robert vidal now that I’ve listened to the video again your right... I really over “buttoned” it!!!!

David Eb no problem buddy glad you got it worked out!

👍🏻👍🏻

+Greg Livorsi Amen brother!! Glad you got it done!

Thanks Kevin, i never noticed that about the audio.

+Fabulous Finds No problem, thanks for watching!

No problem Kawan and Thank YOU...for watching, hope it helped.

Greg Stinogel absolutely, even if you only had a single button remote, you could program the same remote to two different locations.

I would venture to say yes, although i’d make sure you don’t have any other LED bulbs on in or in front of the garage.

from what i remember the magic number was 6 depending on the color of your program button.

@@ALLProGarageDoors Thank you for your answer. My button is purple

@@alainvu6532 if it’s purple then It should hold no less than 6

Push the green button once then push the remote once. Chances are pretty good that your old machine won't pick up the remote. That's the first thing that goes bad on these old machines

to clear the memory you hold down the program button until the LED light goes out. then all remotes are cleared.

If your memory doesn’t clear by holding it down then the memory portion of the circuit board has gone bad. depending on the year your opener was made you might be able to add an 889 LM and get new updated remotes. if your opener is older than 99 then that wont work, you’ll have to go with a 635 LM or 365LM to match your existing remotes. sounds difficult but its easy.

Thanks!!

No the old remotes are not inoperable yet. First step is to push and hold the red button down until the LED goes out. Now try one of your remotes, if it doesn't work then you have succeeded in erasing the memory and all remotes. Now just follow this video and re enter the remotes you still have.

I'd start over, clear the memory and then program the remotes.

@@ALLProGarageDoors That's what I'm figuring on doing! Thanks for the reply!

you’ll have to look online we don’t have any of the older stuff anymore.

no the wallbutton goes to terminals #1 and 2, the safety eyes go to 2 and 3

try a battery first

no…i didn’t even know genie had a universal keypad.

Phalken Wilson what model remote did you buy and what color program button do you have?

Mine didn’t work either, my button is red and my remote is 953ESTD model

You can't, older machines can barely work the way they should much less be useable thru your phone. Either you'll have to try a universal remote or get a new machine that has wifi so you can use your phone. learn buttons came into play in the mid 90s so if your machine doesn't have one then it's probably early 90s or older.

Try unplugging the machine, then depress the button and plug it back in and hold it for roughly 25 seconds if that doesn't do it then I need to know the model of your remotes

Willa Castillo.....The machine is telling you that the battery back up is dead, take the lens cover loose and you will see a door there...unscrew the single screw at the bottom, remove the door and unplug the battery. Battery back ups are a nice option but the machine does not require it to operate.

Eric Young Once you know where the program button is, it's actually beyond simple and it's a good secure system. Glad to be of assistance Eric!

look at the color of your program button if it's a chamberlain brand machine then buy the chamberlain universal remote... or... buy a chamberlain "max" remote. the max will program to all chamberlains and so will the universal, the universal will also do other brands.

Thanks D Lane! hope it helped you out!!

Take a picture of the new remotes, then take a picture of the old remote and email them to info@allproqgd.com and one of the guys in the shop can email you back, or call Langdon at 858-576-7223 and he can go thru it with you over the phone.

It was, yes. easier to test customers remotes on a common frequency

just hold the memory button down until the LED light (next to the memory button) goes out. then the memory is clear.

+Bernie Flores How new Bernie? if it's got a yellow button, (which the new ones have) then push that yellow button once then the remote once, if you don't see a yellow button or it's not programming then just double check your wall console to be sure the "Learn" button isn't located there instead of on the machine.

Indeed!! 👍🏽

You’ll either need a new receiver, new circuit board or new machine.

Joanne Bowman sometimes the program button stops working.

Yea they do that when they get too old.

does bidens son smoke crack?