CNC Dude's CNC Router Project: Water Cooled Spindle

CNC Dude's CNC Router Project: Water Cooled Spindle - Water Connections

Рет қаралды 2,827

5 ай бұрын

I am dying to get this spindle up and running and seeing it in action. But before we go there, it seems prudent to get the water cooling installation complete. This is actually rather easy, but in this video I go through some of the steps I took as well as some techniques you might find useful.
Affiliate Links (As an Amazon Associate I earn from qualifying purchases.):
RATTMMOTOR 2.2KW Water Cooled Spindle with 110V VFD: (amzn.to/3OaM7hi)
Polyurethane Pipe Tube Kit (amzn.to/491iCqP)
PC-100A AC Power Strip (amzn.to/48Z2y8J)

Пікірлер: 8

@JohnHoranzy 3 ай бұрын

I have a blockage inside my spindle and the Algorithm brought me here. I was watching gritting my teeth because I knew you forgot the nut. It is even worse when you forget the nut on flared brake line. 🙃 Thanks for posting!

@CNCDude 3 ай бұрын

Yikes! Yeah I can see where missing that nut can be quite the cringy experience. Reminder to not work on those ;-) Thanks for watching!

@ernsteliden6719 2 ай бұрын

When i am trying to fit these kinds of tubing and also pe tubing i dip the tube in hot/boiling water a few seconds that makes the tube soft but the risk af getting it to hot is very small. Great video😅

@CNCDude 2 ай бұрын

Wow, that did not cross my mind at all, but I will be sure to give it a try next time! Thanks for sharing and thanks for watching!

@DougSims 5 ай бұрын

I love your humor. Great video!

@CNCDude 5 ай бұрын

Thanks for the kudos and watching the video. Glad you enjoyed it!

@poco3xpro885 4 ай бұрын

Hello,may i know, why my water pump stop working suddenly,when i take out from water and wait few minutes then put it in the water then it working . Im confused why it stop Working

@CNCDude 4 ай бұрын

That sounds like some sort of thermal protection might be kicking in and you need for it to cool down before it can resume operation. Or maybe it has a leak and some water is coming in causing some sort of an intermittent short? It is hard to say for sure without seeing the actual device but those would be my first two guesses. They are kind of cheap implements, so it would not surprise me that your just needs replacing. Hope you can solve the issue soon!