
@Hydra_X9K_Music8 күн бұрын
I can't help it man that's the only open space for it I got:(
@Hydra_X9K_Music7 күн бұрын
@@Blafard666 I made space! It's not on the floor anymore!
@Blafard6667 күн бұрын
@@Hydra_X9K_Music Proud of you, friend 👍
@yellowking2262 ай бұрын
Riser cable triggers me if they could sort that out id consider it
@velocitymgАй бұрын
Why can’t they make a riser with a single round cable instead of the flat ribbons..is it a technical issue ?
@CarnivoryHODL2 ай бұрын
How would you compare to o11 air mini?
@raisedbyaspaceinvader2 ай бұрын
Not keen on the idea you just have to pass a hdmi/thunderbolt cable through the back of it through a hole?
@bobvila43812 ай бұрын
Yes if your cables are short you will need to by longer cables... plugging them isnt an issue just length.
@ivica70922 ай бұрын
Chris am I going to fry cpu if it sits next to wall radiator side?
@bobvila43812 ай бұрын
No it just needs a few inches for exhaust and its fine...
@ivica70922 ай бұрын
@@bobvila4381 and then recirculate hot air
@bobvila43812 ай бұрын
@@ivica7092 Well mine is 6 inches from the wall and temps are great is all I can tell ya.
@ivica70922 ай бұрын
@@bobvila4381 thanks for info! But I would like to see some reviewer do some testing with that in mind. I mean for me suddenly that smaller footprint doesn’t make sense if you need to move it from the wall 6 inches . You do some rendering or just gaming?
@MartinParkes2 ай бұрын
Yet another liam li monster. Keeo it lol
@damokerbs58562 ай бұрын
I don't get the point in Lian Li giving you that mirror with the case? That should be optional as it probably won't suit 90% of users. They could give you something else instead!
@bobvila43812 ай бұрын
I cant even see the mirror on mine from where I sit.
@lyan012 ай бұрын
My name ? 😂
@rockchalkv2 ай бұрын
Not my cup of tea.
@ChristopherFlannigan2 ай бұрын
Not mine either, but thermals make sense and good to have something new
@Intruder742 ай бұрын
This has got to be the dumbest case i have ever seen. 0 airflow over ANY critical components inside the case.
@bobvila43812 ай бұрын
You are wrong... its got the best temps of any case I have ever tried. Even the back of the motherboard is actively cooled and temps reflect that. The downside to the case is having to wire it. MB temps were a lot higher in my 011 dynamic due to the 4090 exhaust cooking everything.
@Intruder742 ай бұрын
@@bobvila4381 Put this case against Fractal's Torrent and come back to me
@AtomaJava2 ай бұрын
@@bobvila4381how the noise levels? Thats my main concern when buying a case.
@germanmade1219Ай бұрын
Just say you don't understand how airflow works.
@englishdave86352 ай бұрын
I was lead to believe that the Aio would be an intake not an exhaust