COMBI BOILER PLATE HEAT EXCHANGER REPLACEMENT FOR HOT WATER

Рет қаралды 44,496

3 жыл бұрын

Today I show you hot to replace a combi boiler plate heat exchanger plus go through the plumber thought processes and tests to prove it had failed.
So this plate heat exchanger has failed because the pressure of the boiler kept rising, indicating that the separation between hot water and heating system water had been compromised. This can only really happen in the heat exchanger. So I'll show you a few tests I've done to prove it. Then change the heat exchanger, then take the old one back to the shed to cut it in half and prove it. I'll also talk about descaling if your hot water pressure has got low.
🚀 LEARN PLUMBING ONLINE IN MY STRUCTURED COURSE (50% Before March): www.learnplumbingonline.com
🛠 AMAZON TOOL STORE: www.amazon.co.uk/shop/plumberp...
🥾 10% Off my workboots + workwear Use Plumberparts10: www.bigboots.co.uk/discount/p...
👓 10% Off Safestyle Sunglasses Use PLUMBER10: safestyle.com.au/?ref=PLUMBER10
Learn Plumbing Online is perfect for future apprentices, homeowners who want to understand and tackle more plumbing jobs in the home, handymen who keep turning down the odd plumbing job and more. With practical follow along video lessons and discussion board you can boost your knowledge in my amazing trade. Sign up now: wwwlearnplumbingonline.com
TWITTER🐤 / plumberparts 🔥
FACEBOOK👉 / plumberparts 🔥
INSTAGRAM📷 / plumberparts 🔥
SNAPCHAT👻 / plumberparts 🔥
-----
PLUMBERS REGISTER HERE: www.plumberparts.co.uk/tell-me... ❤️
#plumbingadvice #plumbing #combiboiler #heatexchanger

Пікірлер: 96

@plumberparts 3 жыл бұрын

*_COMMENT BELOW. I'll answer them in the next comments video!_* 👕 *MERCH STORE* shop.spreadshirt.co.uk/plumberparts-shop/ 🍺 *JOIN THE* Alearmy *_Exclusive weekly live videos on Thursday_* : kzfaq.infojoin 🛠 *GET YOUR WET VAC ON AMAZON HERE* www.amazon.co.uk/shop/plumberparts 📺 *VLOG CHANNEL:* kzfaq.info

@ashvanbro9329 3 жыл бұрын

Great work my good friend have a good weekend mate

@pacman4568 6 ай бұрын

You must be the only plumber in the world who would do this. Every plumber everywhere would recommend a new boiler.

@plumberparts 6 ай бұрын

Haha! Thanks man.

@TurinTuramber 3 жыл бұрын

Take a sip of tea everytime he says pressure vessel instead of heat exchanger. ☕😄

@dimitar4y 3 жыл бұрын

"why I think it's failed" > pans to image of EXTREME CORROSION

@MrRyanLofty 3 жыл бұрын

I live for these video uploads cheers James 👌

@saronygmail 3 жыл бұрын

Nice job with the expansion vessel

@EquilibriaHealth 2 жыл бұрын

Nice one, just what I needed right now! Thank you good man

@neilbissett1240 3 жыл бұрын

Great video mate😎

@jaffplumbs26 3 жыл бұрын

Great video as always mate, u just got a gift for being funny and educational at the same time which isn’t easy to do “Might be lucky and go in both holes” 🤣🤣👌👏👏

@GeorgeCox 3 жыл бұрын

11:57 "expansion vessel" :-)

@Brunosdad 3 жыл бұрын

Nice one Mr Colin Furze, I don't know what you made but I liked it.

@abcxyz820 3 жыл бұрын

🤣

@chrisgunn121 3 жыл бұрын

Thanks Jimmy, great video and Boi Dat Hoodie is Proper Bo I tell thee!

@davidlax9454 3 жыл бұрын

Drop em in a sonic bath for a few hours amazing what comes out !!

@C4sp3r123 3 жыл бұрын

A video on external boilers would be good. Would have thought they are prone to many more issues being exposed to the British elements, but must be a reason or two why you would have them. Interesting video, especially seeing it cut open!

@robfox5586 3 жыл бұрын

BIG Thank you for the video...!! Had to carry-out exactly this on our Retro Exertnal 2008 Grant Vortex 21 in deepest darkest North Cornwall.... FYI try some St.Austell Ale "Hicks"... In fact I'll buy you one should you ever venture near the North Kernow Coast. 👍

@daves4026 3 жыл бұрын

Great video

@davidt1955 3 жыл бұрын

Good tips for pressure testing the expansion vessel😀

@davidt1955 3 жыл бұрын

Sorry I wrote that before hearing the song at the end. Great Vid James👍

@k20aa 3 жыл бұрын

Grant have change those washers now much easier to fit

@skipup5083 3 жыл бұрын

I'm surprised the new plate exchanger didn't come with new top hat washers ? direct from Grant

@richardpope2114 11 ай бұрын

Spot on

@dadiomofo 3 жыл бұрын

Brave man using the boiler isolation valve's

@meuk6929 3 жыл бұрын

a fine tip felt pen works if your phone isnt handy for marking the pressure gauge

@gmeadowcroft84 3 жыл бұрын

Great vid and very interesting James, I have never seen inside of a car radiator but I imagine it’s a very similar method. Great to see inside he though as it gives you a good understanding of how it works. SEND

@plumberparts 3 жыл бұрын

I love the fact the Ale Army use ‘Send’ mate!

@user-lu8vq2qd9c 2 жыл бұрын

@@plumberparts £100, how much is parts? And how much labour?

@train4905 Жыл бұрын

A most exellent video sir,spit on

@thekingmezz4320 3 жыл бұрын

I like your videos

@syncrosimon 3 жыл бұрын

Thank you👍👍🇬🇧😎

@Kilmoveebee 3 жыл бұрын

Question? I have oil fired central heating with a water cylinder for hot water it is time for me to renew the boiler it is about 25 years old now. Would you advise getting a Combi Boiler instead of using a hot water cylinder, in the summer I have to use the emersion to heat the water. Are Combi Boilers Reliable?? Robert

@richardking6066 3 жыл бұрын

Re limescale: I'm planning to put a couple of isolated tee's below my combi boiler, so I can flush it through with vinegar every year or so - without having to dismantle anything, or wait until it actually starts to give up the ghost...

@myopinion3398 3 жыл бұрын

If you have the space under the boiler, have a look at the scale reducers, basically look like a chrome pipe section. They do them pretty much anywhere including Screwfix

@robertwatsonbath 3 жыл бұрын

Thanks James. I was today years old when I realised external boilers were a thing.

@myopinion3398 3 жыл бұрын

Yeah, you can get Rinnai water heaters on gas that can be externally fitted...they kind of look like a mix between the tankard build and balanced flue terminal

@dimitar4y 3 жыл бұрын

People who complain about a £100 heat exchanger, I need to ask them to make it themselves and see it really should cost way more :)

@MrMadSue 3 жыл бұрын

One good vid

@davidb2464 3 жыл бұрын

Yet another great video. Just wondering why you wouldn't give the system a flush, or at least a full drain down, then refill? It does look like the system is fairly dirty. But I would bow to your greater knowledge if you can show a newby why you didn't drain down, or was it just to get the PHE changed? Looking forward to your comment(s). Thanks in advance.

@ratgreen Жыл бұрын

How do you re fill the heater store tank / loop (the larger hoses coming off the h/e)?

@andydawson2070 Жыл бұрын

Great video, I have a combination boiler and the heat exchanger is only about a third of the depth of the one you took off, it's rated at 21-27kw. I would like to install a bigger heat exchanger, I have room in the cabinet. Flow rate at the hot tap is poor at best and I'm thinking that a larger heat exchanger would help to improve flow rate. What do you think. Andy.

@BinarySecond 3 жыл бұрын

Charlie sent me!

@Kilmoveebee 3 жыл бұрын

Enjoy your Pint (Pints) of Ale.😂😂😂😂

@AcheForWake 3 жыл бұрын

Really really informative video for a D.I.Y-eeeer. Not a job I would tackle as I have a reliable plumper, but have spotted a crud build up on the connections in and out. Also a few times a year the pressure drops, but we can go months and months (March-August) without any pressure drops. Are there any failure modes on these exchanger that can result in pressure drop? We have checked all the usual things (leaks etc). I have the same Grant boiler as the one you have shown, but installed in the house. Love the effort and production quality you put into your videos - you deserve all the success mate!

@markdenney3333 3 жыл бұрын

Probably losing pressure from an auto air vent if no other leaks

@AcheForWake 3 жыл бұрын

@@markdenney3333 thank you for replying - no other leaks detected (I’ve had floor boards up, etc). All the best.

@nixonsmateruby1 6 ай бұрын

If a ceramic heating element is placed on the heat exchanger would it heat the heating and then not have to use gas?

@sherifadawda455 Жыл бұрын

The hot water on my kitchen and bathroom taps runs for few seconds and goes cold but the hot water on my shower works fine. What might be the cause?

@rognevs5695 3 жыл бұрын

Every grant in the world that’s over 3 years has leaking fittings on the heat ex 😂, Another note on these boiler nearly all installs will have undersized vessels and this puts so much stress on all joints and Auto air vents

@gallops4u 9 ай бұрын

Sorry just a quick one if if any one in the No is looking If my pressure is rising Would I need a new heat exchanger or if I got it of and cleaned it would that work for a while until I got a plumber to put a new one on iv had it half of but can’t undo a blooming nut thank you 🙈👍

@David-zf5ex Жыл бұрын

Used to work on the oil boilers, too many washers on them nowadays, drip drip drip, bring back the mysons lol

@plumberparts Жыл бұрын

Old school!

@heco3451 3 жыл бұрын

What type of metal is inside of heat exchanger, someone?

@shavenhaven6869 3 жыл бұрын

He changed probably the easiest plate heat exchanger on the planet.

@chrisfrancis535 3 жыл бұрын

Have you changed one before? They are not as easy they look

@andrew5860 Жыл бұрын

Didn’t catch name of your other YT Chanel, can you provide a link please?

@gadgetman36 3 жыл бұрын

What are the pros and cons of an external combi boiler?

@myopinion3398 3 жыл бұрын

Pro :possibly less noise (depending on location) and smell and more space for the customer. Ventilation automaticity provided just make sure some nutter doesn’t build a shelter over it, always fit to MIs. Cons: we live in Britain, you gonna get piss wet for any maintenance calls if it isn’t good weather, not to mention servicing in the winter.

@soyabean911 3 жыл бұрын

Lovely jubby, why have you got a cement mixer in your garage? Are you a builder on the weekend? Hold tight!

@johnsmith-ik8il 2 жыл бұрын

I have had a glow worm combi boiler installed recently only months old and when it's running on the thermostat and the boiler calls for gas and stops calling for gas there is a clicking noise that's getting a lot louder. I don't know much about boilers but believe that it could be the heat exchange. Any advice would be much appreciated.

@rupertjeffries2468 2 жыл бұрын

Does your hot water work still, the clicking will be the boiler trying to ignite, if your hot water isn't working either then I would say that the gas isn't getting there somehow, had a similar problem on my boiler, hope that helps 👍

@daves4026 3 жыл бұрын

What about crossover in the diverter valve

@davidlax9454 3 жыл бұрын

Same water same pressure !!

@karlkross2879 3 жыл бұрын

you mean heat exchanger James lol

@Keeping_IT_Simple 3 жыл бұрын

Forgive the possible stupid question but why would you have an external fitted boiler ? Wouldn't exposure to elements cause lessened efficiency & increased maintenance / replacement parts costs & frequency?

@TurinTuramber 3 жыл бұрын

Judging by the ease if access, a plumber talked them into it.

@AcheForWake 3 жыл бұрын

Oil fired boulders are big units, about the same size of a washing machine/cooker (60cm deep etc), so some homes simply do not have the space, ours is located in our hall way/entrance. I will be relocating, Into the garage (other side of the wall), once the garage is built.

@Keeping_IT_Simple 3 жыл бұрын

@@AcheForWake thanks for that ... Sorry assumed it was a gas fired boiler ....

@gallops4u 9 ай бұрын

How do I drain the hot water out of the vessel which is beside the boiler iv connected hose at the bottom and opened it ,,, and opened the taps inside the house but no water drains out 🙈 plus iv got a nut on the heat exchanger which won’t move one minuscule probably no one will see this but will check in the morning btw this is the only vid on the entire net that’s made any cense Hope this make cense 🙈 Bonjour 👍💯

@spartacus09ful 2 жыл бұрын

@plumberparts what would be the issue if my combi boiler doesn't fire up turning hot taps on? I have hot water if I turn the heating on but not otherwise. I was thinking diverter valve but not sure that would cause the boiler not to fire up on request. Cheers

@MrCODGLITCHER1234 2 жыл бұрын

Be likely the diverter valve or hall sensor. The hall sensor detects flow (tap being opened) which signals the diverter valve to shift across to hot water.

@spartacus09ful 2 жыл бұрын

@@MrCODGLITCHER1234 Cheers dude, it was indeed the divertor valve, just rebuilt the insides and all good.

@gadgetman36 3 жыл бұрын

What’s the difference between a heat exchanger and an expansion vessel?

@benduker6839 3 жыл бұрын

A heat ex transfers the heat from the heating side to heat up the hot water. An expansion vessel takes up the expansion when the heating circuit heats up and there’s an increase in pressure. As it cools and contracts the pressure returns back to normal.

@TheJask101 Жыл бұрын

How do you join the ale army?

@GaryB007 3 жыл бұрын

Great informative vid, but please lose that annoying guitar music.

@mickyork41 3 жыл бұрын

I like annoying guitar??

@SuperWayneyb 3 жыл бұрын

👍🤓👍

@davidlax9454 3 жыл бұрын

Expansion vessel lol !! Slow the commentary down ☺

@GG-me6fg 2 жыл бұрын

You need some bronze telfon hat washers ! Instead of the fibre washers.

@UberAlphaSirus 3 жыл бұрын

2 holes if your lucky, lol

@mikechivers5792 3 жыл бұрын

First yay!!!🤯🤣

@christopherwoodhouse7286 3 жыл бұрын

Dont you just love the pump design on them grants 🙄

@plumberparts 3 жыл бұрын

Personally I advise against having any combi boiler ever...but especially an oil one!

@christopherwoodhouse7286 3 жыл бұрын

@@plumberparts worked mainly on oil for 5 year before i started my own business and the cursing involved with parts like that being changed 😂

@julianhawker7672 3 жыл бұрын

@@plumberparts I hate combis too but they are my biggest earner on breakdowns. Top tip for you carry some clingfilm for covering pumps/components etc, works for me ;-)

@plumberparts 3 жыл бұрын

That’s a great idea!

@1922johnboy 3 жыл бұрын

Algorithms!!

@ricardopelc-wesoly3483 Жыл бұрын

Shouldn't you drop the pressure out of the system before commencing.

@JayGasEssex Жыл бұрын

He did... through the PRV (shouldn't really do it through prv though.)

@matthewpaulwark3251 3 жыл бұрын

i took my t shirt in the sunshine and see my hairy armpits and put my hands in my pockets in my jeans i lay on the floor with my feet cross

@matthewpaulwark3251 3 жыл бұрын

i just love walking in the countryside with my t shirt off see my lovely tummy and belly button

@matthewpaulwark3251 3 жыл бұрын

i like your new t shirt i wear jeans and trainers i will just love taking off my t shirt to show my hairy belly button and my tummy and my armpits i put my feet cross i put my hands in mu pockets in my jeans and i can hear my washing machine spin when the washing machine stopped i took out my washing and put my clothes in tumble dryer i took my clothes up i put them away in my chest draws then i put nice fresh clothes nice jeans and boxers and socks and i went outside it's was very warm i took off my t shirt to show my hairy belly button and my tummy and my hairy nipples then came home i put my feet and relax i just start cooking my tea and then wash up my dishes i put them away in the cupbroad and i took off my t shirt i put arms above my head see my hairy armpits and my hairy nipples and i stick out my lovely tounge