THANK YOU. I could not figure out what kind of adapter I needed to do this It's a type b! Thank you so much This does help thanks for caring
@nancyross3004Күн бұрын
Thank you so much! Over the years, ive used a shop vac which takes WAY too long and so much effort. I just tried this and its draining right now! THANK YOU!!
@getitdone308Күн бұрын
Glad it helped!
@eliseocuevas7142Күн бұрын
Were can I find the link to those plunger valves please
@getitdone308Күн бұрын
Amazon. Just look for Intex plunger valves
@eliseocuevas7142Күн бұрын
@@getitdone308 thank you for responding 👍
@eliseocuevas71422 күн бұрын
Is that a Coleman pool 18 x48?
@getitdone3082 күн бұрын
Bestway 20x20 (same as Coleman)
@eliseocuevas71422 күн бұрын
@@getitdone308 ok thanks because I wanted to know because I also wanted to put those water valves like you did because it's a pain having to clean the filter every time and having to un do those hoses and just wanted to know the size of those port's to get the same set up as you my friend and thanks for the video very appreciated 👍
@getitdone3082 күн бұрын
Check out my other video where I upgraded further to full 1.5" hoses. I did an in-wall skimmer. Made a WORLD of difference.
@jasondunbar36672 күн бұрын
Could you just plug up one of the B holes and use a single hose. From your skimmer to the pump?
@getitdone3082 күн бұрын
To do what?
@jasondunbar36672 күн бұрын
@getitdone308 to not have to mess with plunger valve and hose on the intake your not using.
@yiselvasquez19919 күн бұрын
I have this same pool - thank you for the video. I’ve been having so many issues. I have no suction. Will check for air bubbles, etc. I want to install a skimmer like this one, but I don’t have a valve to shut off my other B port so I think I’ll just put a plug in it?!
@getitdone3089 күн бұрын
That really depends on your pump and how strong it is. What ultimately helped me was installing an in-wall skimmer. It was awesome! Check out my video on it.
@scottpelton76009 күн бұрын
Great idea but the wood in the water won’t last
@getitdone3089 күн бұрын
It's lasted for years. Given me zero problems.
@scottpelton76009 күн бұрын
@@getitdone308 that’s awesome
@getitdone3089 күн бұрын
It really is! Love that thing!
@scottpelton76009 күн бұрын
@@getitdone308 yeah my wife tore her meniscus she had surgery and I liked your video. It’s perfect it’ll be perfect for her once she’s healed
@peakeeee12 күн бұрын
3years later and still helping people with this! You sir need a cape as your a hero.. I was using a bucket then found your video! Thank you! 🙏
@getitdone30812 күн бұрын
Glad it helped!
@monichippewa223214 күн бұрын
Thank you
@getitdone30814 күн бұрын
Hope it helped
@ivonnetenorio752115 күн бұрын
Do the hoses tangle? How do you stop it from doing it?
@getitdone30815 күн бұрын
The hoses float and pivot around the connection on the vacuum. So tangling really isn't an issue.
@ivonnetenorio752115 күн бұрын
@@getitdone308 Every time mine runs, I have to check every 10 or so minutes because it tangles and just won't keep on running, just stays in one place.
@getitdone30815 күн бұрын
That may be a water pressure issue. If there's not enough pressure going through it, it simply won't move.
@ivonnetenorio752115 күн бұрын
Thank you!
@user-ut6kr8rf9y20 күн бұрын
THANK YOU!!!!! 🤯
@getitdone30820 күн бұрын
Hope it helped!
@brownskiiee21 күн бұрын
In order to run this pump, did you have to cut your pool lining for the pool inlet “A”?
@getitdone30821 күн бұрын
No I did not. But I did do that the following year. Check out my other video to see what I did.
@dougfreedom520021 күн бұрын
It was getting the exact same suction. You STILL only have a 1 1/4” hose opening lmao. Wow. 🤦♂️
@getitdone30821 күн бұрын
It was slightly more. It enables me to use hoses and accessories that are more accessible...and as you saw, it helped with my skimmer. It was definitely an upgrade. But if you look at my other video, you'll see where I went to full 1.5". That was way better!
@roberto300722 күн бұрын
Just curious, what kind of wood glue did you use and did you use the wood glue for the ladder inside the pool too? And if so is toxic to put it in the water?
@getitdone30821 күн бұрын
Just standard Tite Bond wood glue. I had no problems with the water/chemicals at all. My chemical levels were always fine.
@roberto300721 күн бұрын
@@getitdone308 ok thank you
@MrFelix61729 күн бұрын
Do you have a video on the steps you made for the pool , great video by the way
@getitdone30829 күн бұрын
Thank you! I do. Check my channel. Admittedly, I built the steps before I decided to make a video, so it's more of a talk through.
@kramchancel1266Ай бұрын
It didnt work for me and Idk why
@getitdone308Ай бұрын
It has to be a true siphon...meaning...NO AIR WHATSOEVER in the hose, the end in the pool has to be at a higher elevation than the other end going to the lawn. Otherwise, it won't work.
@jasondunbar3667Ай бұрын
What pump do you have?
@getitdone308Ай бұрын
I have a bigger saltwater pump. It was well worth the upgrade!
@vladimircharpentier7304Ай бұрын
It didn't work for me
@getitdone308Ай бұрын
Be sure it's a true siphon. This means NO air in the hose whatsoever, and the end of the hose in the pool must be HIGHER than the end in your yard.
@Youcantmakethisup338Ай бұрын
Great video! However, My man clean your pool before turning on that skimmer....
@getitdone308Ай бұрын
Had to keep it to show how it worked. Otherwise...yep! Pool was always clean.
@Rebecca-GLainesАй бұрын
Ive tried this sooo many times and it never worked for me :( i think its because gravity is working against me, my patio w the the water spicket is up hill quiet a bit. But i spent so much time trying to get it to work. My pool is BLACK w some NASTY floating stuff! I let it go midsummer last year, just didnt have the time, then it sat all winter, I would trust swamp water w gaters before getting in that thing! I got it all drained except the bottom 3 inches... (a lot of water!) 25×52... I still wont get in that 3 inches. Cant see through it AT ALL 😳😳🫣
@getitdone308Ай бұрын
Gravity is your enemy here. Yes, the pool has to be higher than where the water goes out the hose.
@Rebecca-GLainesАй бұрын
@@getitdone308 I decided to fill the hose, held both ends up, (hose full of water) carried it to the pool, threw one end in, and threw the other downhill, and that worked!! So it at least gave me an idea of what else to try! Thank you!
@PaleFace1974Ай бұрын
Your 1 1/2 inch adapters didn’t make a difference because you still have a 1 1/4 inch restriction at your inlets. How you created more suction was by adding the on/off valves which let you stop suction at one inlet and divert all the suction to the inlet with the skimmer. I have a similar setup. Next year I’ll be cutting out the 1 1/4 inch inlets and installing proper 1 1/2 inch fittings to create much more suction at the skimmer.
@janjaf844Ай бұрын
The internet 1.5 hose...is that what was connected to the B spot on pool? I wish I could send you a pic of my setup so you can help since it's pvc. I have a leak and no idea how to fix it
@jillsey45Ай бұрын
Thankyou SO much!! I started bailing with a bucket and was like " Oh Heck No"! Lol This worked great! Plus, I would have tried to use my mouth if I hadn't seen this way!!! Lolol We've all done it! 🤢 Thanks again
@getitdone308Ай бұрын
Glad it helped. That's exactly what to avoid!
@Smarty31024Ай бұрын
How come it didn’t work for me??
@getitdone308Ай бұрын
It has to be a true siphon. Meaning NO/ZERO air in the hose. The end IN the pool has to be a higher elevation than the other end (so gravity can take place). I'm literally doing this right now in my hot tub. Also, depending on your hose, some of the newer ones are 1-way (I learned that the hard way).
@nycoleholbrook59562 ай бұрын
Thank you for this video! I need some more help on how to get the inlet to work on the inside of the pool. I have no idea how to adapt it😢can you help? Also I’m trying to do the same mods that you did and also a first time pool owner. I don’t want to mess it up, I need help🙏🏻
@getitdone3082 ай бұрын
I do have a series of videos, so check them out. The next year I upgraded to full 1.5" hoses and it was a game changer!
@jojosamia42742 ай бұрын
I am tired of tadpoles. I just found tons of them in my pool after the cover went down in the water. I want to just drain it out, wash it then refill 😢😢
@getitdone3082 ай бұрын
This process will help!
@carolswords21362 ай бұрын
Can you tell me how you converted jet nozzle from 1-1/4 to 1-1/2 from jet nozzle to hose at pool side?
@getitdone3082 ай бұрын
If you're talking about the hose that puts water IN the pool...it's already 1.5".
@carolswords21362 ай бұрын
@@getitdone308 mine is 1-1/4 bestway pool
@allyakapinky2 ай бұрын
Closing one of the outlet valves doesn't cause your pump to work harder? I'm wanting to upgrade our hoses but afraid it'll strain the sand pump
@getitdone3082 ай бұрын
I never had that problem. That said, I upgraded further and did a cut out skimmer and it was awesome! Check out that video on my page.
@allyakapinkyАй бұрын
@getitdone308 we upgraded the hoses from 1¼in to the 1½in hoses. Now my pump pressure is high. Backwash and rinse help for about 30mins to and hour and pressure goes back up. Could my pump not be big enough to handle the upgrade?
@getitdone308Ай бұрын
That definitely could be the case! I upgraded my pump to a bigger one.
@darrinterrell47302 ай бұрын
Nice stairs in to the pool . Do you got video on them
@getitdone3082 ай бұрын
Yes I do!
@ggc11312 ай бұрын
thank you so much for theses videos amazing i have been looking for this and no one has the video that i exactly needed to make this work thank you thank you please keep making more of them 👍
@getitdone3082 ай бұрын
Hope it helps. Check out my other video where I upgraded even further.
@beer_bass2 ай бұрын
Great video man! After the 1st year with a 14’x48” Bestway pool, we definitely needed a skimmer. Then realized I had to up grade to a bigger filter. I didn’t want to cut any holes into the pool. I bought the wrong adapters. This video is really helpful. Thanks!
@PaleFace1974Ай бұрын
Just add the on/off valves. No need for the adapters since you’ll still have 1 1/4 inch restriction at the inlets. He created more suction by turning off the valve without the skimmer!
@getitdone308Ай бұрын
The on/off valves need the adapters. They're 1.5. They won't fit on the 1.25 inlets.
@ms.quanamonae2 ай бұрын
What setting did you put your sand filter pump on ?
@getitdone3082 ай бұрын
There's only 1 setting really..."on".
@sherrymchatton39282 ай бұрын
Thank you so much!! I was stressing on how I was going to manage this by myself. This is brilliant!
@getitdone3082 ай бұрын
Hope it helps!
@jlvsm525812 ай бұрын
Where you get the eyeball inlet I have the same pool did all the upgrades like you did all I need is that inlet
@getitdone3082 ай бұрын
It came with the upgraded pump I purchased.
@jacobeskridge81132 ай бұрын
I have the same pool. Did it take much effort or isn’t it complicated to put in an eyeball jet outlet? Thanks for the video. It was great.
@Tungoon2 ай бұрын
Are the steps going into the pool 10 inches high to get to 50 inches on top platform thanks
@getitdone3082 ай бұрын
I'm pretty sure that was the case. You can make them as close as you want.
@cd6532 ай бұрын
Are you suppose to take this type of pool down every fall? My neighbor never takes her pool down in the fall. She has this same pool. Come fall she empties her pool out 1/2 way and puts a cover on it. Then come spring She empties it out cleans it and refills it. So far she's had no issues. We live in Ohio...
@getitdone3082 ай бұрын
You don't HAVE to. I chose to because I had a dedicated storage space for it. That said, I always didn't rust how well they'd last in the Texas summer (here). The more it's up and out in the off-season, the more chances it has to get hit by something (kids, trees, etc) and rip or get punctured. I've seen 50/50 people keep it up and winterized vs. store it.
@nikkiforeman16352 ай бұрын
For plunge valves
@getitdone3082 ай бұрын
?
@nikkiforeman16352 ай бұрын
Link
@getitdone3082 ай бұрын
Do you have a question?
@nikkiforeman16352 ай бұрын
Where’s a link for it
@getitdone3082 ай бұрын
Intex Above Ground Plunger Valves with Gaskets & Nuts Replacement Part (2 Pack) a.co/d/5rzXGn1
@nikkiforeman16352 ай бұрын
Links?
@cliveagate2 ай бұрын
Awesome, thank you. Just what I've been looking for :). A quick question; on the pool side, did you find the preservative in the wood contaminated the pool in any way?
@getitdone3082 ай бұрын
I get asked that a lot. Truthfully...no. I didn't see any noticeable impact to my pool. It's a salt water system. Also, I was very focused on my water/chemicals. I didn't have to do anything different to keep it all balanced. It was the BEST upgrade I did for my pool, hands down.
@cliveagate2 ай бұрын
Thank you for your quick reply, much appreciated 🙏
@wendyamaya53862 ай бұрын
Thank you so much!! This worked like a charm 🎉
@getitdone3082 ай бұрын
Glad it helped!
@CarolsCreativeCorner2 ай бұрын
Wood in the pool? Won't it warp, splinters?
@getitdone3082 ай бұрын
In the 3 years I had it...never a splinter. To be fair, the 3rd year when I was installing it, I noticed a spot on the top that may cause a snag, so I sanded it down smooth. Easy fix. It didn't warp either. I did put a kitchen rubber mat on the pool floor under the legs so it didn't rub. Honestly, it was THE best upgrade I did for my pool.
@kristanorman83162 ай бұрын
I know this is a few years old, but can you tell me what eyeball inlet you used? I’m assuming to fit a 1 1/4? I’m just a girl trying to change a pool filter pump lol so I’m sorry if I’m sounding dumb.
@getitdone3082 ай бұрын
The eyeball inlet I used came with the Intex pump. Later, I upgraded to an in-wall skimmer/filter and got a different/better eyeball inlet. I have a video for that as well.
@richarddavis17243 ай бұрын
The way you have the new hose is only pulling water out by the skimmer to pump, you should have skimmer and one of the other ports pulling water to pump
@getitdone3083 ай бұрын
There wasn't enough suction to keep them both open. Also, that pool was made to pull from 2 smaller hoses. This allowed to pull from 1 larger hose.
@DGKJhayTV3 ай бұрын
It worked all the way up until the end. Too much to start cleaning and a too much to flip the pool. Probably will just have to wet vac it out.
@getitdone3082 ай бұрын
I had to do that once the water level was well below the diameter of the hose.
@najibmac5283 ай бұрын
Try ading lamp to fountain
@getitdone3083 ай бұрын
That would be cool! Needs to he safe though. Water and electricity don't mix.
@victoriashaw63654 ай бұрын
I couldn’t get this to work 😕. Tried and tried. Moving and need to get rid of the pool. No time to order more pumps so looks like we’ll have to slash the sides open and toss it 😞
@getitdone3084 ай бұрын
Siphoning is dependent on 3 things: 1. The hose stays full of water (no air...at all) 2. The hose is submerged in water where the water goes in (in your pool). No air. 3. The other end of the hose is not elevated higher than where the water goes in (gravity helps propel the water) Can you confirm that's the case?