So here we go with the flex plate install. These same principle will apply if you are installing a flywheel. There is one section of the video where for some reason my camera shifted focus and so the picture isn't super sharp. Sorry about that! But it will clear up about half way through. This project is coming to a close, so I hope you all have enjoyed them and are ready for the next series!
Here's our Affiliate Link to the SFI rated, Heavy Duty flex plate that we used in this build. We used this seller cause he had a good, solid price and offer free shipping and returns. Hard to beat that for around $90 bucks. Some guys have even used this on 1000hp builds. not bad, not bad at all!:
rover.ebay.com/rover/1/711-53...
Here is an Affiliate Link to a Extra Heavy Duty SFI flexplate that I picked up to run in one of my upcoming builds. Same basic design as the flexplate above, but without some of the extra weak points. Even though it is around $160 bucks, it is still half of a "billet" flexplate. We will be doing a review of the one we bought here on the channel soon!
rover.ebay.com/rover/1/711-53...
Here is a link to the Barring tool we used to keep the motor from turning while torquing the flex plate bolts:
rover.ebay.com/rover/1/711-53...
For any of you all that might be wondering, these are affiliate links and we make a little bit off any of these items you purchase. It doesn't cost you anything extra, but it helps us keep up the work here. So instead of shying away, please consider using our links to help our the channel!