PLEASE SUBSCRIBE
We are excited to continue this series of featuring the variety of adjustments on all of our chairs and today we look at Steelcase's V1 Leap Chair.
Table of contents
0:00 Intro
0:25 Height adjustment
0:56 Seat slider adjustment
1:21 Front edge angle adjustment
2:10 Variable stop tilt lock adjustment
3:55 Arm adjustment
4:32 Lower back firmness adjustment
5:12 Lumbar Adjustment
5:34 Final remarks
6:04 Bloopers
Adjustment Breakdown
Height Adjustment
1. Pull height adjustment lever up to move the chair up or down to whichever position fits you best
Seat Slider Adjustment
1. While standing on the right side of the chair Lift up the furthest lever underneath the seat and pull the seat away from the back or towards the back to fit your preference.
Front Edge Angle Adjustment
1. While sitting or standing to tilt the front edge of your leap pull the lever up on the left side of the chair while sitting and push down on the front edge of chair and release the lever to set the position where it feels most comfortable.
Variable Stop Tilt Lock Adjustments
There is a total of 5 different position settings for this lever. Moving it down increases your recline ability and all the up is the back lock which has some give but not allot.
Lean Back Tension Adjustment
Rotating the knob located near the same location as the variable tilt lock adjustment, rotate the knob clockwise to increase the tension when reclining and counter clockwise when you want to decrease the tension while reclining.
Arm Adjustments
1. Each arm has its own button underneath the arm pad, press this to change the height of each arm for the best comfortability.
2. The fully adjustable arms is an add on to the chair and may not be included in the chair you purchase. The 4d arms can swivel side to side and Pivot side to side for best fit.
Lower Back Firmness Adjustment
1. Locate the knob on the right hand side by the back lumbar while sitting turn the knob clockwise to increase the firmness of the lumbar and counter clockwise the decrease the firmness of the lumbar.
Lumbar Adjustment
1. The chair has a pad that is fixed into the seat and is not removable. The lumbar can be moved by placing a hand on each side and moving it up and down.
Note: The lumbar in the lowest point is a neutral position and does not effect the back in this position.
Crandall Office Furniture has been remanufacturing Steelcase & Herman Miller office chairs since 2002, and since then has grown to become the largest remanufacturer of high-end office seating in the United States. We see and work on thousands of these chairs every year, which gives us a unique insight into how they stand up to long term use, where they fail, and how to fix them. If you're looking to learn more about high end seating, you're in the right place!
► Learn More About our Remanufactured & Refurbished Chairs and our company at: www.crandalloffice.com/