PwnCNC Spindle Cooling Options

Рет қаралды 7,676

9 ай бұрын

Dust off a stool and enjoy a little discussion about liquid cooling options for our spindle kits or an add-on chiller for your current spindle kit. The CW-3000 chiller is not CNC manufacturer specific and can be utilized on almost every model of CNC that does not require active cooling with refrigeration. For that you may need a CW-5000 active chiller.
Facebook Business Page: / pwncnc
PwnCNC Users Group: / 2993800347512326
Instagram: / pwncnc
Here are links to all the cool stuff in this video
CW-3000DG Chiller: pwncnc.com/products/cw-3000?_...
PwnCNC Spindle Kit: pwncnc.com/products/spindle?_...
Silicone Coolant lines: pwncnc.com/products/clear-tub...
Superthane Ether Coolant Lines: pwncnc.com/products/clear-tub...
Poly Urethane Coolant Lines: pwncnc.com/products/clear-tub...
Onefinity Elite Woodworker: tinyurl.com/43nkjt24
Drag Chain Coolant Line Clips: www.etsy.com/listing/14228412...
#pwncnc #onefinity #cnc #cncrouter #masso #woodworker #3dcarving #dustboot #atc #atccncrouter #spindle #chiller #woodcarving #vcarve #shapeoko #cw3000 #cw5000 #co2laser #xcarve #shapeoko

Пікірлер: 30

@shoreshotarchery 9 ай бұрын

Great Video, Excited for your ATC for the Onefinity

@srmsrm3676 3 ай бұрын

Great information to have. I'm in Texas and even with a mini-split system my shop temperature can reach 84 degrees if I've been running the planer and dust collection for a while so I plan on using a remote reading thermometer in the 5 gallon pail and adding a freezer block to the bucket when necessary. Considering the RV anti-freeze for pump longevity as opposed to the methanol in the windshield washer fluid. Thanks for the tips.

@user-nh6pv1fb7x 9 ай бұрын

Kudos. I think it is great that you added this relatively inexpensive option for your water cooled spindles.

@scottvallie4495 9 ай бұрын

These guys are awesome, customer service is second to none Im so pleased to be using there products.... Now lets talk about the noise level of that chiller is it quite...

@ClintonCaraway-CNC 9 ай бұрын

Daniel actually experimented with changing out the fan for one with very expensive bearings and discovered it made absolutely no difference. The fan blowing over the coils can be heard but in comparison to a shop vacuum/dust collector (even mounted outside, in another room or in a cabinet) a bit cutting material or even the cnc when it is moving around the chiller will never be heard. It can be compared to the fan noise of the VFD-Enclosure when it kicks on... the chiller might be just a bit noisier but not by much.

@JCraftvfx Ай бұрын

I just bought your chiller, excited to actually use it. The smaller pump just wasnt doing it for me and would just stop pumping halfway through a job, I'm assuming it was just getting too hot, hopefully this fixes the problem

@johnforeman4393 9 ай бұрын

I created my own "chiller" with pc cooling components. I used a single 120mm fan and radiator and added a flow and temperature sensor to send alarms to masso. The best part is it's small and mounted to the conroller box. Total fluid capacity is about 24oz, works great.

@smawhorter 9 ай бұрын

THIS. So much easier, fairly inexpensive, and it's a closed loop that doesn't get sawdust in it.

@Mytagforhalo 8 ай бұрын

The other thing is that there are cheaper CW-3000 options available as well if you're willing to shop around. I recently purchased a brand new Vevor branded one for ~$120 on ebay including tax and shipping. Warehoused in NJ apparently. So it's something to keep in mind considering it's a turn-key solution. As far as I can tell on the insides, they're nearly identical to the S&A ones PwnCNC is selling. Trying to import it yourself on aliexpress definitely doesnt save you any money in this case.

@ClintonCaraway-CNC 9 ай бұрын

I am using the "Superthane Ether" with the Rowdy Roman cable chain clips and it works great. The first few hours of use it made the cable chains bow-up when there was movement but by the next day it relaxed and is now working flawlessly. I love that it is perfectly clear and you can see the water pumping through when the IoT Relay kicks on the pump.

@MitchellsWoodwork 9 ай бұрын

Lookin’ good, Daniel! 👍

@8thsinner 9 ай бұрын

Well my spindle kit shipped on monday so I will make do with the pump for now going into winter.

@mikelittlejohn3743 9 ай бұрын

I got a cw-5202 with dual devices i use 16- 20 celius for c02 laser should i use like 24-28 celius for spindle

@ClintonCaraway-CNC 9 ай бұрын

Can you run and regulate each at the same time? My co2 laser sets right beside my Elite. I might have to look into that if anything ever happens to my CW-5000 that came with my Thunder Laser.

@jasonbindseil7238 5 ай бұрын

Are you talking about using window washing fluid (Windex) or windsheild washer fluid (for a car)?

@PwnCNC 5 ай бұрын

for your car... far cheaper. Goal is to prevent any growths in the water and tank.

@pascalperrin-bonnet7119 2 ай бұрын

Bonjour, votre refroidisseur cw-3000 peut-il être alimenté au norme européen soit en 220 volts?

@PwnCNC 2 ай бұрын

Hello, unfortunately at this time we only offer the CW-3000 chillers in 110v. We will look further into having available stock for 220v.

@crescerdesigns 4 ай бұрын

I have a non climate controlled shop and sometimes it reaches up to 80 degrees Fahrenheit. Will the chiller do a better job than the regular pump to keep my spindle cool.

@PwnCNC 3 ай бұрын

The key with spindles is you want them running at or just above ambient temps. A CW-3000 chiller is great at keeping the spindle at ambient. If you use something like a CW-5000, you'll want to make sure the temp controls are set to ambient. Even as the ambient changes through out the day, the temp should be set to close to that.

@TinkeringJohn Ай бұрын

I have a 2.2kw spindle. The submersible pump that came with it is rated at 3200L/H which is 53L/M. The CW3000's on Amazon pump at 10L/M. Is the flow rate of the CW3000 sufficient for my spindle?

@PwnCNC Ай бұрын

Indeed it is. The chiller is more than sufficient for cooling the spindle during long carves.

@TinkeringJohn Ай бұрын

@@PwnCNC Thanks for the quick reply.

@rhilliard377 20 күн бұрын

what do you recommend for tube management?

@PwnCNC 20 күн бұрын

We're working on a few options but nothing has solidified just yet. Currently our recommendation is to look into RowdyRoman's tube-clips. They're decent. Another option we've found is UglyDog has a "larger cable chains" upgrade available which might work well, although i have no experience with either solution.

@ZER0o10 5 ай бұрын

does the chiller comes with warranty?

@PwnCNC 5 ай бұрын

The chiller has a 1-year Manufacturers warranty.

@ZER0o10 5 ай бұрын

@PwnCNC thank you, i live in Arizona and my garage gets pretty toasty. Still debating if this could be a good option for a 220v spindle i will be ordering from pwncnc.

@winandd8649 5 ай бұрын

Alright, this is an ad

@PwnCNC 3 ай бұрын

Yeah it definitely had that feel to it. We're trying to be more informative with our videos and more thought out so they don't feel ad-like. Regardless, this video does have some good info for those trying to decide which system they want to go with.