Complete Guide to Unboxing and Assembling the Vortex Rotary Axis

Рет қаралды 7,502

Күн бұрын

Welcome to our comprehensive Vortex Rotary Axis assembly guide. In the following video, we'll guide you through the gratifying journey of unboxing and precisely assembling your very own Vortex Rotary Axis. Let's enthusiastically delve in, ensuring your Vortex Rotary Axis is primed and poised for optimal performance!
Chapters:
0:00 Introduction
0:46 Unboxing
3:25 Assembly Time!
3:48 Headstock Assembly
7:29 Belt and tensioning
9:50 Chuck
14:10 Limit Switch
18:08 Front and Rear Covers
20:07 Tailstock Assembly
25:50 Mounting Headstock on Track
27:12 Mounting Tailstock on Track
28:48 Track Ends
31:20 Wiring
39:02 Outro
For written instructions, visit our Vortex unboxing/assembly page: resources.sienci.com/view/vx-...
Order your Vortex Rotary Axis here:
sienci.com/product/vortex-rot...
We're here to assist you every step of the way during your Vortex assembly. Should you encounter any specific challenges, please don't hesitate to share them with us. Your feedback is invaluable as we continually strive to enhance the assembly process and ensure your experience is nothing short of exceptional.
▸RESOURCES
JOIN US
▸ Sienci Community | forum.sienci.com/
▸ Facebook Group | / mill.one
▸ Instagram | / siencilabs
Hashtags:
#siencilabs #longmill #vortex #vortexrotaryaxis #rotaryaxis #cnc #milling #unboxing #assembly #guide

Пікірлер: 14

@herbertliedel7019 11 ай бұрын

Put most of mine together last night. have to change a few things on my spoilboard before mounting .

@williamstauffer1542 11 ай бұрын

Thanks for this very informative video! My Vortex came yesterday so it's perfect timing!

@KenDo_creation 11 ай бұрын

One of theses days I will get one

@eprohoda 11 ай бұрын

ttoal unusual unboxing. ;))

@dwaynejohnson7499 11 ай бұрын

nice video it has built my interest in getting the vortex now. my biggest question to you is, what is the biggest area it can carve?

@SienciLabs 11 ай бұрын

The max stock diameter for the Vortex is 4", with the 30" kit doing 22" long and the 40" version being good for 40" long.

@alassafcam 10 ай бұрын

Does it work with shapeoko ?

@peteraziz5521 29 күн бұрын

Can this be used with the Genmitsu 3030-PROVer 😬? I really like Sienci Labs' stuff

@SienciLabs 23 күн бұрын

It should be possible. Check out the link below for more info. You'll have to check your clearance on your machine and have to do some rewiring on your controller to make it happen. resources.sienci.com/view/vx-using-other-cnc-routers/