Converting a Bestway Above Ground Pool to Intex 1.5 inch Hoses Using Type B Adapters

Рет қаралды 237,340

4 жыл бұрын

I have a Bestway Above Ground Pool that is 20 feet by 48 inches. It's great! We upgraded our filter to an Intex 16" sand filter with saltwater chlorination along with an Intex skimmer.
We quickly learned that the 1.25" stock hoses that came with the pool weren't providing efficient suction and were quickly introducing air into the filter system. Additionally, the Intex skimmer wouldn't function properly. We decided to use Intex Type B adapters, but couldn't find anyone who had done this...and showed HOW to do so. Many people showed that they used them and liked them, but I wasn't sure how to properly use them. Hence this video.
Please like and subscribe if you found this to be helpful! Thanks so much!
Type-B Adapters on Amazon: www.amazon.com/dp/B07F91K3NC/...
Plunger Valves on Amazon: www.amazon.com/dp/B00EIMRZGS/...
Hose Clamps on Amazon: www.amazon.com/dp/B00I7TANC6/...
Intex 1.5" hose on Amazon:
www.amazon.com/dp/B00169SN6M/...

Пікірлер: 421

@colegunter9133 3 жыл бұрын

So I have the same pump and still have the two 1.25 inlets. The whole time I’m watching this I was like, “What is the point?” Then you flipped that valve off and that extra suction kicked in! My next pool project!

@getitdone308 3 жыл бұрын

Awesome. Before you do that project, check out my latest video where I upgraded my system to full 1.5 inlets. It was very easy...and better results.

@getitdone308 Жыл бұрын

@guillermoortiz6104 13 күн бұрын

@@getitdone308where’s the video, I can’t find it

@getitdone308 13 күн бұрын

kzfaq.info/get/bejne/itZynNd4ltjSo2w.html

@getitdone308 13 күн бұрын

kzfaq.info/get/bejne/itZynNd4ltjSo2w.html

@emtravelrn1 4 жыл бұрын

Thank you so much! I'm so glad I found your video. I too couldn't find how to do modifications. We are first time pool owners as well and have so much to learn. We just put up a 12' x 24' x 52" Intex a few days ago for my parents. I put a Hayward wall skimmer on it, but still haven't cut the liner because we are trying to make the adaptions. My dad is very handy, but this helped me understand what he was talking about. I was fearful about dealing with the outlet and trying to plug it up. Hopefully we will have it done tomorrow.

@getitdone308 4 жыл бұрын

I'm glad you found it helpful! Let me know if you have any questions. Glad to help out!

@ernieorozco730 3 жыл бұрын

Excellent video. Thank you for taking the time to illustrate your ideas.

@Hemi_all_day 2 жыл бұрын

Awesome video. I too have a Best Way pool and just upgraded to the Intex C2500. With 1 1/5. I'm about to order the same exact adapters that you purchased. Thank you for confirming my choice. Love your pool !

@getitdone308 2 жыл бұрын

Thanks so much! Hope it helps!

@mannyflores470 3 жыл бұрын

Just the video I was looking for in a pump upgrade.... thanks for great breakdown-explanation and items purchased.

@getitdone308 3 жыл бұрын

Hope it helps. Check out my latest video where I upgraded even further!

@margaretbennett5106 4 жыл бұрын

You helped me from the worry I had on the new upgraded pump I ordered..this is exactly the video I needed..thank you sir for your help

@getitdone308 4 жыл бұрын

I'm so glad it helped!

@getitdone308 3 жыл бұрын

No. But Leslie's is a chain and they're all over the country.

@user-gl4gg7mc6v Жыл бұрын

Thank you so much for your video. I ordered them on line and they will be here tomorrow. I really appreciate your help!!

@getitdone308 Жыл бұрын

Hope it helps!

@drunkhooker3444 Жыл бұрын

Thank you so much for this video! I just got an Intex sand pump and was trying to figure out how to get it to work on my Bestway pool

@getitdone308 Жыл бұрын

Hope it helps

@emilygriffis1437 3 жыл бұрын

This is exactly the video I needed. Thank you so much!

@getitdone308 3 жыл бұрын

No problem! Glad it helped. Check out my latest video where I upgraded even further.

@beer_bass Ай бұрын

Great video man! After the 1st year with a 14’x48” Bestway pool, we definitely needed a skimmer. Then realized I had to up grade to a bigger filter. I didn’t want to cut any holes into the pool. I bought the wrong adapters. This video is really helpful. Thanks!

@PaleFace1974 29 күн бұрын

Just add the on/off valves. No need for the adapters since you’ll still have 1 1/4 inch restriction at the inlets. He created more suction by turning off the valve without the skimmer!

@getitdone308 29 күн бұрын

The on/off valves need the adapters. They're 1.5. They won't fit on the 1.25 inlets.

@Afloresdc Жыл бұрын

Thank you for this video. It is helpful for me figuring out my new pool set up!!

@getitdone308 Жыл бұрын

Hope it helps. Check this out. I upgraded further. kzfaq.info/get/bejne/itZynNd4ltjSo2w.html

@Julei_ 2 жыл бұрын

Thank you so much. Seriously thank you. Easy to follow, easy to understand, I really appreciate it.

@getitdone308 2 жыл бұрын

Hope it helps. Check out my other video where I converted fully to 1.5" hoses

@Brooklyn-swag 2 жыл бұрын

Ty for the video. I bought a intex pool and upgrading the pump. Very useful video.

@getitdone308 2 жыл бұрын

Hope it helped!

@ottodog1999 2 жыл бұрын

Great detailed video with awesome description

@getitdone308 2 жыл бұрын

Hope it helps. I upgraded further here: kzfaq.info/get/bejne/itZynNd4ltjSo2w.html

@withl0vesteph886 Жыл бұрын

Thank you!! I’ve been searching for something to explain how to convert the filter for a a while now. 🙏🏽

@getitdone308 Жыл бұрын

Hope it helps!

@karenkalani8162 2 жыл бұрын

You are awesome. Thank you so much for the intensive, well delievered video. I'm a first timer too...I'm starting to learn something good stuff now. Mahalo nui loa from Hawaii.

@getitdone308 2 жыл бұрын

Glad it helped!

@Moparman58 Жыл бұрын

Finally a good video on this, I've been wondering how exactly to do this. Thank you

@getitdone308 Жыл бұрын

Hope it helps!

@gisellaucles1929 2 жыл бұрын

Definitely appreciate the detail video!!!

@getitdone308 2 жыл бұрын

Hope it helps!

@magiclashandbeauty90 3 жыл бұрын

Thank you so much for this!

@getitdone308 3 жыл бұрын

Hope it helped. I have another coming out shortly how I upgraded to full 1.5" tubes.

@cookiewillows7090 4 жыл бұрын

Thank you so much for this video! I couldn't find anything on how to actually "do" the conversion. I have a 14ft Bestway and the small pump that came with it. I think I clean the pool more than I have used it, lol! This is year 2 for the pool and just want to upgrade my filter pump.

@getitdone308 4 жыл бұрын

I hope it helps! I know it definitely improved my pool's efficiency!

@barbarastansbery5234 3 жыл бұрын

What did you upgrade your pump to?

@getitdone308 3 жыл бұрын

I upgraded it to an Intex 16 inch sand filter with saltwater chlorinator. I have the link in one of my other videos. I love it!

@debbiecressman5689 Жыл бұрын

Thank you for this!! Now I know what to do.

@getitdone308 Жыл бұрын

Awesome! I recommend this though. MUCH better results! kzfaq.info/get/bejne/itZynNd4ltjSo2w.html

@dodyboos2583 4 жыл бұрын

Thanks for the video !

@getitdone308 4 жыл бұрын

Glad you enjoyed it. Hope it helps.

@oscarsandoval843 4 жыл бұрын

Great video!. Thanks!

@getitdone308 4 жыл бұрын

Glad you enjoyed it!

@JennErmyMedia 2 жыл бұрын

Great video. Thank you.

@getitdone308 2 жыл бұрын

Hope it helped!

@angelariley1302 2 жыл бұрын

This video helped me a lot.. thank you

@getitdone308 2 жыл бұрын

Awesome! Check out how I upgraded further: kzfaq.info/get/bejne/itZynNd4ltjSo2w.html

@user-hn3hp6kh4e 4 ай бұрын

Best video of all!! ❤ thank you

@getitdone308 3 ай бұрын

Hope it helped

@joemicro9120 3 жыл бұрын

Thanks for a great video you’re the best

@getitdone308 3 жыл бұрын

Hope it helps! I have another video coming out shortly about how I made another upgrade. Keep your eye out for it.

@rarityd 3 жыл бұрын

I took a step further and enlarged the “B” holes to accommodate the 1.5 fitting. It was scary to put a razer to the liner but the results are rewarding. Thx for the vid

@getitdone308 3 жыл бұрын

I did something similar this year. Check out my latest video to see how I eliminated 1.25" hoses outright.

@scrappinmomma4 Жыл бұрын

How do you find a t connector that is 1.5” on all sides?

@getitdone308 Жыл бұрын

Those are difficult to find. Best bet is to go to Lowes or somewhere and rig something. What I did was go full 1.5" and install an in-wall skimmer. Check my other video out for that.

@Superman-xr1oh 2 ай бұрын

@@getitdone308What if you dont want to install an in wall skimmer though?

@getitdone308 2 ай бұрын

You'd have to cut out the 1.25" inlets and replace with 1.5".

@wetjuicy87 11 ай бұрын

Thank you! We had a very bad moment today, it’s our first pool so water was just going everywhere !

@getitdone308 11 ай бұрын

Hope it helped

@MilVetGaming Жыл бұрын

The skimmer you have is the same as mine. It came with a stopper and I thought it was strange the stopper has a little hole in it, lol. I ended up using the stopper (with the hole) on one of the two inlets that is not connected to the skimmer. This provided more suction for the skimmer but still pulls a little bit of water in from beneath the water line. The setup allows me to clean the top of the pool water using the skimmer with strong suction and inside the depth of the pool but at a much slower rate. I plan on buying plunger valves because the stoppers are a pain in the butt to use just to clean my filter cartridge.

@getitdone308 Жыл бұрын

Agreed. Check out what I did about it here. Fixed it completely. Love the results. kzfaq.info/get/bejne/itZynNd4ltjSo2w.html

@MrJayrosa122 3 жыл бұрын

Good stuff hope I can get this done on my Coleman pool

@getitdone308 3 жыл бұрын

You should be able to. They're all the same company(I think). Check out my latest video for how I updated even further to eliminate 1.25" hoses outright.

@jagdishkrishnamurthy4867 10 ай бұрын

The unit heats up fast and is super quiet. It looks fancy kzfaq.infoUgkxl8Od2BvnGbn1ffwqsuFXW0QnmcZgMiVY and can be kept in the living room. It gets hot within a split second of turning on the unit. The build quality is exceptionally good and is safe to be around kids and pets. This one is super quiet and can be kept on while in office meetings, my wife loved it. It shows the temperature right on the unit which is very useful and adding a rotating feature helps to heat up the surrounding, so other people will not fight with you for heat. It is right as described in the description..!! Definitely recommend!!

@dawncrawford9159 2 жыл бұрын

🙏 you have the only video on this subject 🎉

@getitdone308 2 жыл бұрын

I hope not. But that's why I created this channel...I couldn't find anyone who had already documented this stuff! Anyhow, check out this video. I upgraded further. kzfaq.info/get/bejne/itZynNd4ltjSo2w.html

@Knuckle_Sandwich_Hand_Wraps 2 жыл бұрын

I am from the UK and have a Bestway 16ft 48inch round pool. But to help warm the water i have painted the exterior walls black, this really helps absorb the suns rays as before the pool was light gray. I also have a black pool cover. And lastly, i have 600ft of poly pipe running from my pump around the yard, the water coming back out of the pipe is much warmer than the water in the pool. I understand painting the exterior of the pool black my look ugly, but it really makes a huge difference. Especially as im in the UK and we dont have long summers.

@getitdone308 2 жыл бұрын

Being from TX, I have the opposite need. I don't need warmer water. I need to cool it most days!

@jeffm9722 Жыл бұрын

What kind of paint did you use?

@Knuckle_Sandwich_Hand_Wraps Жыл бұрын

@@jeffm9722 the wrong paint actually. At the time i had ‘chalkboard paint’. But its been 2 years and its fine.

@TheInfinityLion Ай бұрын

Long as it works man. You can also turn off your pump for about an hour and float a large black tarpaulin ground cover a couple feet deep and wow the difference it makes

@wrighthouse2024 Жыл бұрын

Thank you so very much you are a lifesaver ❤❤❤❤😅😅😅😅. You saved me so much time and stress. Great video

@getitdone308 Жыл бұрын

Glad it helped!

@NitaBPhotographyLLC 4 жыл бұрын

Great jobe sir I have this same filter and saltwater system and I cant fine NOOO good videos on this system

@getitdone308 4 жыл бұрын

In this day and age when you can find a video on almost anything, I too was surprised how little content there was on this. Glad you enjoyed it. Hope it helps!

@suewarner435 2 жыл бұрын

Hi I too am so glad I found your video , sure did answer questions what I should do and how to do it. But I have one thing my pool has 3 outlets two that suck in water and one that returns but the upgrade pump will only have to hoses so I think I am going to just plug up one of the incoming to the pump with the black cap and keep the cove screwed on and see what happens this season. If there is a problem I will get another hose and a tee but I will keep my fingers crossed. Kinda mad that they would sell that size filter for the bigger pool, I had nothing but problems keeping the algae out the pump could not handle it ad it going 24/7. Again thanks for your video

@getitdone308 2 жыл бұрын

Check this video out how I upgraded further. I'm glad I did!

@r0cknr0bcannel33 3 ай бұрын

Ty couldn’t find any video on this

@getitdone308 3 ай бұрын

Hope it helped!

@MrHector1207 3 жыл бұрын

Thank you

@getitdone308 3 жыл бұрын

Hope it helps. Check out my latest video for how I upgraded even further!

@tomcook5813 Жыл бұрын

Breeze are good American made clamps, great choice

@getitdone308 Жыл бұрын

I agree!

@Virgolove 11 ай бұрын

I replaced these hoses exactly as you suggested. It definitely helped the output. Thank u... i have the same pool. I cannot figure out why the 2 round inlet(? ) Circle parts do not suck anything from the pool. No debris, no water...no suction at all. The only filtering i get is thru the skimmer attached to the side of the pool...its clean. But never could get the little circle, net looking inlets to work. They are hooked up correctly. I cant find any videos for this:/.

@empesario 4 жыл бұрын

Interesting solution to the upgrade. Have same pool and planning to do upgrade as soon as the new sand filter comes in. Question i have relates to the output or jet on the other end which is a straight 1.5 from pump to pool as is, unlike the 1.25 tubes that came original on the pool. given the pool is already filled in my case ( and yours) did you swap out the Intex "aeration" inlet or did you keep it stock. I cannot for the life of me figure if you can screw it off while pool is full or if it makes difference in water output.

@getitdone308 4 жыл бұрын

I did swap it out while full. I bit the bullet and just went for it. Fortunately, it was VERY easy and quick. I'd say for no more than 60 seconds water was coming out. Just have everything ready and you should be fine. The water pressure from everything coming out was minimal.

@ZagDadz 3 жыл бұрын

very nice! thank you, I wasn't sure those 1.25 nipple to 1.5 adapters would work. Can I ask, how are you vacuuming? what type of setup/connections do make?

@getitdone308 3 жыл бұрын

Here's the video for the vacuum I use: kzfaq.info/get/bejne/ptp9rNOQmbK7Yqs.html

@darrinterrell4730 Ай бұрын

Nice stairs in to the pool . Do you got video on them

@getitdone308 Ай бұрын

Yes I do!

@YelenaTX 4 жыл бұрын

Thank you so much for the video. Please share what adapter 1.25 to 1.5 inches did you use for the skimmer? Thank you

@getitdone308 4 жыл бұрын

Hi Yelena, I put the link in the video description.

@MrFelix617 9 күн бұрын

Do you have a video on the steps you made for the pool , great video by the way

@getitdone308 9 күн бұрын

Thank you! I do. Check my channel. Admittedly, I built the steps before I decided to make a video, so it's more of a talk through.

@jacobeskridge8113 Ай бұрын

I have the same pool. Did it take much effort or isn’t it complicated to put in an eyeball jet outlet? Thanks for the video. It was great.

@nichawsy 3 жыл бұрын

Nice video. Can you tell us where you purchased the adapter at 6:19 to go from the surface skimmer hose to the 1.25" inlet on the pool please? I don't see a link in your description. TIA.

@getitdone308 3 жыл бұрын

Thanks. Hope it helps.. check out my latest video where I upgraded to 1.5" completely. In the meantime, the black plug came with the pool and came with my skimmer. I didn't buy them separately. You can get them on Amazon though...www.amazon.com/dp/B08JTRYS5G/ref=cm_sw_r_cp_apa_glt_fabc_QSWE3SE0B3QWJYPYX8RV?_encoding=UTF8&psc=1

@missusy72 4 жыл бұрын

THANK YOU!!! Do you have a link of where you bought your adapters?

@getitdone308 4 жыл бұрын

Yes, they are in the video description. Thanks!

@abesqueda Жыл бұрын

Do you by chance have the Amazon link to the eye ball inlet.. TIA

@getitdone308 Жыл бұрын

The eyeball inlet came with the skimmer.

@sjgoff 4 жыл бұрын

Exactly what I was looking for!

@getitdone308 4 жыл бұрын

Glad it helped!

@Stryyder1 3 жыл бұрын

Just ordered a new pump and I wanted to upgrade my hoses this is exactly what I need thank you for posting this. Do you have a link for that outlet diverter?

@getitdone308 3 жыл бұрын

This is what I bought. Hope it helps! www.amazon.com/dp/B00EIMRZGS/ref=cm_sw_r_cp_apa_fabc_7FYKDKR45QV6JSAKYX7Z?_encoding=UTF8&psc=1

@greglogsdon5158 2 жыл бұрын

I would clean most of the surface debris off the top of the water with a cleaning net and then let the skimmer take care of the rest but that's just me anyways awesome video greatly appreciated.

@getitdone308 2 жыл бұрын

I agree. Sometimes I just can't get to the net in time. The skimmer takes care of it so I don't have to.

@janjaf844 Ай бұрын

The internet 1.5 hose...is that what was connected to the B spot on pool? I wish I could send you a pic of my setup so you can help since it's pvc. I have a leak and no idea how to fix it

@user-ln8hk1zl5m Жыл бұрын

I would love to see a how to on your pvc pool hose holder

@getitdone308 Жыл бұрын

Unfortunately, I didn't make one.

@rz514 11 ай бұрын

Hello, what is this grey housing that you are pointing at @ 11:08 into the video.. thank you!! the 1.25 to 1.5 inch adapters dont seem to come with a housing (looking at amazon picture)

@getitdone308 11 ай бұрын

It came with the skimmer. It's the piece that connects to the pool inlet.

@emeresbestres1 3 жыл бұрын

Where did you get that mat for underneath the ladder legs? I'm looking for something like this.

@getitdone308 3 жыл бұрын

Home Depot. They have them in the stores. About $30

@neolexington 2 жыл бұрын

Did you have any leaking with the plunger valves being attached to the type B adapters? Both pieces have a rubber gasket and I wonder if that might be a problem down the road? Thanks for the video!

@getitdone308 2 жыл бұрын

No problems at all!

@johndipippo377 4 жыл бұрын

Great video! I just ordered the Intex 3000 gph sand pump so can you please post the links to the clamps and fittings you bought in amazon?

@getitdone308 4 жыл бұрын

Sure thing. I just added them to the video description so everyone could see. Thanks for the feedback!

@ConditionZero76 2 жыл бұрын

GREAT VIDEO man, can you PLEASE give me the link to the directional eyeball you bought. I've tried 3 different brands & none of them fit. I have the same pool as you. Thanks so much Buddy

@getitdone308 2 жыл бұрын

It came with my filter/pump system. When I upgraded, it was part of the kit. Check out my last video where I show how I got an even better eyeball for the Hayward skimmer.

@XDXDXDXDXDXDXDXDXDXDXDXDXDXDXD 2 жыл бұрын

Hey im from Panama and I have a 12’ x 39’ and Im ordering the B adapters but i want to know if you think I can connect the pump hose directly to the adapters so I don’t need to buy the valve, what do you think?

@getitdone308 2 жыл бұрын

You can. The issue is when you need to do ANY maintenance. You can't stop the water from flowing without a valve.

@noravazquez896 4 жыл бұрын

New pool owner here and the video is great! I bought the same sand filter pump as you have here. I have Intex 15ft that comes with 1/4 fittings and I bought the adapters to fit 1/2 in (should be here today) but re: the Eyeball inlet do you need an adapter for that as well (to connect the inlet from inside the pool) ? since pump eyeball inlet comes in a 1/2 in. If an adapter is used (inside the pool) the inlet will not be flush against liner. Hope I make sense.

@getitdone308 4 жыл бұрын

When I got the eyeball inlet, it came with the sand filter/pump kit, so it also came with the 1/2 adapter (and plunge valve), so it was ready out of the box.

@michellenorris2165 4 жыл бұрын

@@getitdone308 are you saying the eyeball inlet came with your Intex sand filter pump or you purchased it seperately? I just purchased the Intex sand filter pump, just making sure I have all I need once it gets here. I'm a first time pool owner too!

@getitdone308 4 жыл бұрын

Yes, when I bought my separate sand filter/pump/saltwater chlorinator (the 16" Intex filter), it came with the 1.5" outlet and adaptor.

@onopal1 2 жыл бұрын

Thanks for the video 🙏 Q: I Purchased 2 59” hoses with nuts but they are too long water not sucking in. Any idea where to buy shorter ones?? Thanks!

@getitdone308 2 жыл бұрын

ChangTa Pool Filter Pump Hose11388 for Intex 26675EG QX2100 Krystal Clear 14 Inch Sand Filter Pump & Saltwater System Interconnecting Hose a.co/d/6TAptIJ

@eightisgreat 2 жыл бұрын

Where did you find that adapter to go from the skimmer to the pool inlet? The skimmer came with the hose and that blue screw on adapter but nothing to go into the inlet hole.

@getitdone308 2 жыл бұрын

It's the inlet that came with the pool. There's a little screw on it that after you remove it, you can unscrew the cap and it exposes the threads. Then you screw the blue adapter to it.

@eightisgreat 2 жыл бұрын

@@getitdone308 aaaahhhhh. Thanks! Weird that they put a screw through it!

@kristanorman8316 2 ай бұрын

I know this is a few years old, but can you tell me what eyeball inlet you used? I’m assuming to fit a 1 1/4? I’m just a girl trying to change a pool filter pump lol so I’m sorry if I’m sounding dumb.

@getitdone308 2 ай бұрын

The eyeball inlet I used came with the Intex pump. Later, I upgraded to an in-wall skimmer/filter and got a different/better eyeball inlet. I have a video for that as well.

@871jamie 3 жыл бұрын

I didn’t use those small outlet ports, instead I installed a through wall skimmer. Keeps the pool cleaner and provides better flow to the pump. I also have a very nice water fall my girl friend and I built out of PVC that’s about 4 ft above the pool so the increased flow using the through wall skimmer makes it really flow good. I also used 1 1/2 “ hoses and PVC pipe.

@getitdone308 3 жыл бұрын

Me too! Check out my latest video.

@871jamie 3 жыл бұрын

@@getitdone308 I used the same skimmer.

@Superman-xr1oh 10 ай бұрын

@@871jamieThe only thing I don't like about those through the wall skimmers, is that you can't fill the pool with as much water.

@getitdone308 10 ай бұрын

That is true. You lose a couple of inches. But it's not that noticeable. The tradeoff is worth it.

@Superman-xr1oh 10 ай бұрын

@@getitdone308 Definitely, I have the in the water skimmer, I'm not a huge fan, lol. Any new videos coming by the way? Take care!

@jlvsm52581 Ай бұрын

Where you get the eyeball inlet I have the same pool did all the upgrades like you did all I need is that inlet

@getitdone308 Ай бұрын

It came with the upgraded pump I purchased.

@gerryairs1310 2 жыл бұрын

did you use treated lumber for your steps and what are they setting on in the pool

@getitdone308 2 жыл бұрын

Yes I did. I have them setting on a rubber mat (the kind that go in commercial kitchens). It's been up for 3 years now. Working great. No problems!

@bigbonedthankyou7849 4 жыл бұрын

Thank you for this video very helpful. But Im having trouble with the inlet now are you useing an adabtor for that too?

@getitdone308 4 жыл бұрын

What problem are you having? My pool came with a 1.5" opening (TO the pool) already...and 1.25" openings (FROM the pool. So the water coming out of the pool comes out of 1.25" openings and goes back into the pool through a 1.5" opening.

@bigbonedthankyou7849 4 жыл бұрын

@@getitdone308 oh I see well mind goes back into the pool with a 1.25 I have an intex pool 15x48 it came with a ok filter but we use the pool so much that it just wasn't working for us. I bought an upgrade thinking I could just get adapters. They worked for the outlets but the inlet was different all together I will probably just have to return it. Thank u for responding.

@getitdone308 4 жыл бұрын

Is the inlet to the pool the same as the outlet from it? Is it the rubber/plastic "nipple"?

@bigbonedthankyou7849 4 жыл бұрын

@@getitdone308 yes they are all the same size

@bigbonedthankyou7849 4 жыл бұрын

@@getitdone308 yes they are rubber

@joshshirley4141 2 жыл бұрын

did all those 1.5 inch hoses come with the intex sand pump? or did you have to buy those separate also?

@getitdone308 2 жыл бұрын

I had to buy those separate. Check out the last video I posted that shows the even better (full) conversion to 1.5. It's WAY better!

@cliffgroth6026 2 жыл бұрын

I love your video...I wanna do the same thing as you did. Many only question is where do you get the housing unit just inside the pool to connect the skimmer to? I have already ordered most parts as you mentioned. I have a similar pool as you, mine is 18' x 48". I'm gonna use my Intex pool pump I used last year...which is much stronger.

@getitdone308 2 жыл бұрын

Check out this video for when I upgraded even further (and better). But to answer your question, the housing unit came with the skimmer I bought. kzfaq.info/get/bejne/itZynNd4ltjSo2w.html

@cliffgroth6026 2 жыл бұрын

@@getitdone308 I got the skimmer today. My question is the inlet valve cover inside the pool don't unscrew. The Intex skimmer came with the hose and screw on adapter to screw on. I can pull it out fine...just want unscrew. Thank you for the previous response.

@getitdone308 2 жыл бұрын

There should be a tiny holding/mounting screw on the inlet. Take it out and the face will unscrew.

@cliffgroth6026 2 жыл бұрын

@@getitdone308 I removed the screw earlier, could not unscrew it. After your reply I tried again and was determined to unscrew it! It was screwed on VERY TIGHT, I used a paper towel wrap with vise gripes...and after several attempts...it broke loose. I got the skimmer going and the 1 1/2 hoses connected per your instructions. Working great! I really appreciate your help...Thank you.

@cliffgroth6026 2 жыл бұрын

@@getitdone308 I will probably do this after this season after I drain it. This procedure you did was on my mind when I set the pool up, I was kinda afraid to cut through the fabric wall...but seeing you have done it I might try it. My concern was leaks depending on the strength of the wall. It's a brand new Coleman Pool 18 x 48. However I think it's partially made by Bestway. I love it so far, just waiting for the water to warm up to jump in.

@brandonhenkowicz298 11 ай бұрын

Thanks for the video, how come you cant just plug one inlet and run the skimmer directly to the pump with 1 line thats 1.5?

@getitdone308 11 ай бұрын

There's a couple reasons and things to co sidereal before doing that. The forst is dependent on your pump. If you have a weaker pump, you'll need both inlets to provide water. Also, in the event you don't want to run the skimmer (which the manufacturer tells you to do when the pool is in use), then having both inlets running is optimal. To your point though, I ultimately made the leap to an exterior skimmer that fixed the problem outright.

@leroygregory6685 3 жыл бұрын

I have a above ground pool 20x12x48 oval I watch your video I bought the b clamps but it wont fit on the T juntion on both sides any sugestion

@getitdone308 3 жыл бұрын

Did you have the same B Clamps I had? The same T junction?

@brownskiiee 16 сағат бұрын

In order to run this pump, did you have to cut your pool lining for the pool inlet “A”?

@getitdone308 16 сағат бұрын

No I did not. But I did do that the following year. Check out my other video to see what I did.

@bob81354 Жыл бұрын

Great job I noticed you have a wooden steps going into the pool can you tell me what you used at the bottom of your steps

@getitdone308 Жыл бұрын

To protect the pool? I bought a rubber mat from Home Depot. The kind used in commercial kitchens. kzfaq.info/get/bejne/h7Zpn9mil5mmhJs.html

@michellenorris2165 4 жыл бұрын

What is the part called that the leaf trap hose it attached to? It has two black wires attached to it and then a hose runs to the tank with the sand in it. I purchased the 3000 Intex Sand filter but that did not come with it.

@getitdone308 4 жыл бұрын

That is the saltwater chlorinator. I love it! I haven't had to add any chlorine to my pool!

@SoCalMisfit712 3 жыл бұрын

Are they still holding up good or have u changed for this season?

@getitdone308 3 жыл бұрын

They held up fine. I did do another upgrade. I have another video coming out shortly. Keep your eye out for it.

@nycoleholbrook5956 Ай бұрын

Thank you for this video! I need some more help on how to get the inlet to work on the inside of the pool. I have no idea how to adapt it😢can you help? Also I’m trying to do the same mods that you did and also a first time pool owner. I don’t want to mess it up, I need help🙏🏻

@getitdone308 Ай бұрын

I do have a series of videos, so check them out. The next year I upgraded to full 1.5" hoses and it was a game changer!

@codyo651 Жыл бұрын

What is the "pool nipple" part you referred to before assembling any of the intake/ outake valve parts? My pool is missing this part and I need to replace it. Thanks!

@getitdone308 Жыл бұрын

It's the rubber piece that's attached to the pool that you clamp the hose to.

@codyo651 Жыл бұрын

@@getitdone308 For sure, but I can't seem to find this particular piece anywhere. Any ideas? I appreciate it.

@codyo651 Жыл бұрын

@@getitdone308 It is 100% a stupid question. I'm just blown away that I can't find any information in regards to this piece. I was contemplating using a 3/4" pvc pipe or something, but what I ended up purchasing and attempting to put together just leaked anyway. I just don't want to keep buying couplers of sorts just to consistently have leaks.

@getitdone308 Жыл бұрын

You can't find it anywhere because it's attached to the pool. It's not something you buy. That said, if you wanted to, you could cut them out and affix bigger openings for bigger hoses.

@codyo651 Жыл бұрын

@@getitdone308 Thank you! That makes more sense now. I was given a new pool but it was missing these parts.

@stefanocillis9935 2 жыл бұрын

Where did you get the eyeball return for this pool? what size fitting??

@getitdone308 2 жыл бұрын

It came with the skimmer.

@kristenbyrne5423 Жыл бұрын

We have a Bestway 15 ft round 48 in deep pool. Can I ask how you connect the blower inside the pool and plunger valve outside the pool with the holes in the pool sides that are too small?

@getitdone308 Жыл бұрын

You need to get Type B adapters. Intex 4 Pack Type B Adapter for Above Ground Pools Converts 1.25" to 1.5" a.co/d/1fi1s2Q

@luhia9378 3 жыл бұрын

Where did you purchase your eyeball inlet from?

@getitdone308 3 жыл бұрын

It came with the upgraded pump I purchased.

@freddieeidson6290 2 жыл бұрын

Hi. Thanks for the video. I’m a first time pool owner as well now and I’m looking for upgrades as well. I appreciate the links you provided too. Do you happen to have a link or remember the eyeball inlet that you could sent me?

@getitdone308 2 жыл бұрын

Hi Freddie, the eyeball inlet came with the pool. A better one came with the skimmer I bought. When I upgraded my skimmer again...it came with the eyeball inlet. They do this because the skimmer is a system that requires the water to be "swirled" in the pool to move debris to the actual skimmer.

@freddieeidson6290 2 жыл бұрын

@@getitdone308 thank you. I saw that one came with the Hayward skimmer on your other video. My BestWay 20’x48” didn’t come with an eyeball inlet though. Maybe they changed the components. I’m planing on upgrading to the Hayward skimmer too but it will probably be next year since I have everything set up already. Thank for responding so quickly!

@MrMedicalUK 2 жыл бұрын

Got a link to these the link you got shows something different I can only find these that go to the 1 1/4 inch

@getitdone308 2 жыл бұрын

Intex 4 Pack Type B Adapter for... www.amazon.com/dp/B07F91K3NC?ref=ppx_pop_mob_ap_share

@toniadams3783 Жыл бұрын

As soon as I put 1.5 inch hoses on it was heavy enough to rip off the adapters (I did use the plastic clamps though so I will try the metal) I'm wondering if you found the plunge to help with that? I thought it would add even more weight so I didn't get them. But maybe I should try that😂 idk. Something is causing this new pump to overflow and it's got to be the hose positions or something because I have double checked this pump 100 times and the o ring couldn't be any more secure

@getitdone308 Жыл бұрын

The plunge valves definitely help with that.

@nickieadkins9174 3 жыл бұрын

Can you give us the measurements and the materials that you used to make the PVC stand for your hoses please? I have this issue as well with the hoses being too heavy

@getitdone308 3 жыл бұрын

I used 1/2 inch PVC. There's no real plan for it. It's just a few 90° elbows and T's connecting them.

@danielwashinski3190 2 жыл бұрын

Question.....is that treated lumber ladder?

@getitdone308 2 жыл бұрын

Yes it is. kzfaq.info/get/bejne/qZ9ygMacsrm0mqc.html

@happyhearthappylife 3 жыл бұрын

I wanted to ask why a wooden latter in the water.. does it condition the water? Good video over all

@getitdone308 3 жыл бұрын

Check out my video on the ladder. It's been awesome!

@issakarnib1243 4 жыл бұрын

18ft by 9ft 48in Bestway oval pool, 3500 gallon capacity, should I buy the 2100 gph sand filter from intex or 2800gph given the size of the pool. Also when using an intex sand filter on Bestway pool, are the adapters and clamps the only thing required to make it compatible to the pool?

@getitdone308 4 жыл бұрын

With that size pool, you probably only need the smaller one. That said, there shouldn't be any harm to get the bigger one. It just filters more water per hour (no harm in that). The Intex/Bestway compatibility is almost identical right out of the box. In other words, you can connect to Intex hoses to the Bestway fittings no problem.

@issakarnib1243 4 жыл бұрын

Get it Done thanks for quickly responding, sounds good. Also, do you have a link on setting up the skimmer, need to also purchase that too

@getitdone308 4 жыл бұрын

I do! Hope it helps! kzfaq.info/get/bejne/iM1mqKxz1JbFdZs.html

@margaretbennett5106 4 жыл бұрын

I'm following the adapter outside the pool bit I need a skimmer..how did you attach the inside of pool..what do I need to order..it is bestway 18 x 52 has those small input on 1 1/4 pipe

@getitdone308 4 жыл бұрын

I have a video on my skimmer. It shows how I attached it. Here's the link: kzfaq.info/get/bejne/iM1mqKxz1JbFdZs.html

@margaretbennett5106 4 жыл бұрын

Let you know skimmer up and running..you know that your videos helped me change over to a larger pump and those plunge adapters are awesome. I refer your video to my friendswho are going to get an above ground pool

@getitdone308 4 жыл бұрын

Glad to know they helped! As a 1st time above ground pool owner myself, I found it interesting that there weren't a lot of "how to" videos for upgrading. Instead, they were more of "this is what I did" as opposed to "this is how to do it". I plan to do more, so please stay tuned!

@shereelary3471 Жыл бұрын

What size hose clamps did you buy?

@getitdone308 Жыл бұрын

Bigger than 1.5"

@shereelary3471 Жыл бұрын

Ok because I see Amazon list them in various sizes such as size 6, 20, 24, 28, 32, etc.

@kentuckylifeatitsbest8947 3 жыл бұрын

Thank you so much for the video, it helped me so much. I just finished all the hose conversion and I am fixing to change out the portable skimmer to a Hayward skimmer. It was actually easy to convert after watching your video, thanks again!!!

@getitdone308 3 жыл бұрын

Glad it helped. Check out my latest video where I converted to a Hayward skimmer too!

@alextettmar8301 3 жыл бұрын

What is the device with the two black wires that the water goes thru before it goes back into the pool

@getitdone308 3 жыл бұрын

I have a saltwater system. That's the part where the saltwater water goes through the electrodes to create chlorine.

@chefboiRD1 3 жыл бұрын

did you cut a hole for the eyeball jet intake? since its also 1.25'' opening?

@getitdone308 3 жыл бұрын

No. The jet intake is factory set at 1.5"

@chefboiRD1 3 жыл бұрын

Oh weird. Our best way pool is the same size but has the 1.25” port. Guess I gotta do it 🤮

@getitdone308 3 жыл бұрын

The hole in the pool is much larger than a standard 1.25 opening. The hose that goes out of the filter...into the pool is a 1.5" hose already.

@calygtz1221 3 жыл бұрын

Do you have a amazon link for the eyeball inlet?

@getitdone308 3 жыл бұрын

My inlet came with my filter when I upgraded. You can just search for "Intex eyeball inlet" and there's plenty of options. Check out my latest video where I upgraded my skimmer and got an even better eyeball inlet (that came with it).

@nickieadkins9174 3 жыл бұрын

For the housing you are talking about at 11 minutes. What if the pool you have doesn't have the strainer, there are just 2 nipples coming out of the side for the inlets into the filter. Can I still use this method or will I need some type of housing piece to go inside the nipples for the hose clamp to clamp on to?

@getitdone308 3 жыл бұрын

If you're saying the pool just sucks straight out the nipple, yes, you can just clamp the adapter to the nipple. If you check out my latest video, you see that I did just that. That said, the skimmer has a blue adapter that connects the suction hose to the pool. That blue adapter needs to screw onto the grey housing (that you don't have). So if you're going to use the skimmer, you should purchase an inlet to screw into.

@nickieadkins9174 3 жыл бұрын

@@getitdone308 Thank you!

@charlesk1140 2 жыл бұрын

AWESOME VIDEO!!! I do have a question though. As I to am a first time pool owner how many of each part do I need to buy? My pool is only 16X10X48 and like your I have 2 inlets and 1 outlet. So how many of each part would you suggest I buy? Thank you again. This video saved me from a massive headache AND a CRANKY WIFE!!! 🤣🤣

@getitdone308 2 жыл бұрын

Depends on what part you're asking about. That size pool will need the same count of "stuff" I used. Also, I upgraded further. I recommend this method more. kzfaq.info/get/bejne/itZynNd4ltjSo2w.html

@brookedavis3333 3 жыл бұрын

I feel the need to comment only because I barely figured this out. With the skimmer it comes with a little plug that slows the water suction on one side so the skimmer sucks more of the water. Last year I didn’t cover the other suction hole and skimmer worked but not as good as it does now that I use the plug that came with skimmer.

@getitdone308 3 жыл бұрын

Correct! I covered that in my other video too.

@RonFleener 3 жыл бұрын

Hey man, just curious, where'd you find the design for that bad@$$ set of diy steps.. upon further research, you made a video. Lol thanks

@getitdone308 3 жыл бұрын

No design...just a lot of thought (I overthought it actually). When all was said and done, it was a simple concept. I've had it up for 2 seasons. Still "strong like bull". No problems whatsoever.

@Ninja-nn4or 3 жыл бұрын

"You're only as strong as your weakest link" You'll never have full functional power as long as you have 1.25 conversions anywhere in your lines. They only way to actually fix this problem is to cut out the original inserts and replace them with 1.5

@getitdone308 3 жыл бұрын

You're right! This conversion did improve my suction...but not maximize it. Check out my latest video where I upgraded even further this year