"Ideal to have 2 people , even 3. " kills it solo, Vinyl Bob Ross

I wish i lived by this guy, hes obviously the best at what he does. Much love for CKwraps from NJ.

You're not kidding about trying to keep your arm out from under the vinyl. My first attempt at wrapping the roof of my BRZ ended with several arm hairs underneath. 😳

You should make a Vinyl up keep or maintenance video.

I watch all the vids you post and I think you do one hell of a job by yourself wrapping those vehicles . I don't know why people would say it's not clean or find something wrong

very clean, your the BEST!!

Thanks man was planning on doing my hood and trunk after watching your videos I have a pretty good idea how to do it best videos on here on wrapping cars Thank you so much

You just are the best... Excellent job....

THESE ARE SO HELPFUL i have a 04 crossfire that im going to attempt to chrome wrap by myself as soon as i fix the paint with rattle cans so i have been watching alot of rattle can painting and wrapping -- im so greatful for all these videos i love my car but i got it kind of cheap because of problems -- one was paint -- wish me luck i just got done wet sanding my car in the rain -- it worked out pretty good -- thanks again pix

Great job ! Congrats amigo !

Again, amazing work. Wish I could work for you. An IR heater would be so helpful in these types of applications.

awesome job! great videos and good skills! Inspiring me to wrap my car with pride and precision. keep em coming!

It's spectacular to see you at work!

you make this very easy!!! I wish my van looked as good as this! same vinyl - not the same result!!! :-)

One take video wrap! Nice.

"want me to hold it" chuckles with that bihhh I'm a master no help needed smile:)

well done job ... really nice metod have to try it

Number 1 tool every wrapper in the world wants but can never have! A third arm. Oh what I would give for a third arm.

Perfect job

Oh! man how many likes do you deserve. Thanks for post your videos, the each day I learn with you. Great job bro. ✌️

Thanks for this video. I have trouble installing Flexishield film on a Tesla Model S trunk lid. This is my first car, so it has been a challenge.

I hope to some day very soon be that good excellent work man!!🍻

I want to see him wrap a trunk with a spoiler on it. I need more ideas.

Man all your videos of wrapping are awesome. I do have some questions for you. If u can answer me.

Good Job.

Looks good to me, its refreshing to see someone who cares enough to do a good job. Dumb question, can you paint over a wrap, like stripes or airbrushing.

素晴らしい　貼りです

the way it works is complicated...too much interesting.

Thank you sifu

31 people struggled to wrap christmas presents

Portas malas feito em 40 minutos isso foi sensacional,parabéns

It look easy when a pro at work, great job I hope I learn this too sometimes xd

Fuck this.... I'm not doing this my self, I will end smashing the car from frustration lol !

Love the vids! How long will the wrap last being wrapped this way? I'm sure this is your own car and you plan on re-wrapping it before it fails due to too much tension/overstretching? I see a lot of commercial wraps using mold and hold to make two pieces so they can provide a 3 year warranty, it looks tacky though imo.

why this guy so handsome lol wtf

Can you put the emblem back on over the vinyl wrap? Or should you cut around it for the tape on the back of the emblem?

your vids are inspiring to wrap my 2014 Genesis.

BEST PROFISSIONAL !!!

32:28 Right there is what we call "fingering', get your mind out of the gutter. Basically, the vinyl tenses up from all the stretching and heating over a corner and instead of pulling it straight down like you did, I would suggest the World Wrap Master's strategy of using triangles to your advantage. So, instead of pulling down, you pull once to the left, once to the right, and at this point left and right are glass and the middle has some wrinkles. Pull the middle vertically down so that it tucks the edge, and boom! You just tuck the corners in neatly without it having the chance to come off which is common when the vinyl becomes fingered. Also, anytime you don't have to use a heatgun and can do it cold-stretch, that's always a plus as the stretch and distortion will be virtually non-existent with the triangle method vs using a heat gun to try and get that little bit more of stretch. Really good video CK as always, but I thought I'd just share this tip as it makes a load of difference whether you're doing vinyl, xpel, ppv, etc.

Why do u use the back side of the blade to cut the excess vinyl?

Molto bravo!!! panico zero!!!....

How long does it take you to wrap a car ?? And can you please do a video about the different card you use for different wraps ?

HiI like to make an order a vinyl wrap from aliexpress you can advice me for a good vinyl wrap that i can order from aliexpress?Thanks

very very nicee

will the viynl stick to plasticote primer also can i use a hairdryer instead of a heatgun

My question is with all the heat and stretching doesn't that create adhesive line

this dude is skilled. I have trouble wrapping a desk lol.

Wrapping a trunk is hard as shit

Is it just my computer or do all of his videos get out of sync with audio/video?

Is that Vvivid Gunmetal Matte?

If a panel is keyed, will the keyed mark show through the wrap or will the wrap hide it ?

I have watched your video 10 times and when I wrapped the trunk on a genesis coupe with vivid carbon Fibre gloss I could not get it to go on without too much material bunching up so I had to do it in 2 pieces . Very frustrating I ca say

Hey, how much do you purposely cut and leave yourself when you wrap each panel? How many inches more would you have To give you enough room to work and stretch? For a Rookie newbie like me who just wants to do my own car and have fun with it. Also you should do some videos on joining wraps, and how you would stretch and apply two joints for a seamless look, so later when it shrinks a little it won't have the gap.

do u have to remove lights to do this ???

Intense.....

What vinyl is this exactly?

Bro u the best I just did my hood and it was small and simple and I caught hell it came out ok thanks to u i studied ur videos lol anyway keep up the good work

Bad ass

you should be called a "Takumi" 匠 of wrapping!

what wrap are you using??

when mentioning heat, what temperature is it?

I'm planning on wrapping my camaro but I don't know how much vinyl I need to wrap the whole car. How much do you recommend?

I want this color on my '14 Genesis Coupe

I have a Tacoma I want to attempt to wrap, but there is no body lines between the roof and quarters how do you determine where to join two pieces of vinyl?

ciao, il codice del prodotto applicato? grazie. ;)

So it just stays on with static? A damn nifty idea, i wonder who came up with it.

donde esta ese vinilo ?????

air bubble @40:50

I'm not being a dick dude but does putting the magnet down that hard ruin the vinyl like leave a sound magnet mark?

Have you wrapped a cts-v? Second gen?

first! niiice

What was that noise ? @ 27:57

5/5

This is a 3 man job. Him Meanwhile...

have you ever had problems with vvivid gloss carbon? i wrapped my hood, and I think it's getting water inside. it looks like water in the vinyl.

Had a hard time watch you struggle. Lol

como diablos lo logra?¿¿??!

I know you do this for a profession but I don't see that trunk lasting

Hello i would like to have your contact for business

You Should Let Me Record Your Videos!!! I’d. Do A Better Job!👌🏼

I was specifically told by my my instructor to not use heat when applying. To only use heat to fix bubbles and wrinkles or to help the vinyl memorize the surface after applied. He said you don't want to risk stretching the vinyl. Was I taught incorrectly?

@40:50, fail

it' s not the good way to wrap a trunk, too much tensions

There is a million ways to install that trunk and it took you way too long to complete. What kind of squeege technique is that? Dude learn how to hold a squeege and push the air out. Wowowowow that’s what my competition looks like y’all crazy for even making videos of u struggling wrapping a trunk LOlOlOL

"As you can see, the line is nice and straight". ..... actually, no it's not lol

Suck down some vinyl...bro bro.........

Not fun!

Не вижу профи в его руках . Такое можно за 15 мин. сделать, а он 40 тратит.

The vinyl is awful .. making it hard for yourself