No problem and it is a great thing to be hooked on. thanks for watching.

Thanks again and will do.

@@chud327 hey man quick question how many cc is the engine and how many Hp and is it chain driven or belt ?thanks,love the BUILD

@@alexmichel2937 belt drive, 14.5 Briggs

We will rebuild it... bigger, better, stronger, faster than ever before. (Million Dollar Man theme playing)

Yes and thanks for watching.

Nice and thanks for watching.

Yep... they give us weapons to go fight with and we make em better...or try to at least!!!

Need to build a killdozer and drive it straight through Nancy Pelosi's house.

Bryan Keith best comment of the week award goes to you!!! Thanks so much for the comment and for watching.

Thanks so much and. thanks for watching.

It is fun especially the mud parts. Thanks for watching.

It may just happen, we will see. thanks for watching.

Thank you so much, I am loving it. Thanks for watching.

Thanks, I am about saving time and elbow grease. Thanks for watching.

I am keeping the singles on the front, let me know when you get a mower going. Thanks for watching.

@@chud327 I took pulleys off the more deck themselves, and they have a groove similar to the rear end pulley. I don’t know if they will fit yet. I haven’t tried. That would be awesome if they did.

Best comment of the day, I love it! Thanks for watching and especially for subbing!

Testing is the best part... Thanks so much and thanks for watching.

I know right, thanks for watching.

Mine only cost a $1 can of paint with the junk I already had. Thanks for watching and good luck.

chud327 yeah, but I don't think I have any 4 lug rims like that, so I'm going to have to go hunting and fine some.

Thank you so much, I love your comments too.

Good idea and thanks for watching.

Both very smart ideas. The first may be known from application of doubles on tractors, the second to my knowledge it totally original. A lot is probably to learn from the way doubles and triples are mounted on tractors? Both good ideas though👍 The use of 'spacers or adapter rims anyway is a major plus compared to tires that are mounted to one another without space. This allows the side of the tyre to move outward and gain contact with the ground. One disadvanteg of welding the adapter rim to the outside rim is that you can't use the outside rim for other purpose anymore, so this is even more flexible. Well done.

Very cool, would love to see yours playing in the Snow. Thanks for watching

Awesome and I love your comment. thanks so much for watching.

So glad you like it!! I have some car and a couple mower engine swap videos. I don't have many rebuild videos, I have rebuilt and engine in a long time. Maybe I can do some in the future and thanks so much for watching.

They are super cool, I may have to put them in the local Christmas parade. Thanks so much for watching.

Do you find that they help keep from tearing up the lawn and hills... I realize you're not using this tractor for that type of application, but the idea is great.

When I had dual turf tires at first, I could go through the muddy yard and leave no ruts... As for hills, I am in Florida, we don't know what hills are here. Thanks so much for the reply.

LOL :)

I do now work shift work, 15 12 hour days and 15 off. However, I never feel I have enough time. Thanks for the comment and thanks for watching.

I think it is a good idea, but the way, I have done it to my John Deere just recently. Check it out and let me know what you think. Thanks for watching.

You get it Steve! Love the comment and thanks for watching.

Wine and Cheese no voy a aguantar en South

so damn true

Glad to hear and thanks for watching.

Thanks and thanks for watching.

Thanks so much and sitting here editing another mower video. Thanks for watching!!

Thank you so much and thanks for watching.

Your welcome

Agreed and thanks for watching!!

Thank you so much and thanks for watching.

great tips, thanks for all you comments and replies!

Thanks so much!!!

Try it out and let me know, thanks for watching.

If I had 4 on the front, it probably would, thanks for watching.

Thanks, I am glad you like it, thanks for watching.

Maybe with a little more work... More upgrades should be coming out this weekend, I hope to hear from you again. Thanks for watching.

chud327 always looking forward for more awesome videos 😎👍

Thank you so much for watching! I am still debating with myself on a JD dually, I will let you know soon. If I do it, it will look just the same it only different.

That would be a problem, I find some areas were I can't fit my mower through, but all in all, it is a blast... Thanks for watching.

I wish a bunch of the viewers could come over for a mudding party, that would be sweet. Most live a billion miles a way by mower. Thanks for watching.

Nice, I would love to see it. Thanks for watching.

chud327 I uploaded a video this morning on my channel showing my duals if you still wanna see them. thanks again for the great vids.

I love it and I also loved the 4 shout outs!!!

That sound like wise advice, thanks for watching.

Neither machine could handle either mod he would need to convert to a peerless 700 with chain driven bar type axle or add a second transaxle to handle the torque required to turn the tires his current transaxle can't handle any more tires

kzfaq.info/get/bejne/ZrORpa5e0bKRcnU.html

That poor transaxle...

I should probably start taping now.

That seems to be what most of the experts recommended and happen to be what you gut said, so yeah, number 1 it is. Thanks for your expert advice and thanks for watching.

Go for it! I loved my duals, I really should put them back on one of the mowers, maybe John Deere... thanks for watching.

Thanks for the comment and thanks for watching.

Thanks and thanks for watching.

Thanks. They are 20X10X8's and I found mine on Craigslist or facebook. You can get them at tractor supply, but they are about $100 each. Mine were $33 each. thanks for watching. and good luck.

Thanks so much and that was one of my favorite videos so far. thanks for watching.

Yes and thanks for watching.

Yes and to make them look better. Thanks for watching.

Rollin' Coal welcome

Me too and thanks for watching.

You are 100% right and thanks so much for watching both.

“Imagineering”

Great advice, I may try to get to both soon! Thanks for watching.

RockeyDAproductions you should build a mud mower lol and /)

but i already built 1 and a half. i just have a problem with murdering trans axles. the cold central PA weather slows my repairs down.

RockeyDAproductions yeah same NY feels like it’s negative a million degrees the cold rain don’t help you have any pics of your mudder? Or you can’t send them on KZfaq?

RockeyDAproductions jsojfkr

Yes and thanks so much for watching.

I found mine on craigslist. You can google carlisle 20X10-8 and they will pop up. Good luck and thanks for watching.

I would guess yes on helping in the snow, but I am from Florida and no expert on snow. I know it would double you contact area which would have to help. The sand sound neat, but I have never tried it. Let me know how it goes if you do it and thanks for watching.

The Snow Blade would have to be widened to cover the rear wheels it would have to be wider when the blade is angled to the max rt and lt.

Those are Carlisle 20X10-8. Thanks for watching.

chud327 20x10-8 is exactly what i have on my tractor today. Thanks for your help. Now i just gotta find a retailer near me that sell Carlisle tires. I am from Norway BTW so i may not find any, but i will try 🙂

You are welcome and I sure hope you can find some, I love mine.

Me too, but it probably will not happen until next month at the earliest. Thanks for watching.

Thanks so much and thanks for watching.

I

Catch 22 I guess, thanks for watching.

Saturday, I picked up 5 mowers, video coming soon. Can't wait to see your deere, are you dualling it? Thanks for watching.

Yes how did you know lol? Dually Dually John Deere LT150 Mud Mower.

Just a great guess, I can't wait to see it. Thanks for the reply.

Thanks man! It is just the weak stock on, you can read down in the comments were other people have said what kind it is. I figure I will get a better one as soon as this one breaks. Thanks for watching. BTW, I like you channel name. We use to play trivia and our team name as the "Dumb masses"

Lol yeah i love doing plays on words, makes usernames easier to remember too.

I could have been more creative with mine, but that was a long time ago and now it is a part of me... Thanks for the reply.

Biggasmowers Irgbdtyo

That is a great way to put it and thanks for watching.

www.ebay.com/itm/NEW-Rubbermaid-Lawn-Tractor-Cart-Trailer-15-Cu-Ft-Capacity-/123033445989

I could go for that duals with deep cleats. thanks for watching.

Sounds like he got a deal then. thanks for watching.

Maybe and thanks for watching. let me know if you do it to your junk.

IKR and thanks for watching.

Happens every time and you are so right about being triggered... Thanks so much for watching.

It works but for how long????

Travis McAllister I can answer that. Duals do offer better traction and floatation, but has to be done right. The weight of the machine must first be ballasted properly, or you get less traction due to floatation. Tires also need inflated to match the new ballast load. If floatation is your only goal, add no ballast and decrease tire inflation. Axle mounted duals always can deliver the torque load better than rim mounted duals. But the most important thing to ever consider, is can your machine take the extra load that duals add? That’s the actual factual science of it. But in this case, he just wants to do it for fun and it’s his machine, so....no harm/no foul.. some manufacturers might even ok this depending on the application. Like mowing steep grades, loose soils, or anything that requires extra traction or floatation or stability. Some tractors that weren’t meant to be turbocharged in the Midwest were fitted with them in Colorado, because ambient air was thinner, so it required induction. Circumstances sometimes requires modification.

Black would be sweet, but I am trying to keep it looking kind stock. Maybe black next time. Thanks for watching.

Good suggestion, it currently has 20 tractor tires on front. Thanks for watching!!

No spacers worked, but the tires seemed to always wobble a bit. With the spacers, they don't wobble a bit. Thanks for watching and good luck.

I might just do it, thanks and thanks for watching.

chud327 Your welcome i enjoy watching your videos

So glad to hear it, thanks for watching.

chud327 Your welcome

Yes, I am figuring it is just a matter of time before I am looking for a new rearend... Thanks for watching.

I wish I had some snow here to dive off in, but I am in Florida... Thanks for watching.

I'll send you as much snow as you want, you pay shipping lol.

Might be cheaper for me to drive to the snow, maybe next winter. thanks for the offer and the reply.

If you ever want to come ride with us you're welcome to come up.

Tell again what state?

Thanks and thanks for watching.

There is a key but it is bigger that a cotter key. we will see how well it holds up. thanks for watching.

I don't know what you said, but thanks for watching.

I said a revelation. bravo you !!!

applause for you !!!

Thanks!!!!!! and thanks for watching.

Thanks and thanks for watching.

I wish I could test that four you, but I am in Florida. Snow is a super rare, maybe once in a life time here. I did do a sand vs. dual video recently. Check it out and let me know what you think. thanks for watching.

That would be cool and thanks for watching

It doesn't seem to slip unless you go deep in the water and the belt gets wet. It will slip good then. It has the stock clutch set up, maybe that will help save my rear from breaking. thanks for watching.

chud327 awesome vid

Amen to that!

So far so good, only one is leaking out grease... Thanks for watching.

Mindreader? I have just put two back wheels on the front of my mower. However, I didn't extend my spindles. I will let you see it, probably / hopefully Saturday morning. Thanks for watching and for the tip.

Me too and thanks for watching.

I've not decided yet, we will see... Thanks for voting and for watching.

I can remember, I bought two sets close together. I think these were $50 each and the dirt devils were $35 each off of craigslist. Thanks for the comment and thanks for watching.

For sure!

That would be so sweet. Thanks for all the comments, please feel free to leave more. Thanks for watching.