Complete rebuild of the reds racing WRX Nitro engine Part 2

Рет қаралды 5,757

4 жыл бұрын

Here is the final assembly, all new o-rings, new piston, sleeve and con rod, also front and rear bearings was changed.
#track, #racing, #rc

Пікірлер: 75

@MrRealQ 4 жыл бұрын

Finally, I found the page I was looking for

@rajaa111 4 жыл бұрын

Thanks brotha

@wallyj2000 4 жыл бұрын

You are the man you know your stuff keep on coming

@thetoddperspective 4 жыл бұрын

I've been using Dow Corning molykote 111 oring lubricant for a couple years now and I love it. I massage it into all rubber and silicone. Keeps the orings from drying out, and lubricates them for easy removal/installation.

@rajaa111 4 жыл бұрын

Yes the green tube, I've used that my self it works great!!!!

@RcOffroad9513 4 жыл бұрын

"A lil 3-in1, just to wet our willy!" I died laughing! Great info, I'm gonna rebuild my wr7 whenever it gos, thanks for sharing this great info!

@rajaa111 4 жыл бұрын

Thanks brotha, glad the video could help

@romeldaniel74 4 жыл бұрын

Very informative! Thanks for sharing big👍👍👍😃

@kristobar2464 4 жыл бұрын

I like watching your videos I learn allot from them cuz of you're vids I got my kyosho up and running

@rajaa111 4 жыл бұрын

Nice, I’m glad they help !!!!

@shermanrc4723 4 жыл бұрын

Love the videos all ways learning something new thanks brother I love my reds

@roberttannenbaum6779 4 жыл бұрын

Awesome rebuild information thankx for the great video's you put out an great content

@TonysRcTechboom 4 жыл бұрын

Awesome Bro , great info and advice as always, sorry I've missed some of your vids, Bros for Life 👍🥰😎👍

@RcFunDrizzy 4 жыл бұрын

Nice video brother 👊 always some good info 😎 keep it coming 👍

@davidpeterson9422 4 жыл бұрын

Nice work 👍👍✌🇨🇦

@ar-arnitro 4 жыл бұрын

Awesome video bro

@andrewknight4656 4 жыл бұрын

Hell yeah!! They don't know!!!! I see you shinning bro!! Lol

@CrucialRC 4 жыл бұрын

Great video homie. I love me some wrenching🔧😎👍🏽

@rajaa111 4 жыл бұрын

My man, thanks brotha

@garymitchell9152 4 жыл бұрын

Great video brother

@rajaa111 4 жыл бұрын

thanks brotha

@zannisgoutis2869 4 жыл бұрын

Bro! Re-check your cooling head position, need rotating!

@rajaa111 4 жыл бұрын

Thanks brotha, usually the dot is to the side but it doesn’t matter, I like mines to the back because that position the Coolin fins to have the air pass through it but it’s personal preference. Thanks for the heads up

@franciscovazquez4589 4 жыл бұрын

Hahaha wet his Willy a lil bit n snuggy wuggy!! I love it bro 😂 good video as always 💪🏼👍🏼🍻

@TruSwagTv2 4 жыл бұрын

Incredible big bro stop by big SHOUT Out to you in my last two videos I finally went to a track and filmed 🤜🏽🤛🏽💯👊🏽💪🏽🤘🏽🤝🏽

@rajaa111 4 жыл бұрын

My man, I got the notice that you put some new videos up, I just haven’t had the time to sit and watch anything but I got you on deck now,

@hiberina5439 4 жыл бұрын

I've had trouble with my .28 SH engine, finally fixed it after just mad amounts of heat from the heat gun, but I could not get the piston to fit in the sleeve easily at all, even with oil. I was finally able to get it running and break it in so now it slidles flawless, but have you ever had this issue in the past doing a stock build or early rebuild prior to break in?

@rajaa111 4 жыл бұрын

No I've never had that problem before... was it a fresh piston and sleeve? Did it come as a set or was it a re-pinch?

@tonyu2298 4 жыл бұрын

I notice that your piston pin is on backward. The opening part should face the front of the engine allowing the nitro fuel to run in it and cool down the connection between your piston rod and piston pin.

@rajaa111 4 жыл бұрын

Really, I have to look into that, thanks

@ninjacow63 4 жыл бұрын

Good video as always bro. I’m going to definitely, need your help when I rebuild my engine. Peace ✌️ bro.

@rajaa111 4 жыл бұрын

You got it brotha...

@garykusnierz983 4 жыл бұрын

Great videos please let us know where you are getting parts from it would really help !! Thank you And congratulations on those on the trophies that you got down south

@rajaa111 4 жыл бұрын

Thanks brotha, I get parts for the reds engines from www.reds-racing-usa.com as for my kits I use amain, absolute Hobbyz, amazon or eBay

@gearheadaddict7183 4 жыл бұрын

Ceramic vape tweezers hell yeah

@djeagleman 3 жыл бұрын

Are you a DJ homie?... I hear you throwing them breaks in all the time...😁😁😁

@rajaa111 3 жыл бұрын

I mess around a little

@godsun358 4 жыл бұрын

I see you bruh

@kartooni 4 жыл бұрын

*Nice video bro, I'm drinving a mbx8 too, why the bearing must be frozzen ? just to seal all the stuf ?*

@rajaa111 4 жыл бұрын

Thanks brotha, you freeze the bearing so it will fit into the engine bearing spots, its a very tight fit

@sendit2873 3 жыл бұрын

freezing the bearing shrinks the steel very slightly which allows a easier fit remember heating metal swells the metal freezing it shrinks it

@sn47som 4 жыл бұрын

how you uninstall the bearings? good ol oven method?

@rajaa111 4 жыл бұрын

Check out me tear down video, kzfaq.info/get/bejne/ndmieqR01rnMZn0.html

@briansventures 4 жыл бұрын

I just acquired a protek ls5, I see you never run yours, mine came with a 2090 pipe, what do you think, good pipe for it, I also have a 086 I can put on it, don't have a 9901

@rajaa111 4 жыл бұрын

either pipes will work, the 2090 might give you a little bit more bottom end, they both are good choices

@kentuckybeardsman 4 жыл бұрын

She is back in action now! You running the old crank or you get a new one??

@rajaa111 4 жыл бұрын

Old crank, it didn’t show signs of wear, that’s the best thing about the dlc coated cranks they last forever

@kentuckybeardsman 4 жыл бұрын

@@rajaa111 yeah for sure!! Dlc is the way to go. I couldnt see any wear so thats why i asked. Couldnt remeber is ya said if you changed or not in episode 1

@mc83ssls1 4 жыл бұрын

😎👍🏾👍🏾

@mattfavor2940 4 жыл бұрын

Hey I see u got some expierence with reds engines. I’ve got an r5r but was curious if ya could give me a little info on the wr5 or wr5 Italia or the Scuderia. As far as how much bottom end they have compared to something like an O.S. speed or nova Paloma or other 7 port novas. Got a few of them. Thanks and keep the awesome work up.

@rajaa111 4 жыл бұрын

Thanks brotha, well the wr5 is a five port it will have better bottom end then the paloma, the paloma would make a little more power being as though its a 7 port. Far as the os its a 3 port which will be better for gas mileage if your racing

@SonicH6265 4 жыл бұрын

Rajaa 111 Do you think it’s a big difference between a modded and stock .21? Just wondering if it’s really worth the money. I have a couple modded .28.8s but No .21’s let me know what yo think

@rajaa111 4 жыл бұрын

it really depends on what your doing, for me its not worth the modded work cause I race I will never really use that power on a track, when racing you don't want the motor to be a light switch, you want to be able to use the full rpm range. Modding is cool but for me it's not worth the money. I can buy other goodies and still have fun with stock.

@lukas21614 4 жыл бұрын

Whats the best pipe + header for a stock novarossi 28/8 egine?

@rajaa111 4 жыл бұрын

I ran a 086 pipe with a 41001 that was a good mix for me, you can try a novarossi 9853 pipe same header. Are you bashing or racing?

@lukas21614 4 жыл бұрын

@@rajaa111 bashing :D

@lukas21614 4 жыл бұрын

@@rajaa111 will a nova 9886 pipe do the same?

@rajaa111 4 жыл бұрын

overHD not the same but with bashing I doubt if you could tell the difference. If you want really Hugh improvement get that motor modified

@lukas21614 4 жыл бұрын

@@rajaa111 ok thanks! Do you know any online Shops which sells modded engines?

@mohdfydzalridzwanothman9233 2 жыл бұрын

What is tool name on 17.59

@woogienitro 4 жыл бұрын

Lol..I bought 3 packages of C. Clips..I put them on in a large bag so if it did fly ..I got it

@rajaa111 4 жыл бұрын

Nice tip brotha 👍🏾👍🏾👍🏾

@tommieharrell6961 3 жыл бұрын

i was thinking about buying that engine . is it any good

@rajaa111 3 жыл бұрын

Yeah it’s ok, I’m not a fan, it has plenty of power but hard to get tuned and stay running

@jimmygonzales5756 3 жыл бұрын

Hello raj have a question about a new kyosho inferno neo st 3.0 what fuel should I use? I’m new to nitro and have been watching your videos and got into this sport

@rajaa111 3 жыл бұрын

I use bones brew, never had a problem. What ever fuel you decide to run, either a 30/10 or 30/8 the 30/10 will be a little easier to tune the engine

@jimmygonzales5756 3 жыл бұрын

@@rajaa111 aprciate it

@kristobar2464 4 жыл бұрын

I was thinking about buying a BIG RED engine for my kyosho but don't know if it will fit... How will I go about finding out if it will fit

@rajaa111 4 жыл бұрын

It should fit, makes sure it's a .21 or bigger engine

@kristobar2464 4 жыл бұрын

It's a .28 so it should fit

@kristobar2464 4 жыл бұрын

Thanks man I asked allot of ppl and nobody told me anything I really do appreciate it thanks

@TenkaDaHenkA 4 жыл бұрын

How much has the Rebuild Kit cost you? Isn't it like to buy a new one ? Have a nice week.

@rajaa111 4 жыл бұрын

I would say about 150 to 160 maybe, the piston and sleeve was they high dollar item, that was 115 alone, the o-rings was really cheap

@gonzalosantibanez4054 4 жыл бұрын

Hola, independiente que hablemos distintos idiomas, te quiero decir que es muy práctico y didáctica tú explicación. He aprendido muchas técnicas en todos tus videos. Muchad gracias y ojalá puedas poner algun video de cómo setear la dirección según lad pistas donde corres.