Great tutorial Yvan! And a great complement to the video we did together on my channel. You are an inspiration to all the detailing community and a tremendous source of knowledge! 💪🏻👍🏻

You are the best Yvan, thanks for your advice.

Great video I’ve been detailing professionally for about 15 years and I have learned that detailing always changes there’s always something new in this Industry that is why I love detailing because I always learn something new every day thanks for the great advice

Yvan I’m gonna be sticking around with you. I’ve subbed as well. You remind me of all the big channels when they first started out. Including Pan. You’re raw, you’re fresh and you care about the quality of your content. All these channels have got a little lost with what their customers (viewers) actually wanted. I hope to see you excel from here on out Yvan. Also - I love the shirt and bow tie combo. I really think you could incorporate the bow tie and glasses into an animation as an intro for your videos.

Love the how to videos Yvan! They’re my favorite.

Thank you very much, Yvan for sharing your knowledge with us.

Love your videos. So much to learn, even after 20 years of hobby detailing.

Another amazing video! Your a phenomenal teacher! There are so many tips and tricks i have been thankful to have picked up from you over the years and soon will be coating my car again......just was less than a week off to pick up the Roar coating as on Friday I just received my order for CQuartz UK3.0 and Gliss. Your a major inspiration and can not wait for the next video

Great explaination!👍 Love this video format and content 👌❤

Hi Yvan, both videos are great. Learning a lot. Thanks and keep it up and I keep watching.

That was a great video with Pan. Loving the content

Yvan - excellent video with loads of information. I’ve been a PTO subscriber for quite some time and loved seeing his new Porsche getting the top dog treatment by you and your wife… what an absolutely gorgeous car!! That’s when I subscribed to your channel. Keep up the wonderful content. 🙏

A wealth of information! Thank you. 👍

Thank you, Yvan! Pure gold as always. You have no idea how much I have learned from you. 95 was a glorious year for me, because I graduated high school that year! Played a lot of drums, and has an amazing girlfriend. Thanks for the memory jog!

Great video and tutorial IVAN. Came out amazing as always. B well

Beautiful, beautiful truck Yvan.

Ford should sponsor this video, beautiful specimen! Thanks for the content

The 1 hour cure and can be applied outside is very appealing. Thanks for sharing your knowledge

Great video, glad it came up in my wire

Oh Yvan Lacroix, couldn't be earlier since been with a lot of work at the office and had to be without my phone to concentrate better on the project at hand. I watched you and your wife Sylvie on Pan's video but this one definitely had more detailed information, amazing as always. 👌👍🙏

Beautiful results. High value service in both price & quality given to the customer. You can’t get anything this good at the car wash, with proper marketing my services will sell themselves!! Also, that’s a very capable, good lookin truck. Great choice to buy!

Great video. Hopefully you charged Pan $16k for the plug. 👍🏻

Here from Pan. Glad to learn from someone else in the business! If you respond to comments as much as Pan does, you will go far

@Yvan i am jealous of you , i wish i had a wife like yours. She is so professional at detailing cars (have seen her at Pan's videos) and seem to have a lot of experience. And i guess she likes cars in general. I have never tried myself to apply a Ceramic coating on my car , but the results on Pan's car are crazy. I have to get this product to Europe and test it. Wish you and your Wife the best!

Great video Yvan. Thank you! Any thoughts on 2-coat vs 1-coat products? Personally I'd take a little more challenging single layer installation over having to go around the vehicle twice with two cure times.

Beautiful truck and lots of good information on coatings in general. Where did you get the yellow foam applicator with the strap? That is such a useful tool!

Coming from pan channel to watch u now

Do you recommend installing all paint coatings with a foam applicator like you are using? I like the part about the circular motion keeping high spots to a minimum. Thanks!

Good One Yvan~!

this is great! Would you mind doing a ceramic coating maintenance/rejuvenation video as well?

Just ordered my first coating yesterday this was just in time

I have one question. Where can I buy such a foam applicator ? You're doing a great job ! I watch all your episodes and try to spread the word in Poland ! Greetings from Poland and good health to you and your wife !

Would the circular motion you use to apply the Roar base-coat also help limit high spots with other ceramic applications? Thank you for taking the time to post this content.

Good info and explainations! How does Roar's Polysilazane blend compare with the Silicon Carbide of Pan's last pro coating ?

Great supplemental video to the one you did for Pan! I purchased both products yesterday. I will be putting them on my 2021 Porsche 718 Spyder when it arrives in August. I plan on doing all Pan recommends when receiving a new car from the dealer, right up to the Car pro Eraser stage. I will then be having the car professionally polished and PPF applied to the complete front of the car and rocker panels. I will then prep it again for the Roar ceramic coating. Question; Can I apply 2 coats initially, then a coat of hardener? Cheers, Brent

What applicators do you use? Thanks for the great videos! Super helpful

Yvan... I know this is will sound like a confused car owner, but I installed ppf on my truck and had OptiCoat put on top of it 4 years ago and it has served me VERY well. I recently,purchased a car for my wife and it too has ppf. Has Roar been tested on ppf? Would you recommend it for ppf? Same with the hardener? Again, I fully understand this is not the everyday situation of combining ppf and coatings but it has worked very well for me. Thanks and so good to see you with Pan as I have now subscribed to your channel. You are a class act!

Good content as always. By chance, do you have a link for the coating you used and out of curiosity, why did you choose that particular coating?

Yvan, with this product you used the foam applicator and with a circular motion as recommended by the manufacturer. Many other brands have coached the crosshatch pattern when using a Microsuede applicator. From your experience does the chemistry of the product differences create the need for various methods? I do understand your comments on the start and stop as I do a crosshatch swipe.

Thanks for the tips yvan, for the prep wipe, i have a 32oz bottle, mix 1 part acetone and 2 parts windex correct?

Thank you for the content, you’ve definitely help all of us in the detail community. Question, in the video you can see that your pad is starting to darken due to the plastic and trim you wiped. Is it possible that the pad can leave defects on the paint?

Do you have to switch out applicator pads at all (during coatings and in between coating and hardner)? If so, how often and when. Also, how often do you switch out your towels when applying coating and hardner (or is it just one towel per each). Thank you again for all the hardwork and sharing your knowledge and experience.

TYVM. For your tips. Can you show the flash and high spot on video so we can see what to look for? Merci

Excellent Yvan .. Thank You .. can we coat single stage paint ?

Thanks for this great tutorial. Any authorized dealer in Texas for Roar Coating?

Great video Yvan! Just curious about the application method of coatings. Can all coatings be applied in circular motions or no? It just seems easier than the back and forth crosshatch method.

I personally leave the rubber and plastic trim to the end or at least before retiring the applicator/suede. Are there other tips in terms of panel sequencing etc?

Hi! I am a Pan the Organise fan and saw you on his channel. You seem an expert! I wonder if you can help- I have a black c300 with CarPro ceramic + gliss. After washing and final rinse with 0ppm water I notice small black ‘dots’ on my car appear after morning dew- only on horizontal surfaces- yesterday I used a leaf blower to dry the car but it started to rain and so I towel dried the rest of the car. Now the side I used the leaf blower had the small dots this morning - look like water marks - (they came off easily with ONR as I didn’t want them to stay in case they penetrated the coating as you said in your video) - could the leaf blower effect be the cause of this do you think? Any other ideas? Only happens after dew in the morning. Thanks bud!

I’ve just had some minor crash damage repaired. How long should I leave the new paint before applying a coating?

May I ask - do you recommend circular application for any ceramic or just for this one?

Is Mckees N-914 Rinsless Wash a compatible/appropriate method to wash a car coated with Roar? Thank you.

Thanks for this Video! I know my comment is a bit late but i just started engaging myself in detailing like 2weeks ago only. I have a question though regarding the circular application, im assuming that this method of application can be done with ceramic and graphene sprays right?

I had my brand new truck coated with Roar by my local installer and I picked it up two days ago. Since then HEAVY POLLEN has built up and it hasn't rained yet. Should I be concerned with the caked on pollen enough to do a "gentle" rinseless was as per your instructions before the first week has passed or is it OK to wait it out and jut let it build up. It is supposed to rain the day after next. In other words does high levels of built up pollen interfere with the curing process?

Yvan you and me are a lot alike lol I roll an old Jeep even though I have the money to buy something much nicer lol. My philosophy is love more so for experiences then things even though I work on nice cars all the time. I love your minimalist approach and the full time RV life. That’s exactly what I want to do, but my partner doesn’t like the idea for our kids even though I have showed her videos that it’s totally possible, she doesn’t think it is.

What are those applicator pads made of? Where can i get them?

Cher Yvan, excellent vidéo. Une question: si je souhaite appliquer l’enduit céramique sur la portion de la carrosserie se trouvant à l’intérieur des portes (contour intérieur de la porte), devrais-je le faire en même temps que je l’applique sur la carrosserie « extérieure » ou seulement après? Vas-tu généralement mettre le produit sur le contour intérieur de la porte? Merci! 🤩

Hi Does it have to be indoors or can i apply outside aswell?

Awesome video! Thank you so much!

Thanks for the call today! Getting close to the application. After I apply the hardner, how long is the pause before wiping off?

Is your tip of washing and reusing microfiber towels after applying a coating unique to Roar coatings or are you speaking as a general rule for all coatings?

Yvan, so much emphasis is placed on the painted exterior - I live in the rust belt and I’m kind of obsessed with keeping rust from forming on the undercarriage and frame of my Tacoma. Any plans for a video on this topic? I’ve been using fluid film and such. I hate the idea of Pan driving that 911 beauty in salt. Or, any car for that matter. 😉

O know the foam applicator comes with the roar coating. Is there a similar applicator that we can purchase for use with other coatings? I'm about to do my first coating and would like to do your circular method with a foam applicator. My coating came with the block and sheets.

I appreciate your knowledge, but this tutorial left me with several questions...

I have a question, I recently ordered a coating for my personal vehicle, the coating was set to arrive on Friday but apparently got lost in the mail but before I knew this I went through the prep process wash, decontamination, clay, polish, and panel wipe etc. well now the coating will not arrive till later this week and the vehicle has to be driven daily until it does arrive. My question is what should I do before applying the coating Thursday, just wash, dry, panel wipe and coat? Any help and advice is appreciated. Oh yeah and it’s supposed to rain for the next 4 days so the vehicle will be filthy!

what causes Mag wheel peel? Of the clear coating on a Mag wheel. In the inset areas of the wheel

I mention that when you coat the trim and the rubbers, the applicator turns black. Is there o problem with this;

Yvan, what is your recommendation for pricing a coating? One year, Three year, Five Year, etc.

Yvan the superhero

Is using a rinseless wash a good way to start the preparation to applying Graphene. Also which way is the best way to apply the grapheme? Crosshatch or circler like applying a paste wax?

J’adore mettre un coating en motion circulaire !!! Ce produit à l’air fantastique . L’application que tu as fais avec ta femme sur l’auto de Pan me donnait l’eau à la bouche 🤩Ayant déjà utilisé le gloss coat sur mon vus ... malheureusement quelqu’un a pensé faire un bon acte et laver mon véhicule lors d’un entretien 🙄 Je dois tout le repolir... as tu un produit à me suggérer moins dispendieux que Roar? Merci pour tous ces astuces que tu nous partage Yvan!

Any coating can be applied circular motion?

Hi Yvan How can I remove industrail fall out from my coated vehicle?

Question: Est-ce que c’est adéquat pour un ppf avec fini satiné?

Hello Yvan. Do you think they can send it to Europe?

Where Is Roar available ?

Can you use a microfiber round like applying wax?

Shiney F250. Do the cruiser now...lol

That coating had better be worth every penny of the $500 someone pays. Jesus.

Good afternoon Yvan could you call me to become and installer in pr could you help me w this w the roar ceramic coating thanks William from extreme optimum auto detailing pr

I’d rather the raptor over the Porsche anyway lol...