Common Errors & Quick Fixes

Common Errors & Quick Fixes | Skyjack 3219

Рет қаралды 91,227

Күн бұрын

In this video our Rental Equipment Shop Technician, Nick Chaney addresses some common errors & quick fixes you might encounter when working with our 3219 Skyjack lift! If you're still experiencing technical issues please contact our service department, we would be happy to assist you!

Пікірлер: 14

@rickanthony8259 Жыл бұрын

I just bought my S 1930 It did not go all the way up. Your video showed that there was a sensor. I re adjusted the sensor and now works fine! Thank you so much you are awesome!

@cwp2580 2 жыл бұрын

This helped me today with the safety valve at the front. Machine went up slower than blackstrap molasses... turned that sonb1tch and she went up so fast

@cassijoanna 2 жыл бұрын

We have a SJ 8243 and it seems that third speed or the fastest one anyway doesn't always engage but I know it does works. Not sure if its a pump thing or a wire thing. I will got from a slower speed to a faster speed just not the fastest.

@austinreeves5221 2 жыл бұрын

JLG wont drive while being more than 5-6 feet up. Broken pothole sensor?

@bugadaozoneff809 11 ай бұрын

Olá, tudo bem! Estou com uma PTA dessa mesma marca, não está funcionando liga mais fica na inércia o que pode ser?

@marcodm Жыл бұрын

How do I increase working weight limit?

@chosenone1004 2 жыл бұрын

I’ve literally used these type of lifts a thousand times . But for the first time today I had a life that everything was in reverse . Forward control made it drive backwards with backwards going forward . Left went right and right went left . I’ve never had a a issue like this . Any idea what is causing that ? Do you know if there’s some type of switch to change this ? Thanks for your help

@austinreeves5221 2 жыл бұрын

that has to be a switch or you just think everything is backwards. unless someone manually changed it

@richardarredondo9311 3 жыл бұрын

I have a scissor lift sj19’ , when going down one pothole protector doesn’t retract all the way

@Superthecod Жыл бұрын

Kick it

@user-kj8jh7rc2e 9 ай бұрын

We have a SJ3 3219 We can’t use it long enough because its get battery dead in just 10-15mins driving/maneuvering it.. we already did change the battery but still happening anyone has a same problem with mine? Let me know how you fix it

@terrytowelling6212 7 ай бұрын

Does anyone know how to turn the beeper off or down?! 😭

@Ozzy2341 9 ай бұрын

My SJ111 3219 doesnt have slow speed, it seems really fast and jerks forward and backwards. Does anyone know the problem?

@ham_7884 8 ай бұрын

I've had two 1999 hydraulic drive SJIII3219's and both of them had a low and high speed switch. However, it didn't do anything and would always drive fast (very rough and hard to control in tight spaces). In fact it was so bad that one of the motor/wheel housings cracked and broke right off the chassis from jerking back and forth so much over time :( is this normal? Surely it should have two different speeds if there is a switch for it. anyone know if this is a common issue, and how to fix it?