No video
Contoured Railing with Mitres and Ends
Рет қаралды 1,859
Joining mitres and ends on a contoured railing is simplified with a Lamello Invis magnetic joiner and 12mm dowels. The joint will be lasting and solid. This is an in-depth look at the process that will make you a better railing joiner.
Tools and Resources:
FastCap 2P-10 CA glue, 10-million-dollar stick, magnetic square, GluBot: www.fastcap.com
Festool Kapex saw, RO 90 Rolex sander: www.festoolcanada.com
Lamello Invis: www.lamello.com, www.ultimatetools.ca
Finishing Touch Carpentry supports Adult and Teen Challenge, a Christian-based addiction recovery program. www.teenchallenge.tc
Liability waiver: Finishing Touch Carpentry and Scott Earl Smith assume no responsibility for the safe usage of tools, and general safety practices. This is not a safety video and all users should research their own safety techniques prior to attempting any of the techniques shown in this video.
@paullasko2023 Ай бұрын
I enjoy the fact you talk about fittings that don't exactly match. It let's me know I'm not the only one who encounters that sort of thing.
@scottearlsmithFTC Ай бұрын
Thank you Paul. One of those things that unless you do this kind of work you wouldn't understand. Thank you for all your support. Cheers, Scott
@zephyr1408 2 ай бұрын
Sunday morning before Church just catching up brother been busy making cabinets ! Some other stuff also! God Bless u and yours !
@scottearlsmithFTC 2 ай бұрын
Great to hear from you! Thanks for checking in and commenting. God bless you as well, Scott
@MrRustyjackson 6 ай бұрын
My wife and I have done a lot of work with our local HOH. At one time we had an amazing ReStore in our area. My favorite organization.
@scottearlsmithFTC 6 ай бұрын
Ours is called ReStore as well. Good to hear from you! Scott
@billbrownvideo 6 ай бұрын
Great videos Scott! I love the presentation. They armed me with the information I needed to take on my first stair rail project professionally. As for chisels, something like Stanley Sweethearts would be a great upgrade. When tuned, they can tackle a good range of furniture tasks.
@scottearlsmithFTC 6 ай бұрын
Glad you like the videos and they are helpful in your profession. All the best with that endeavour. Thank you for the encouragement and the tip on the Stanley Sweethearts. I will look into them. Cheers, Scott
@bobmartin6055 6 ай бұрын
Such an amazing project, Scott! Always a pleasure to sit down with a cup of coffee and watch your craftsmanship! Have a wonderful day!
@scottearlsmithFTC 6 ай бұрын
Thank you Bob! Always great to hear from you. The encouragement I get from viewers is honestly what keeps me creating videos. Have a great weekend, Scott
@scottwilson4347 6 ай бұрын
Your videos are very informative..you make your plugs the same way I do. Press a bunch of them in a piece of wood and instead of trying to use a chisel to pop them out which sometimes isn’t very successful and especially if you need a thin plug. Then you cut them on a bandsaw, but I do it on a tablesaw and then they just pop right out and you can adjust the exact thickness, great stuff. Thanks, Scott.
@jayschuon8330 6 ай бұрын
Looks great Scott ! What a find to get bargain railing fittings. Of course the labor is more but you made it work ! Cheers !
@scottearlsmithFTC 6 ай бұрын
@@jayschuon8330 Thanks Jay. I bought a few extra fittings just in case. But not many people are doing this kind of railing anymore, so if I bought a bunch they'd likely sit in my shop for twenty years. Cheers, Scott
@scottearlsmithFTC 6 ай бұрын
@@scottwilson4347 Thank you for the encouragment Scott. I sharpened my plug cutter after that project. I'd like to find higher quality ones. I'm doing more small cutting on the bandsaw these days. Table saws make me nervous for small work. Cheers, Scott
@Tom-sd5ru 5 ай бұрын
Keep that grinder attachment its a lifesaver for scribing and coping
@scottearlsmithFTC 5 ай бұрын
Thank you Tom. I guess I was in frugal mode. I can always go and pick one up again. Good idea. Cheers, Scott
@Tom-sd5ru 5 ай бұрын
@@scottearlsmithFTC we all do that from time ti time lol
@scottearlsmithFTC 5 ай бұрын
@@Tom-sd5ru I think it's residual trauma from buying things like Festool Dominos and Hammer cabinet saws! hahaha
@Tom-sd5ru 5 ай бұрын
@@scottearlsmithFTC loll
@douglaskern4256 4 ай бұрын
Have to start initialing & dating the undersides of your custom work(lower level parts)
@scottearlsmithFTC 4 ай бұрын
Thank you for the comment Douglas. I actually have started branding newel posts on my last two jobs. Great advice and great way to advertise. Check out my video on branding your business: kzfaq.info/get/bejne/eNtzqs2Ups6qgJc.html Cheers, Scott
@searchingforaway8494 6 ай бұрын
You do such nice work! True craftsman! Im just about to embark on my first railing and miter cut. This is a HUGE help....
@scottearlsmithFTC 6 ай бұрын
Good luck with your project and thank you for the encouraging comment! Scott
@stephennickles7389 24 күн бұрын
What kind of alchemy are you practicing? That is amazing
@scottearlsmithFTC 24 күн бұрын
Hahaha. I love this comment. Thank you very much. Very encouraging. Cheers, Scott
@zephyr1408 2 ай бұрын
Uh oh? The cop talk came out we can’t hide it “highly intoxicated person”? I used to use that on DUI reports for the bad ones !
@scottearlsmithFTC 2 ай бұрын
Hahaha. Used that phrase hundreds of times in reports over the years. Cheers, Scott
Scott Earl Smith Finishing Touch Carpentry
Рет қаралды 1,6 М.
Scott Earl Smith Finishing Touch Carpentry
Рет қаралды 703
Insider Carpentry - Spencer Lewis
Рет қаралды 92 М.
Scott Earl Smith Finishing Touch Carpentry
Рет қаралды 1,5 М.
Scott Earl Smith Finishing Touch Carpentry
Рет қаралды 1,1 М.
Scott Earl Smith Finishing Touch Carpentry
Рет қаралды 10 М.