If you want to see more content like this, be sure to like, subscribe and follow the tags below: IG - @progressionind Adrian E92 335i - @fin335n Rudy E36 M3 - @findingrudy Jeremy 370z - @myb.370z Jesse MK 7.5 GTI - @the_jesusmk7.5
Пікірлер: 52
@gabegarcia56953 жыл бұрын
Sick ass rollers 🔥 looking mint, keep it up yo! 🦾
@lovesautodetail2 жыл бұрын
Great production on this channel.
@ProgressionIndustries2 жыл бұрын
Much appreciated 💯🤝
@Biohdgamer Жыл бұрын
Weird question Do u run spigot rings on the alloys or not ?
@fabianmarquez15543 жыл бұрын
That camera quality is crispy my dudes 🤌
@ProgressionIndustries3 жыл бұрын
Thanks bro trying to make the clips as clean as possible 💯
@RRR-jd2oy2 жыл бұрын
Wow I see that SHO 7:05 don't mess with that.....sleeper!
@ProgressionIndustries2 жыл бұрын
E85 and bigger turbo in the spring 😈🤫
@paynewalton15112 жыл бұрын
what front splitter are you running?
@alexcamarena84112 жыл бұрын
Hey man dumb question but how do you not rub on the tab that joins the front bumper to the fender. I’m running these same wheels on my Mk7 but 8.5 +35 and that’s the only place I rub on
@ProgressionIndustries2 жыл бұрын
Yeah doesn’t rub at all, honestly might of just got lucky🙏🏻
@derrickzimny60152 жыл бұрын
Clean
@konstichaos23843 жыл бұрын
Hahahha did his brother ever say that he liked the weels? I love them tho, great vid.
@ProgressionIndustries3 жыл бұрын
Not in the video😂 he loves them though
@cefsky9811 ай бұрын
Clean. Whats the tire specs?
@solo5783 Жыл бұрын
what tires 🛞 are being paired with the rims? 😊
@noormir25732 жыл бұрын
any issue with rubbing or deprecation of handling due to being 18x9?
@ProgressionIndustries2 жыл бұрын
No it doesn’t rub, and it handles so much better “very sharp”!
@galforsortin1951 Жыл бұрын
19x9 would be Sick.
@jamessa08042 жыл бұрын
are the RPF1s 18x9 +35 offset? Also, were you able to put those on with no fender rolling?
@ProgressionIndustries2 жыл бұрын
18x9 235 40zr 18 Offset 35 Squared set up Should do fender screw mod.Eibach Lowering Springs, 034 Camber tops, Whiteline Lower control arms +2.5 caster. -2.5 front camber -2.8 rear camber. No rubbing
@jamessa08042 жыл бұрын
@@ProgressionIndustries haha thanks for the extra info...this really clears up everything now. I have a mk6 gti but I don't think I'll be able to fit that wheel on mine without doing some kind of fender mod other than the screw mod. Plus I think the mk7s have a bit more fender clearance
@jonasintia35172 жыл бұрын
@@ProgressionIndustries do you think a 245/40 tire would work also with this same setup?
@ProgressionIndustries2 жыл бұрын
I believe so, I used to run 245 40 r 18 with Rotiform RSE offset 45. It was a flush stance.
@IEatYouBabies2 жыл бұрын
@@ProgressionIndustries any rubbing in the front?
@jasonocampo5770 Жыл бұрын
Hopefully I get a reply back haha but are wobble bolts being used or hub adapters ?
@ProgressionIndustries Жыл бұрын
Hub adapters!
@dollaz55412 жыл бұрын
Bro stalled the gti 🤣
@ProgressionIndustries2 жыл бұрын
Bro I swear 🤣 can’t believe I caught that on the video
@chknater Жыл бұрын
Sup. Dope gti. What r ur wheel specs?
@derekescobar22922 жыл бұрын
Did you have to do the lug nut conversation?
@K03sport Жыл бұрын
...there are conical lug bolts so having to do a lug nut conversion isn't necessary. but going with the conical seat is necessary because that is what the enkeis have...if you swap wheels a lot, a stud conversion might be beneficial
@galforsortin1951 Жыл бұрын
that's the way to do it.....
@lsg_mk7r3522 жыл бұрын
What was the specs on the new wheels ?
@ProgressionIndustries2 жыл бұрын
18x9 235 40zr 18 Offset 35 Squared set up Should do fender screw mod.Eibach Lowering Springs, 034 Camber tops, Whiteline Lower control arms +2.5 caster. -2.5 front camber -2.8 rear camber. No rubbing
@vettedsin Жыл бұрын
is the face flat or curved out and what was the offset? i kinda dont want to go up to 9s or 9.5s if i dont have to.
@MrWolf2212 Жыл бұрын
To have flat face look you need 9inch wide Rpf1
@peeyo1002 жыл бұрын
Got a 18x9.5 et 35 on 235 tires coming in the mail. hopefully that bitch doesn’t rub I’m worried 😂😂
@ProgressionIndustries2 жыл бұрын
Fingers crossed 🤞🏼
@estefanosilva6931 Жыл бұрын
Hey man can I get an update on that setup? I'm looking at getting 18x9.5s for the rear of my mk7.5 and I'm worried about rubbing on suspension components.
@Ultraxfinance Жыл бұрын
Specs?
@Ultraxfinance Жыл бұрын
Specs
@wcarvalho48702 жыл бұрын
We need more info of stuff in the videos like the specs of the wheels and tires not about intro for videos..
@ProgressionIndustries2 жыл бұрын
Answered the specs on previous comments
@joselitodeleon76162 ай бұрын
Mine is APR A01 18x9 et 40 wheels Michelin PS5 size 245x40x18 on my MK7 mine is cleaner😁