Compare Wireless Network Technologies

No video

Compare Wireless Network Technologies | A+ CertMaster Labs

Рет қаралды 1,777

10 ай бұрын

You are working as an IT technician for the managed service provider (MSP) 515support. One of 515support's clients is the company Structureality, a virtual architecture design company who make digital models of building and furniture for virtual worlds. 515support is designing a network that will allow employees to connect to a LAN and also allow guests to connect to the Internet via a captive portal. This network is being modelled as a GNS3 project prior to deployment.
To complete this lab, make sure that the GNS3 model is fully configured and test that it establishes the expected connectivity.
This activity is designed to test your understanding of and ability to apply content examples in the following CompTIA A+ Core 1 objective:
2.3 Compare and contrast protocols for wireless networking.

Пікірлер: 17

@katofhyrule12 4 ай бұрын

Thank you!

@JarrelRivera 4 ай бұрын

Thanks for watching!

@michaeljimenez7283 10 ай бұрын

great personality! Im studying for A+ and doing the Comptia labs thank you!

@JarrelRivera 10 ай бұрын

Thanks for the feedback. I'm glad that you liked the videos.

@disturbed4everluke 28 күн бұрын

quick question! you say at 7:00 that ap1 and ap2 are on different networks, and that makes sense, but for a class a address only the first 8 bits are the network address yes? so shouldn't 10.1.0.2 and 10.254.0.2 be on the same network? because they have identical network addresses? just the 10. part? the first octet? thanks for the videos!

@JarrelRivera 27 күн бұрын

Thanks for the query. If classful addressing is used (class A - 255.0.0.0) then 10.1.02 and 10.254.0.2 are indeed in the same network. In this laboratory, my assumption was that variable-length subnet masks are used because for routers and firewalls, their interfaces need to be in different networks, especially for internet and guest networks. Such that, 10.1.0.2 (internal LAN) and 10.254.0.2 (guest) are on different networks. I hope this clarifies.

@disturbed4everluke 27 күн бұрын

@@JarrelRivera ah thank you! i didn't think about it not having a straight /8 notation. if i'm understanding correctly, since the two addresses are on different vlans, they are segmented, they could both have the same network bits and not be on the same local network? or is the subnet mask actually different meaning they still do have a different network id, it's just a /7 for example instead of a /8?

@JarrelRivera 27 күн бұрын

@@disturbed4everluke Each subnet would be on different networks. For the laboratory, it is possible that they might be on /16 hence, 10.0.01 and 10.254.0.1 are on different networks. The use of different subnet mask, as compared to the typical masks for each IP address class is known as classless addressing. I hope this helps.

@disturbed4everluke 25 күн бұрын

@@JarrelRivera thank you! i've been liking all of your videos i hope you get the attention you deserve.

@JarrelRivera 25 күн бұрын

@@disturbed4everluke thank you! I appreciate it. 😊

@aaliyahsworldxd9352 3 ай бұрын

My drop-down menu looks different. Where you have "Wi-Fi Not Connected" mine says "Wired connected." So I'm not sure how to proceed.

@aaliyahsworldxd9352 3 ай бұрын

I found my error! I was looking in the remote desk top viewer but was not inside of LAPTOP1. I have the correct drop down now. This has been so helpful, thank you.

@JarrelRivera 3 ай бұрын

@@aaliyahsworldxd9352 I'm glad to hear that it is all sorted out now. :)

@Silentunknow5 10 ай бұрын

Hello this was great!!! Do you know when part 2 will be uploaded?

@JarrelRivera 10 ай бұрын

Thanks for watching! Part 2 is now available. 😊

@latriceakins2056 8 ай бұрын

Hi I am taking A+ in cyber security and your video have been a wonderful help. I wanted to know what name i syour very first video. I want to start from the beginning.

@JarrelRivera 8 ай бұрын

I'm glad you liked the video. You may want to check the full playlist that I got for A+ Labs.