Classic VW BuGs How to Repair Restore Beetle Heater Channels pt.1

Рет қаралды 214,979

11 жыл бұрын

www.ClassicVWbugs.com
This is a short video on Heater Channel Repair on your Vintage VW. A full extensive DVD can be gotten by the "BuG Me Video" team.

Пікірлер: 63

@comicfreak5000 11 жыл бұрын

I bought a 1971 super two years ago as my first car. It was cheap and looked ok so i thought classic car for good price alright. Since it has become a mini resto project for me and my dad. You and your videos have helped me tremendously. Without you i would not have near the knowledge I do today about classic VW's and for that I greatly thank you. Keep you loving what you're doing and helping youtubers like me with their cars. Cheers

@cornishcarrot647 7 жыл бұрын

Andrew Shepherd

@zodiam1 11 жыл бұрын

Thanks for recommending the Bug ME videos!!! They have been a God-send!!

@zaharin4o3 11 жыл бұрын

Благодаря ти Крис-твоите съвети са безцени!!!

@classicvwbugs 11 жыл бұрын

Thank you so much my friend. Here to help you guys.

@classicvwbugs 11 жыл бұрын

That video is available, I mention it a few times throughout this series. The bugmevideo series has a dvd on heater channel restoration. It is out there, and has been for over 10 years.

@christinewoodruff255 4 жыл бұрын

Wow, makes me realize just how solid and well preserved my 69 is, I'm fortunate.

@ZEE_072 4 жыл бұрын

Same bud, my beetle has been out side, no glass for a while now,but she's so primered up there's almost no rust if any, just surface.

@axl34rose 11 жыл бұрын

its amazing how rotten those heater channels are, im so glad mine are in great shape cos it looks like hard work. is there salt on the roads in winter there to be so rusty

@classicvwbugs 11 жыл бұрын

No, oval dash actually came in middle part of '52. Split windows ended at the very start of March of '53, so ovals started March 10th of '53. So it reality, 53 is a very short year for the oval window, and it is the only year that the oval had 25hp, thankfully I have that original motor for this bug. Go to my website and see the progression on this car, it is stunning.

@SuperManeis Жыл бұрын

Exelente trabajo amigos!! Tengo una pregunta, le pusieron tubos dentro del canal de calefacción?

@chairuser4 11 жыл бұрын

Great find,very rare car

@classicvwbugs 11 жыл бұрын

I have videos on my site on "what to look out for before buying a bug" Like 9 part video on what to look for. Also, in this video and the part two of this video, I mention that you can use an angle grinder and a sawzall.

@classicvwbugs 11 жыл бұрын

Ah that is awesome man. When you are done with the car, email it to me, I will post it on my site.

@jameslawhorn6096 6 жыл бұрын

Mr Chris i hear people say so many things concerning rust proofing which rust proofing do you think is best for undercoating and inside the car which one stands up well fading again sun light and which brand stands up all round and is long lasting over all.

@coreyandnathanielchartier3749 5 ай бұрын

I'm surprised your welder friend can even see anymore. I have a couple of old welding helmets I'd gladly give him one.

@alexcockerill 10 жыл бұрын

chris! seen many of your videos, can you explain to me how to replace the heater channels without removing the pan?? i want to do so with my car. i think i understand, unbolt, cut them out lift up, weld in then bolt in and done? sounds easy… am i close?

@da-madmodler4692 7 жыл бұрын

I'm new to the restoring a bug thing but we grew up with a squareback in the family. I'd love to build a fastback but guess they are almost all gone like the notch and square.

@djclown7pb 6 жыл бұрын

So they do sell after market heater channels I was thinking about using pipes

@classicvwbugs 10 жыл бұрын

Hmmm yeah, I dunno man, you can do it, but I do not recommend it. To do the job right, the body should come off the pan. You need to get the BugMeVideo dvd on floor and heater channel replacement.

@tewodroszemene4039 Жыл бұрын

That is Great Have You 1970 VW Beetls in Good Condition to buy ?

@robertbrown3037 5 жыл бұрын

Do you have a video on rear cross member

@vwmetal66 11 жыл бұрын

I have a question not about the heater channels but of the actual car. Wasn't the 53 the last year of the split window and the first year of the Oval Window Dash???? I could be wrong.

@aneyesky 11 жыл бұрын

Serio needs better eye protection. Those micro arcs can scar permanently! I know some old timers that have issues from plasma cutting with no shading. Another interesting video Chris. Mike from Oregon

@santiagochris9022 2 жыл бұрын

i realize I'm kinda off topic but does anyone know of a good place to watch new movies online ?

@tobyhouston2514 2 жыл бұрын

@Santiago Chris flixportal

@santiagochris9022 2 жыл бұрын

@Toby Houston Thank you, I went there and it seems like they got a lot of movies there =) I appreciate it!

@tobyhouston2514 2 жыл бұрын

@Santiago Chris Glad I could help :)

@classicvwbugs 11 жыл бұрын

No doubt Mike! And guess what, it has happened to him before. Magnets took the shavings out.

@queLoucura17 8 жыл бұрын

A caixa de ar é made in Brazil - "Zito Pereira"".

@Emperorprime 3 жыл бұрын

They do make somewhat year specific heaterchanells today right? I belive u mentioned this in a newer video, but I cant find it so I can order xD

@classicvwbugs 3 жыл бұрын

Yes klassicfab.com

@alexandros13kimon 8 жыл бұрын

how much does this can cost?

@SERGIO-ym5pc 9 жыл бұрын

Chris, can you please tell me why gas is going into the engine case

@countryclubpga3309 3 жыл бұрын

Piston rings

@ubacow7109 7 жыл бұрын

so what exactly does the heater channel do? I have to replace mine but i thought it was just for chassis reinforcement. Whats the heater part about it mean?

@classicvwbugs 7 жыл бұрын

uh... heat travels through it.

@ubacow7109 7 жыл бұрын

Chris Vallone but what for? modern cars dont have them? is it just to bring in heat to the interior?

@classicvwbugs 7 жыл бұрын

yes it is heat and structural support.

@ubacow7109 7 жыл бұрын

How does it exactly take heat from the exhaust? I would think am exhaust leak into the cabin would lead to terrible things.

@ubacow7109 7 жыл бұрын

Nikola Chikos I'm planning on powder coating my chassis, would it be unsafe and counterproductive if exhaust gasses went through them?

@pauladdison9978 7 жыл бұрын

Fook me the guy is rough he blew holes in the body welding the bracing in.

@vdubbers 4 жыл бұрын

paul Addison yeah right .....he said hes AN EXPERT WELDER... I wouldn't let that twat anywhere near my beetle ,,,,what a fuken cowboy

@tubergenmotorsports4193 3 жыл бұрын

Ark welder Cutting torch it's 1970 LOL!!! Seems like you would be more careful with such a vintage bug.

@shawnsutube 8 жыл бұрын

I figured by your comment that j was going to be able to go to your channel and see lots of videos of the correct way of doing things but not one single video, typical keyboard know it all I guess.

@shawnsutube 8 жыл бұрын

That comment was meant for the Allison Watson below me but oh well, they're not worth the effort of typing it again.

@hectorandresmaciasmartinez2705 5 жыл бұрын

Cutting like this its asking for ditorssion problems.

@nekbiodieselworks 4 жыл бұрын

A cutting wheel would do a slicker job than this

@allisonwatson7204 9 жыл бұрын

That's one way to ruin an oval window beetle! Proper panel removal should be the reverse of how it was installed, by removal of the factory spot welds even with very rusted panels like this. By hacking it apart with a cutting torch you make an uneven surface to reattach the channel which can hurt it structurally and devalue the car by making a non factory style repair. And if you plan on making an educational style video, wear the proper ear and eye protection!! I cringed watching episode 3 when your guy got the molten piece of steel in his eye!! You obviously need more education especially before you try selling these cars. Buyer beware!

@suharinos 6 жыл бұрын

Yeah, hurts my eye to watch something like this that is done such shit way. And they make videos how to do it, oh my god is all I can say !! They completely ruined this body and hopefully someone will do it correctly and restore this beautifull vintage peace. This idiot should move to a India and shipwrech harbour where they ripp ships apart with torch.

@speedydry 4 жыл бұрын

Just glasses for oxy cutting? Risky.

@andrewsoupene1028 3 жыл бұрын

Why isn't he wearing welding goggles?

@suharinos 6 жыл бұрын

Another sad video how you do things quick and shit. Now this time we use blow torch to get rid of some metal... Drilling off welds and carefully preparing edges to joint new sheet metal part once again together never crossed his mind. Why not, just do it shitty and sell it fast. Another good VW raping video on KZfaq.

@classicvwbugs 6 жыл бұрын

Hey ladies and gents what we have here is just another internet Gangsta HATER. The type of guy that is a lot stronger sitting behind his computer screen POUNDING the keyboard as he sits in a basement waiting for his mother to call him up for dinner, and to also tell him she folded his laundry too. See this guy would never walk into my shop and stare me in the face and rip like this. All kidding aside, this is just one way of doing things my friend, you have a better way of doing things? Then get off the computer and make a video to show the world your skills and contribute to the VW community instead of ranting. Last I checked, this car came out incredible www.classicvwbugs.com/2013/03/28/1953-oval-window-vw-ragtop-euro-beetle-bug/ Still holding strong, lets see what you are working on.

@classicvwbugs 6 жыл бұрын

1st off these are not all the methods we use, this is just ONE way. We actually rarely torch, I think we only torched heater channels with just this car, the car still came out killer. If you are so good at what you do, a professional as you say, well then a pro would snap pics or take video. Text can only go so far, show us your talent and let the VW community learn from you. I do these videos for free on my own time along with running a VW business, I have over 425 videos on youtube contributing to the VW community on a weekly basis. What have you contributed? I see a lot of talk but no show.