Clean House Water with Rusco Spin Down FS2 5mb

Рет қаралды 9,735

Күн бұрын

The Rusco spin down filter has lots of options for inner filters. This is the FS2-5bm filter. This water filter is designed to capture particles found in your water so they do not get into your home.
Check out the filter cartridge lineup here on the website:
www.rusco.com/elements-and-ca...
You can also buy Rusco here:
amzn.to/3Z3rvLh
Ram Pumps available on AMAZON
amzn.to/2EWrQHN
Also available on Land To House Website:
www.landtohouse.com/rampumpsales
Help Support land To House by Paypal:
paypal.me/landtohouse
Send Mail to Land To House:
Land To House llc
P.O. Box 323
Micaville, NC 28755
See whats coming up before it hits KZfaq on my Facebook Page:
/ landtohouse
Land To House is a participant in the Amazon Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com

Пікірлер: 26

@450rhino1 Жыл бұрын

Good information. Sure shows the importance of using filter systems. I use a 5micron filter just before my RO "drinking water system". This pre-filter gives me one year for the 4 RO filters instead of six months.

@waylonhartwell Жыл бұрын

I would be curious about hooking up a irrigation valve that would open up daily for about 5 minutes on the spin-down filter letting it flush itself out automatically with a simple setup I bet you got some really good filtration with a simple automatic flush happening every day

@frenchopotamus Жыл бұрын

A programmable garden hose timer works well for this application. They're about $30.

@LandtoHouse Жыл бұрын

The company actually sent their new automatic flush valve to try out. I'm looking forward to giving it a go.

@frenchopotamus Жыл бұрын

@@LandtoHouse That's great! I hope you'll do a video of it in action.

@stevenfrazier8939 Жыл бұрын

I use a 15 micron cleanable Rusco Spin Down before it goes into cleanable and re-useable polyester 2.5”x10“ set of 20, 5, and 1 micron nominal filters. I enjoy not having to spend money with each filter change. We have two sets of filters, three to use and three that are cleaned for next use. We use Bio-degradable soap and then Oxalic acid soak and rinse.

@troyw8338 Жыл бұрын

Had this problem when I built a new house back in 99, in 2011 the pump was acting up in my well so I had it replaced. The well company that did the work found the screen filter on my old pump was missing. Ever since the new pump and screen were installed I only have light rust in the filter at replacement every 3 months .

@vica153 11 ай бұрын

Plumb a bypass around the filters. Not just for bypassing them if needed, but also for flushing the filters. You could back flow a couple gallons thru the filters and hopefully flush them better. Assuming the filters can handle reverse flow for a short period. You could also mount them higher off the ground for easier access while plumbing in the bypass.

@TdrSld Жыл бұрын

I would more than likely have two spin down filter in series, the first would be the OG you had been using and then the new filter type after that before the woven filter. The rig up a automatic flush system either with a sprinkler control system or if Rusco has something to do it. With your setup being under the house in a crawl space I know it's a PITA to maintain on a bi-weekly base. Doing it that way would more than likely cut down on cost and time spent under the house.

@darthgbc363 Жыл бұрын

I believe you should have a few of these in parallel. But a courser filter before them. To get a longer period before cleanout.

@fakename9024 10 ай бұрын

Automatic Flush System would be nice.

@1981dasimpson Жыл бұрын

what about running your normal one then the new one so more filters for it to remove more sediment

@Suchnsuchhomesteadja Жыл бұрын

Have you tried puttjng in another spin down that is 40miron .. i use a 100 micron then a 40 mircon ... it really save the final filter longer I have 100 - 40 - 25 - 5 then a 0.1 under my kitchen sink for my faceted

@erickfinnell637 23 күн бұрын

Im curious what micron rating you use on your whole house filter after your Rusco filter.

@M.J.C.W. Ай бұрын

This is a silly question, but have you thought about putting an automated ball valve on the flushing outlet to reduce the time that you have to manually work on it?

@LandtoHouse Ай бұрын

Rusco actually sent one of those. I just have never installed powered down there to get the automatic valve working. Seems like a good idea.

@mandog2142 Жыл бұрын

I'm thinking of putting a Rusco filter similar to yours but in front of the pressure tank because the tank seems to trap a lot of sediment and then blows it out into the system sometimes instantly clogging the filter. I was wondering what your experience has been with your pressure tank and whether or not it traps silt. Great informative videos L2H! Thank you!

@LandtoHouse Жыл бұрын

I recommend that you not put a filter before the pressure tank. If the prefilter gets clogged the relays will tell the Well pump to continually run until everything Burns up.

@mandog2142 Жыл бұрын

@@LandtoHouse Thanks for the advice! Much appreciated.

@user-de1fu4vi9s 9 күн бұрын

@@mandog2142 Also when the bladder within pressure tank fails, the filter will prevent rubber shreds from clogging your house pipes.

@Jkauppa Жыл бұрын

how about spin up centrifugal filter (virtual low density filter)

@Jkauppa Жыл бұрын

its a fin cross spinning cone shape, centrifugally rising in force with increasing radius

@Jkauppa Жыл бұрын

yes its like Archimedes screw pump filter in a way

@Jkauppa Жыл бұрын

inventing public domain free open source simple stuff is fun, then you dont have to buy more complex things from anyone, unless you will not do it at all, well sorry then, stores close, diy starts