4 Years Later - Whole House Water Filters Update

Рет қаралды 197,149

2 жыл бұрын

Install Video from 4 years ago ....... • How to Install a Whole...
iSpring Filter Video .......................... • iSpring WSP-50 WSP-100...
Culligan Filter Video ........................ • Culligan Water Filter ...
List of all the materials & tools i bought: ($400 total)
Water Filters:
CULLIGAN WH-HD200-C Filter .......... amzn.to/2utRPSo
(alt) DuPont WFPF13003B Filter .......... amzn.to/2HEm7KD
Culligan RFC-BBSA Premium Filter .......... amzn.to/2urSzY7
iSpring WSP-50 - Water Filter .......... amzn.to/2HEiEfh
iSpring WSP-100 - Water Filter .......... amzn.to/2JDEqS7
PEX Pipe Material & Tools:
Crimping Wrench .......... amzn.to/2X7l4Xc
3/4" PEX Pipe .......... amzn.to/2Xa7NNL
PEX Cinch Rings .......... amzn.to/2GdeLLb
90 deg Elbow .......... amzn.to/2UzkIM8
Butterfly Valve .......... amzn.to/2P42oF0
3/4" Tee .......... amzn.to/2UeRq0v
PEX to Threaded .......... amzn.to/2VE7Bpy
PEX to Threaded 2 .......... amzn.to/2P7eNYI
PEX/PVC Pipe Cutter .......... amzn.to/2X0uLGW
Pressure Gauge .......... amzn.to/2IspLH7
Depth Gauge .......... amzn.to/2GdfoV3
PTFE Tape .......... amzn.to/2IfBDgk
1/2"Male to 1/4" Female .......... amzn.to/2Igi0EX
SharkBite 90 Elbow .......... amzn.to/2X40gQs
3/4" to 3/4" Male ..........amzn.to/2KzcajS
This video is going over the whole house water filter system i installed 4 years ago. Pointing out the good and the bad - what worked and what i would change.
Using PEX pipe worked great. Super happy with that. Easy to install - zero leaks.
The 2 types of water filters i installed are also great.
The pressure gauges i would not do in the future. Not needed and i never use.
Disclosure Note: The above links are Amazon Affiliate links. There is NO additional cost to you, however I get paid a small percentage from Amazon if you purchase after clicking on the link.

Пікірлер: 240

@DaveWirth 2 жыл бұрын

Bulk Filters: amzn.to/3wk9Wxq and amzn.to/3UBO0Ho Install Video from 4 years ago ....... kzfaq.info/get/bejne/ZsV2ktuGsK7bcoU.html iSpring Filter Video .......................... kzfaq.info/get/bejne/fLWcf7eDnrS2qWQ.html Culligan Filter Video ........................ kzfaq.info/get/bejne/mLtplsKB2bu4nYU.html List of all the materials & tools i bought: ($400 total) Water Filters: CULLIGAN WH-HD200-C Filter .......... amzn.to/2utRPSo (alt) DuPont WFPF13003B Filter .......... amzn.to/2HEm7KD Culligan RFC-BBSA Premium Filter .......... amzn.to/2urSzY7 iSpring WSP-50 - Water Filter .......... amzn.to/2HEiEfh iSpring WSP-100 - Water Filter .......... amzn.to/2JDEqS7 PEX Pipe Material & Tools: Crimping Wrench .......... amzn.to/2X7l4Xc 3/4" PEX Pipe .......... amzn.to/2Xa7NNL PEX Cinch Rings .......... amzn.to/2GdeLLb 90 deg Elbow .......... amzn.to/2UzkIM8 Butterfly Valve .......... amzn.to/2P42oF0 3/4" Tee .......... amzn.to/2UeRq0v PEX to Threaded .......... amzn.to/2VE7Bpy PEX to Threaded 2 .......... amzn.to/2P7eNYI PEX/PVC Pipe Cutter .......... amzn.to/2X0uLGW Pressure Gauge .......... amzn.to/2IspLH7 Depth Gauge .......... amzn.to/2GdfoV3 PTFE Tape .......... amzn.to/2IfBDgk 1/2"Male to 1/4" Female .......... amzn.to/2Igi0EX SharkBite 90 Elbow .......... amzn.to/2X40gQs 3/4" to 3/4" Male ..........amzn.to/2KzcajS

@twbrkfd1733 Жыл бұрын

i have a pleated filter to remove larger chunks and then a charcoal filter to remove chlorine. Charcoal filter lasts a lot longer with the pleated pre-filter. Hang the filter wrench on the wall next to the filter.

@jaandel1 9 ай бұрын

@DaveWirth what about chlorine in your water or scale... we know this will may damage your pex pipe over the years. about copper my home 100 yrs several repair here and there. pinholes no water system filter yet. i am planning to replumbing whole house... bc of a bathroom renovation so i am looking to use pex . copper $$$

@Jinkins100 4 ай бұрын

WOW!!! Thank you so much for the 4-year update video. I don't think I have ever seen anyone do an update video on projects that I am researching. Much appreciated. I was not planning on installing a pressure gauge but I will be installing at least one now. I figured it would be a good way to see if I have any leaks that I cannot see downstream.

@i_know_youre_right_but 4 ай бұрын

I did “NAZI” that coming!!!!!!!!!

@GScottJohnston 2 ай бұрын

Thank you for making a concise, clear, structured video, without any filler or unnecessary time wasting. That was exactly the right length, without missing or extra info. Great work.

@bondarenkodf 3 ай бұрын

Wonderful job! To observe a pressure difference, you need to install an output valve after the second gauge, which can release water into a bucket or the sewage system. Simply open it and monitor the pressure difference as water flows. By relying on pressure difference rather than a fixed interval for changing filters, you may have the opportunity to save some money.

@Fatfett 3 ай бұрын

This was my exact thought when hearing he was changing the filters monthly. Could probably get by changing them much less often. Generally mechanical filters (filters with a fine filtration media as opposed to activated carbon) continue doing their job for a very long time, they just get clogged which reduces water flow. One other tip is to pipe the inlet and outlet together and put in ball valves. Put a gauge in that header pipe instead of 2 separate gauges in the inlet and outlet. This way you can measure inlet pressure, outlet pressure, or difference in pressure just by manipulating the valves, all with a single gauge. Measuring a pressure differential with 2 different gauge could introduce a ton of error if each gauge is not well calibrated.

@BenjaminHansen 2 ай бұрын

@@Fatfett I cannot picture this in my head. Maybe I'll come across a diagram during research.

@pnorton75 3 ай бұрын

Definitely use pressure gauges. You just need to know when to read them. That is the absolute best way to know when you need to change your filters. You should also notice a difference in the pressure when you're showering or using water in your house.

@SuchKwach 2 ай бұрын

I live in Russia and use 3 step filter: 5micron, 0.8 micron and 0.1 micron. All they cost about 60$. Change them once a year or after 10 months

@Freely_Accepted Жыл бұрын

I work in Water Filtration. Installing whole home filters, reverse osmosis. Treating everything from city water to well water. Industrial and residential. Sir, you did an excellent job. Very clean fits. Pressure gauges will let you know if a filter is clogged, but since you use housings that you can see. And you check on your stuff (you would not believe how many people do not do that). You did a great job explaining the use purpose, and the frequency of servicing. Good video! Cheers!

@pete.donohue Жыл бұрын

Amen to that Mr.Bear!

@JanColdwater Жыл бұрын

Reverse osmosis cleans out fluoride and chlorine too?

@Freely_Accepted Жыл бұрын

@@JanColdwater Yes. It also greatly lowers bacteria contaminates. If you flush the membrane for 5 minutes every two weeks, (some come with flush valves for the membranes), it helps maintain the membranes life, keeping it free of clogging up with contamination. I’ve changed some membranes that people did not flush, and they were covered in slime, gunk, and had a “beer” odor. I’ve changed others where they DID backwash them, but the membrane needed to be replaced, but it was not clogged (still clogged) as bad as the ones whom did not flush them.

@JanColdwater Жыл бұрын

@@Freely_Accepted Thank you so much. Could you please recommend one that you like best?

@Freely_Accepted Жыл бұрын

@@JanColdwater 5 stage Proline Plus. Are you in the US?

@lovewenwin 3 ай бұрын

Thank you for the updates

@gpleeser5832 Жыл бұрын

Thank you on a different level for the update man!!!

@ryancolebourn3060 Жыл бұрын

Great system and update, thank you for sharing!

@freddysflyz 10 ай бұрын

Thanks for the great video... I'm lacking space to go off the rails but like the idea of the spin down (50 micron) and the 5 micron sediment filter. That should take care of us here. Thanks for sharing your system!

@09boydie Жыл бұрын

I used your original video to install the same exact system in my house. I've been using it for 3 years now and no problems at all. You designed a great system - thank you!

@bratecyo 4 ай бұрын

thanks Dave, you've confirmed my thoughts on filtering.

@tshaw1886 Жыл бұрын

So impressive! I love the thought that you put into every detail of this system!! Storage, whiteboard, notes, everything!! You are amazing 🤩

@gaddur1 9 ай бұрын

Hi Nice to meet you via this way where can l. Buy this systeem

@siecieh 2 ай бұрын

great setup

@lex8561 2 жыл бұрын

Thank you for this update. I am in the process of installing a new whole house water filtration system and I'm following your install video to a T. I am only installing the culligan filters, no ispring. Im skipping the pressure gauges now after watching this video.

@typewriteryt 4 ай бұрын

Awesome info. Thank you for the follow up.

@dc5duben96 Жыл бұрын

great update👍🏽

@dwightrivera3281 Жыл бұрын

Awesome video!!

@jimbodee4043 2 жыл бұрын

Interesting update.

@pearseobyrne Жыл бұрын

Thank you so much, you've made everything perfectly clear to me. Cheers, Pearse

@jamesortolano3983 2 ай бұрын

As someone who has put in quite a few filter systems ,I'd say this is a great job ! You should show people the bi-pass you put in ,or discuss how you work it nd why . I've put in magnetic ,nd ultra violet piping as well. What ever you want to pay for . I still use a 3 stage omni system for my home . Filters go by different names now . Much appreciation For your time ,editing, nd posts

@anjabankien2527 Ай бұрын

Great video

@dalerardon1687 3 ай бұрын

Great Video! Thank you!

@apollyonxxx Жыл бұрын

Thanks! Great data.

@craigmiller8902 9 ай бұрын

Outstanding video. I did a fairly similar system in Florida. It works.

@Mugennunez 3 ай бұрын

That pex b pipe is killing your water flow, copper or pex A stays full bore. Stay away from pex B all those fittings reduce your pipe ID.

@bd9494 2 жыл бұрын

thanks for putting this together. It was super helpful. One addition you could consider is adding a reverse loop to your spindown filters. That would let you backflush into the clear hose and probably reduce the interval you need to take the screens out and clean completely.

@DaveWirth 2 жыл бұрын

Didn't know you could do that. That's a good idea.

@DilettanteDon Жыл бұрын

This is an excellent idea. I just removed 2 ispring filters from my system because the flushing mechanism really wasn't good enough.

@freddysflyz 10 ай бұрын

Hi - Would somebody please explain the "reverse loop" in this scenario. I'm going to install new sediment filtration and this sounds like a popular idea! Thanks in advance!

@urbanturbine 10 ай бұрын

@@freddysflyz you add piping around the filter to reverse the flow through the filter.

@craigmiller8902 Жыл бұрын

Thanks!

@mohammadaarifkhan737 3 ай бұрын

Can't thank you enough for the video ❣

@j.777hemi2 3 ай бұрын

Great system, it will increase the life of all your water appliances, especially the hot water heater.

@MiguelFerrer-jc2wx Ай бұрын

THANKS, GREAT INSTRUCTION,

@peternguyen4907 Жыл бұрын

Thanks for sharing. I have mine outside the house. I hardly monitor the system. It about time to modify.

@jamessullivan6985 3 ай бұрын

First time viewer……..well done, keep up the good work….

@haiping0918 2 жыл бұрын

thank you!

@WiSeNhEiMeR-1369 2 ай бұрын

Thanks, COOP ...

@alejandrahugues493 Жыл бұрын

THIS HELPS SOOOOO MUCH, THAKS!!!!

@DIYKAI Жыл бұрын

Excellent we did a similar 5 stage down to .5 micron

@deepakshinde7997 10 ай бұрын

You are amazing

@brentjohnson6654 Жыл бұрын

Very nice update. I am on a pump in Texas and I have terrible sediment issues. The filters I have tried in the past have reduced our pressure from 60psi to almost a dribble in the shower (not sure on psi at the house). I am interested in the spin down filters for removing some of that before I filter it - I like how you put this in. I am considering going with pet also as you did. All of my previous pipe out in the pump house have been PVC. That froze a couple of years ago when we had rolling blackouts here in Texas. It was even -6F! I grew up in Northern Minnesota so I have seen cold weather in the past, but we never had the power go out in a blizzard like that. Haha. Thanks for your videos. I have added your list to a Amazon list for me as I consider what to do. I am getting the water tested again to see a before and after. Along with this whole house filter I plan on putting a under the cabinet filter in the kitchen. Thanks again for your videos. They have been instructive and give me ideas on what to do.

@BenjaminHansen 2 ай бұрын

I'm in central MN, not happy with the rust in my well.

@brentjohnson6654 2 ай бұрын

@@BenjaminHansen my grandparents used to farm in the Cambridge/Mora area. I lived on the Iron Range until college.

@Suchnsuchhomesteadja Жыл бұрын

Good video my bro ... hailing from jamaica 🇯🇲

@PRR1954 2 ай бұрын

This is similar to what I put in 9 years ago for iron-rich well water. One personal choice: I took a tap after the spindown and before the pleated filters for the outside faucets--- a little dirt won't hurt outside waters but I was getting teeny gravel which jammed the faucets. This also simplifies the winter shut-down: I can close that side-tap and drain the outside faucets with less running around. More than justifies the extra 40' of PEX to have the outside faucets on dedicated lines.

@CarolineAkwi Жыл бұрын

Thanks

@rafterwhomestead 4 ай бұрын

Nice, I'm building a filter system for our home. We have well water and every so often our shower pressure drops off a bit. I'm suspecting some debris/particulate matter is getting caught up in the needle valve of the shower to adjust the flow, once I slightly adjust those valves closed and back open, the pressure is back to normal. I'm going with the two pre-filters that you've placed with a 100 and a 50 micron. Rather than two smaller culligan filters, I've opted for a single large 5 micron 3M AP904 filter as we have scale issues that I'm hoping this will also address. Its a pricey filter to replace so I'm hoping the two pre-filters will help extend the life of it. Our water quality is not too bad, the primary issue is the hard water/scale. With the well and our sandy soil conditions, I suspect some fine sand and particulate matter does make its way through our water system. Will know for sure after these filters!

@tealkerberus748 2 ай бұрын

The only issue with the pressure gauges is that you do need to be looking at them while something is using water. Washing machine, dishwasher, or running a bath all take a fair amount of water flow. It's kind of obvious that when no water is being used, the pressure on the downstream side of the filters will creep up to equalise with the pressure on the upstream side.

@gr8dvd 2 ай бұрын

👍 Or as another posted just a flush valve into a bucket to observe pressure differential, if any.

@lobdsk 10 ай бұрын

I followed your advice and my water is wayyyyy better

@EasyLiving8 Жыл бұрын

Thank You Sir to taking the time to do this video and share your experience with us.

@keithsams4301 9 ай бұрын

i have the culligan filters too..and they have been great..i love them..but a couple days ago one of the tanks got a fracture in it and started seeping water...culligan does not offer parts for these..and of course the by-pass on the filter is stuck..and i didnt plumb in a by-pass...so i ordered a new filter and the plan is to just use the tank from the new filter when it gets here and put it on the old head...but if i have to change out anything i will replumb and build a by-pass, so i can work on these things and still have water...also, it would be a good idea to have unions on both sides of the filters to take them compleatly out of the system if need be...to replace the filter housings them selves...just thoughts im learning now that i have done it..and re-thinking the plan

@shiningstone9451 Жыл бұрын

great job！！！！

@manxman8008 3 ай бұрын

Hmm if only the water company would do this. Good job!

@tealkerberus748 2 ай бұрын

Except a surprising amount of water gets used for things like watering lawns and gardens or flushing toilets where the water really doesn't need to be filtered to premium drinking quality. Separating that out from actual drinking water would mean two parallel sets of pipes to every house in their service region, with all the cost hikes implied. Also, one of the things people are most interested in removing from their town water supply is chlorine, and the supplier has to add that to stop pathogens growing inside their pipes. All up, it's more efficient if the water provider quality standard is set at "not dangerous to drink this" and households control their own equipment to raise the standard to "actually attractive to drink."

@WillieStubbs 3 ай бұрын

I like the pressure gages that have a garden hose connector on them and when I need to check the pressure I just put them on the end of the spigot. Then I can leave them on the shelf until I need them and I can use the spigot to drain the system or run water from a hose. For my new home I'm planning on having a parallel system with a Sediment filter and a Charcoal Filter on each leg so the incoming water will split into two legs with 2 filters each so the water pressure won't diminish much. I have 1" pex going to my filters at the well so the entire system will only have filtered water going to it.

@stargazer7644 3 ай бұрын

I did the same thing, but I just used one culligan filter and I use the 5 micron activated carbon filter. It takes care of nearly all the iron in the water. I also put in two pressure gauges, and I agree they're useless. Even when the water is flowing and the filter is completely end of life they don't show a pressure difference.

@FillUps007 9 ай бұрын

Great job. I’m duplicating your 4 filter setup, except I’m going with two Culligan WH-S200-C filter systems

@colinbluth5461 2 ай бұрын

cool info :D

@geoh7349 2 ай бұрын

I put an iron and magnesium big blue filter in and it helps a good bit

@jerryrobinson7856 Ай бұрын

❗️Good video. Also, nice hand writing, like an engineer. WASHER OVERFLOW: We had an incident with a first floor clothes washer over flowing and almost damaged a wood floor in the hallway even though there is a drain between the washer and dryer. Put a seal bead of silicone on the laundry room baseboard. I had the plumber add an inline main water low voltage motorized shut off tripped by a laundry room floor water sensor which also trips the alarm system “Laundry Room Floor Water Sensor”. Which causes a beep on the alarm keypads and Alarm Central calls so if you were away, you would know to return immediately. The goal is never to have an insurance claim (annual no claims discount eventually pays for all this) and just avoid (mitigate) from a grand mess to begin with. BTW, the GE clothes washer has a common “reset water level” at the end of the knob turn for water height. The overflow was caused because the water level dial was set to maximum and a smidge more it got stuck in the “reset” position because there is a defect in design of the switch. The reset has a common spring snap back making it a momentary switch operation, but there is a mechanical ‘unsweet dead spot’ holding the reset trigger “on”. There is no safety in this premium washer to stop the water flow. Think like an engineer… Avoid.

@cageordie Жыл бұрын

After watching your first video I decided to use a 20" filter. I don't have space for too many. The water softener also came with a 10" filter, so I fitted that but I think it restricts the flow. During the fast rinse on the water softener I see 15psi drop across the two filters. I have a 200 micron spin down, then 20 micron 20" then the 10" carbon filter that came with the water softener. I used 1" PEX-B and the crimps are much harder to make. I checked the gauges while my wife or daughter was in the shower to see what pressure drop I am getting too. That was less, more like 5psi, because the showers have flow restrictors.

@ShrimpCracka Жыл бұрын

have you tried not putting in a filter for the last carbon filter to see if you are still getting a psi drop? I'm debating atm whether to use 20"x4.5" or 10"x4.5" filters as I don't want a significant drop in pressure.

@judyb4288 Ай бұрын

Thanks for the update, and what brand are the larger filters, the five & the one?

@DaveWirth 29 күн бұрын

I've bought these before: amzn.to/3wk9Wxq And these: amzn.to/3UBO0Ho

@ialso 2 ай бұрын

Yes very interesting, but did this system address the iron in the water? I would really like to know or was iron not an issue

@twbrkfd1733 Жыл бұрын

A charcoal filter is needed to remove City water chlorine which deteriorates the phosphate scale inhibitor used at the input to a tankless water heater. No spin down needed with City water; except when hydrants are flushed, so not worth the added work of maintenance.

@SomeThingsToHelpYou Жыл бұрын

Hi Dave. Thanks for taking the time to give us the update on your Water Filter System. I have a few specific questions for you on the Culligan Water Filter Housing Valve on top. If I don't have water shut-off valves before or after the Housing, can I simply turn the Blue Valve to the Off Position or Bypass Position and change my filter? Will water keep running through my water lines if the Blue Valve is in the Bypass Position. Also, will water come back out of the outflow sided of the Housing Head if I turn the Blue Valve into the Off Position and then change my filter? Looking forward to your response. Thanks again.

@DaveWirth Жыл бұрын

I think you can turn the blue valve on top, but when i tried it, mine didn't rotate. I didn't want to break it, so i didn't force it too much. There was someone in the comments below that said the same thing, theirs seemed stuck and didn't want to break the plastic. But yes, the top should act as a bypass valve and you can change the filter....at least that's what i understood.

@reidcrosby6241 Жыл бұрын

Don't depend on the housing filter always being functional. They can and do sometimes lock up.

@urbanturbine 10 ай бұрын

thank you for this follow up video! I am going to build the same. I noticed they have spin down filters with automatic wash down... expensive but pretty cool. Quick question: What type of material did you choose for the wood board and what kind of paint is it?

@DaveWirth 10 ай бұрын

just a piece of plywood i had lying around and whatever paint i use for walls ( i didn't buy anything, just used what i had in the garage)

@veoteveo1 3 ай бұрын

Add a flowmeter and change filters per totalizer every to months or more depending on the usage

@veoteveo1 3 ай бұрын

I would also remove the uv and place it recirculating the water in the tank continuously so that you get about one circulation of the volume of the tank per day

@micmike 3 ай бұрын

Hi thanks, for this topic. Very interesting. Question, what does your wife say about the washing machine and the change the filter system made to the laundry?

@DaveWirth 3 ай бұрын

We used to get rust stains on white clothes. Haven't had that issue since Also no rust stains on the bath tub and sinks

@skozzy1968 3 ай бұрын

Cant imagine having water come out of a tap that is not clean, we are lucky here it seems.

@Nitrobucket 3 ай бұрын

Where do you live? I don't think any water in America is considered clean anymore

@Tratios 3 ай бұрын

I am amazed your water coming in needs that much filtering and you burn filters so fast; I will have to go back to look to see what the problem is.

@BenjaminHansen 2 ай бұрын

A lot of wells in the Midwest have iron in them. Have you heard of the Iron Range in Minnesota? I use Morton Rust remover Softener salt in my softener and I still have mild iron stains.

@tealkerberus748 2 ай бұрын

@@BenjaminHansen It stumps me that so many people in the US drink water out of the ground that needs so much filtration to make it clean, when good fresh rainwater literally falls out of the sky. I have a nice clean metal roof and a decent size storage tank, and my drinking water looks and tastes great.

@bigdfig6083 2 ай бұрын

If we could ALL be so lucky... Lotsa area in the US not fortunate enough to get consistent precipitation w semi-arid and arid regions being just two examples. Where I live the average annual rainfall is less than seven inches. At some level I'm sure it makes sense to set up a catchment system, but many aren't anywhere near that amount.

@tealkerberus748 2 ай бұрын

@@bigdfig6083 if there isn't enough rainfall for agriculture, people shouldn't be living there. If you're managing to farm on 178mm of rainfall, then you're creative enough that running a house on that shouldn't be hard either.

@alejandrourizar3814 Жыл бұрын

Thanks, this is great information. I do have a question, which I was hoping you may answer. Is it better to have a larger spin down 50 micron like the "iSpring WSP50ARJ Spin-Down" or its better to combine 2 spin down filters , one 100 micron and the other 50 micron. In my current setup, my 50 micron is clogging in 5 days, so not sure if adding a 100 micron or just getting a larger 50 micron filter.

@DaveWirth Жыл бұрын

sounds like for your situation a 100 micron filter would help. they would "spread the load" and hopefully not clog as easily. for me, the 100 was not really needed, not even sure if the 50 was needed. The iron/rust in my water was smaller than that in size

@fabiancanada8876 Жыл бұрын

Thanks for your video and the good information. We have great water but some sediment issues (sandy/cloudy). We are currently using a small water filter (5 micron) and it works good. However, I have to change the filter at least once a month (the filter is not much, I think it is 5$ or so). Did you see that the Culligan Filter cost like 70 CAD?! wouldn't want to have to replace that filter every month!

@pleskbruce Жыл бұрын

I don't know if Culligan parts use standardized sizes and fittings or not, but any time one uses proprietary systems you're usually stuck using "their" replacement parts or risking low quality substitutes. Think "printer ink"..... :)

@gutrali 3 ай бұрын

One pressure gauge may still be a good idea.... Especially if you don't have one anywhere else on your water system. I installed a drinking water RO system in a new house, and I do monitor the output pressure because it can tell me the membrane health. I noticed pretty quickly that my pressures would spike above 120 PSI after a shower..... Which immediately told me my pressure expansion tank was broken. Replaced it easily and inexpensively, my pressure then never raised above city pressure (70psi), and i likely saved myself exploding pipes or damaged valves in the future. If i hadnt out in that pressure gauge i never would have seen the problem until something finally failed and caused a flood. I also think my mostly PEX piping saved the disaster from happening because it can def expand to some degree.. unlike copper.

@Colt-wr6wx 3 ай бұрын

Is this for a well or city water?..

@hj8607 Жыл бұрын

Check your city line pressure first and if over 80PSI a pressure regulator will help your plumbing SO AT LEAST one pressure gauge should be in line after regulator . And a pressure gauge after one or each filter WIIL help you to not replace filters until really needed. (replace a carbon filter per manufacturer's recommendation regardless of no or little pressure drop) (kinda like having no gas gauge in your car)

@jaycahow4667 3 ай бұрын

Most people do not realize the water company can pump at what ever pressure is required for their system. Depending on how far water has to be pumped and where you are located there can be drastic changes in pressure from one location to another and it can change at any time without notice. The water pressure coming into my house is over 90 psi and I lower it to 70 psi which is still on the high end. The higher the pressure the more likely something is going to burst over time in your plumbing system. That is why every house owner should know their incoming water pressure and better yet have a water pressure control valve in their line to limit the maximum pressure. For those with inline water filters be aware that these filter containers are all rated to a certain pressure and if you exceed it you run the risks of them failing over time. This is especially important on the clear filter containers as they tend to have a lower maximum pressure that the opaque ones.

@EMAINC3 Жыл бұрын

Do you put the Culligan Filter into the "Off" or "Bypass" position when you change the filter and if so - do you really have to lean on it to move the blue "bypass handle" with the filter/handle wrench? I installed one and then went to change the filter a few months later and felt like I was going to break something trying to put it into the off or bypass position (I was using the supplied plastic wrench tool). I had to use my master valve on the well to cut the water off, then open a faucet to relieve pressure, then press the red button on top, and then unscrew the plastic housing (which as you mention in the video can take some elbow grease). Just curious as it would be a much easier process when time to change the filter. I just could not get the Bypass Valve on the Culligan filter to budge...

@DaveWirth Жыл бұрын

I've never turned that blue plastic valve, like you i felt like i was going to break it when i tried. So i just turn off the water at both ends with the butterfly valves.

@jorgenorman8715 2 ай бұрын

Does it have to loop?

@AJafet777 15 күн бұрын

I think you should install this for me. 😭 if I get a Plummer you think they can do it?

@MrCoffeeMrRadar 9 ай бұрын

great job and video, one question. you said that you would have gone with 1 of each for your house. how many people live in your home? I always wonder if more filters should be added depending on people living in the home.

@DaveWirth 9 ай бұрын

3 people nothing to do with the people in the house. Just that after a month, the filter was clogged with rust and it started showing up in the tub, toilets. maybe if there were more people it would mean more water usage and more filter changing

@MrCoffeeMrRadar 9 ай бұрын

@@DaveWirth thank you.

@ShrimpCracka Жыл бұрын

thank you for the update video! I'm in the process of building a filtration system, so your videos have been very helpful. If you're running 2 showers at the same time and lets say a washing machine as well of a total of 7gpm, would you say that getting a 20"x4.5" filter housing would help with the pressure and gpm? what is the psi drop you get when running a shower? or bathtub faucet?

@DaveWirth Жыл бұрын

Not really sure. Maybe at most we would have a washing machine and shower going at the same time, didn't really see a drop in pressure. Although i recently installed a large iron filter (size of a softener) and that caused a drop in pressure, but did get rid of the rust

@ShrimpCracka Жыл бұрын

@@DaveWirth i dont remember if you said in your video, but if you have a pressure reducing valve, you can adjust and up the pressure to make up for the loss correct? or would that introduce some new problems? Thanks again for your response, really appreciate you taking the time to produce the videos

@DaveWirth Жыл бұрын

@@ShrimpCracka I don't have a pressure reducing valve. We have a well and want all the pressure we can get. I even took off the restrictors on our shower heads to get more pressure: kzfaq.info/get/bejne/h9GTraqkutzXZoE.html

@ShrimpCracka Жыл бұрын

@@DaveWirth thanks man !

@cheaptick 2 ай бұрын

Do you have a water softener? I am on city water but sometimes it is discolored. I put a particulate filter after my water softener figuring the that the beads and gravel in the softener would flush out particulates greater than 10 micron allowing the filter to focus on smaller crud.

@DaveWirth 2 ай бұрын

Yes. I just changed the softener resin last year: kzfaq.info/get/bejne/bJhlbLSLkprJcYU.html

@woodzyfox4735 3 ай бұрын

After the filters water softner. this keep the chunks out of the softner that you may not be able to remove..

@motodude23 3 ай бұрын

You could get a backwashing carbon filter that would be maintenance free essentially and a 5 micron sediment after and only change that 1 time a year.

@user-hy7cg9jg5r 3 ай бұрын

I buy the skinny filter cartridges for less than a dollar each, and they last a long time. And... you can still get 25-micron. And... their surface area isn't much smaller than those big bulky filter cartridges.

@DAMG00D 3 ай бұрын

Is it possible that the rust is either from a galvanized pipe? Or from the inside of your pressure tank (i saw you're on a well)? For some dumb reason, the plumber who did the install for this house 30 years ago used a short chunk of galvanized pipe. Well after years of perpetual use, it started to dissolve (rust) and would wreak havoc downstream on everything. The only reason I even discovered that was because I installed a whole house water filter. I replaced/added everything that was exposed from the wall to the well tank(s) & included "main shut off". Which is apparently a no no for a well.

@atlpro05 Жыл бұрын

Would you recommend a novice attempting spin down filter install vs a plumber? I have the spin down parts + iSpring tri-filter parts purchased but plumbers are asking high prices to install

@DaveWirth Жыл бұрын

As long as you use PEX and buy the right parts, it wasn't too bad. I've only done a couple plumbing things around the house before, with copper, and they all leaked at first. The PEX was easy and zero leaks. You can get 2 shark-bite connections for where you are connecting to the copper, then the rest use the connectors that ratchet clamp tight. It wasn't super simple, but not that complicated. Hardest part for me was figuring out what the NPT jargon meant for buying the parts.

@mtdecast Жыл бұрын

Dave, did you put this system before or after your pressure tank? I am very tight on space in the area before my pressure tank. Would there be any negative to filtering after the pressure tank?

@DaveWirth Жыл бұрын

Mine is after the pressure tank. I don't think it would be an issue. I also have a tee which goes to the outside spigots, that is not filtered either.

@ryanspence7239 2 ай бұрын

I cant get over all the use of pex...i get its widely accepted and used but I think one day were gonna learn some real issues with plastic pipes if we havent already

@2112user 3 ай бұрын

Considering a property on well water, so may very well do this if I get it. The question I had was you said you dropped the RO system.... Why did you decide to drop that?

@DaveWirth 3 ай бұрын

We have 2 reverse osmosis systems. The "under the counter" ones that are like $400 on amazon Under kitchen and bathroom sinks In hindsight - should have done a whole house one

@SheriffRoscoP 11 ай бұрын

Hey Dave, where do you buy your filters in bulk from? The Amazon link is for a single filter for $25. I live in Michigan as well and appreciated watching this and the previous install videos of your system. Nice work!

@DaveWirth 11 ай бұрын

I bought all my filters through Amazon. The original company isn't on there anymore. Recently i bought them in 6 or 12 packs through Aquaboon. We had this in our house for 4 years, and just last month i installed a big Iron filter. Now hopefully i only need to change these filters like 2 times per year.

@ZiggityZack 10 ай бұрын

@@DaveWirth Can you elaborate on the "big iron filter?" I'm curious about what you found for that.. thanks!

@DaveWirth 10 ай бұрын

@@ZiggityZack I just bought and installed this, a few months ago: amzn.to/44OhzrP It works great, now zero rust in the water, and don't have to change filters every month. Probably should have done this from the beginning, but i didn't know how bad the rust would be.

@Spinal2111 Ай бұрын

Changing the filters every month seems like a lot. What happens with the old filter - do you just throw it out?

@patklemmensen1694 4 ай бұрын

if your dissolved iron is high, add a 10"x54" tank into your plumbing, ahead of all your filters... pump compressed air into this tank with your incoming water stream, and allow the oxidized - particulate, in other words - to settle in the bottom... you might have to drain & flush this 'settling tank' once or twice a year, but that might be better than changing filters every month...

@pawepanasewicz7679 Жыл бұрын

Did you consider installing water softener after those filters? I'm considering similar installation. After some reading I came to the conclusion that after the filtering, there should be an extra water softening stage. That would i.e. replace calcium and magnesium ions responsible for lime in a kettle with less problematic sodium (or other mineral depending on the salt used in the softener). Also I'd run non softened water into separated tap in a kitchen - just for drinking. Said that I might be wrong... As I said I just did some small research so far, after more lectures I can come up with different conclusions. What do you think?

@DaveWirth Жыл бұрын

Yes we have a water softener after the filters. But i need to change the media inside, not sure if it's ever been changed and how well it's actually working.

@RoyRivas. 4 ай бұрын

Hi there, thanks you for the educational video, question is this system will take care the white residue from calcium and magnesium, my wife only cares about that , we are a happy bottle drinkers water …. Thanks in advance

@DaveWirth 4 ай бұрын

I think so. The house always had a softener, but since installing these filters, the calcium on the showers was a lot less. Still not completely gone, but maybe like 85% gone? Again, you can probably get away with just 1 of the small and 1 of the large filters.

@slefkovitz Жыл бұрын

David, do you recommend a carbon self-flushing whole house filter and a UV light

@DaveWirth Жыл бұрын

I've never used a UV light, so i don't know about that. I have installed a carbon 4.5"x10" cartridge in the Culligan filter. Didn't really notice a difference. Maybe good if your water has a smell to it.

@asfazrq 10 ай бұрын

did you use pex A or Pex B? Did you notice any decrease in flow with the water softener and Pex B installation? Would you recommend Pex A?

@DaveWirth 10 ай бұрын

Not sure, i bought whatever they had a Menards. A big 50 ft roll. No, didn't notice a decrease in flow. But this year i did install an iron air filter, and the water pressure is a little less.

@justin8894 3 ай бұрын

Water!

@doorymcfly3488 Жыл бұрын

What about the yarna electronic descaler! Did it Make a difference after 1 year?

@DaveWirth Жыл бұрын

Hard to tell. I would say probably not. Nothing noticeable

@jarnevanbec2886 4 ай бұрын

Just a curious question: why no rain water? What is the yearly precipitation/m2 and roof area? (filtration still needed off course, but no iron problems etc)

@Nidkidful 3 ай бұрын

The rain water would have issues with sediment, would need a large cistern, and a pump, plus something to manage bacteria growth. It can also be illegal in different states and cities.

@tealkerberus748 2 ай бұрын

You'll find in rural parts of Australia, most households don't have filtration on our rainwater unless a family member has a very fragile immune system. Yes there's probably things growing in our tanks, but even as a disabled person who catches colds and stuff pretty easily, I've never got sick from my rainwater tank. I'm drinking that water every day and my immune system knows what to expect and how to deal with it. As a general principle, if your location has enough precipitation to support agriculture, it has enough precipitation to support households using rainwater tanks. If you need more water than you're getting, you either use less water, or build another shed. There is no such thing as too many sheds on a farm!

@blackmass1082 6 ай бұрын

Why is it 2 different colours?

@Phuctrong90210 Жыл бұрын

If I already have water softener install, and want to install sprin down filter and Culligen WH. What sequence should I install these filters?

@DaveWirth Жыл бұрын

I put the spindown filter, then culligan, then softner

@MAGAMAN Жыл бұрын

I might have missed it, but I didn't see any water test results that show this system even does anything. Every full house water filter system I have ever seen professionally installed is much, much bigger.

@josemorales9249 Жыл бұрын

After adding all those filter how did the texture of the water change . Like when are you’re taking a shower . And you rings the soap and still feel like the soap is in your skin .

@DaveWirth Жыл бұрын

Not sure about the texture. We also have a water softener that's after the filters. The softener was at the house when we bought it, i added the filters to remove the rust. So if you have hard water, i don't think these would fix that.

@R_Barz Жыл бұрын

so I am abit confused, what is the difference between the $300-$500 whole house water filter system like ispring and the $3000 ones with those long cylinders??

@DaveWirth Жыл бұрын

I think in the next year or so, i might be going to the larger Air Injection Iron Filters, like this: amzn.to/3Sdb4rU The advantage to what i have - cheaper, smaller, can remove different things depending on the filter Disadvantage - need to spend $20 per month and time changing filters, doesn't get everything The advantage to the large filter - last 10 years, no maintenance, removes all the rust/iron Disadvantage - expensive I also have a water softener, but i think i need to change the media, cause it's been like a decade i think, and it's probably full of rust