Рет қаралды 364
Wheelbarrows are such a pain in that they need you to put in all the effort.
My aim with this project is to produce the best budget electric wheelbarrow that costs less than £200 ($275). I use second hand Lithium ion cells from old discarded laptop batteries as my power source and a second hand wheelchair motor to power it all with.
In this episode we are all about how to make a 24v Lithium ion battery pack (arguably the most expensive part of the whole build). I leave no part of it out and I lay bare my 'limited' knowledge on how to do this. How does it turn out? Well stick around and see............
Apologies for the number of times I say "Basically!" throughout the whole video!
Chapters:
0:00 Intro
2:34 How to test your battery cells
12:17 Balancing your cells ready for grouping
17:22 Assembling cells into a pack
20:40 Cutting nickel strips to length
20:07 Spot welding the battery pack
32:26 Adding a BMS to your battery pack
47:19 Shrink wrapping your battery pack
51:45 The ending
Some of the parts and tools used in my videos:
36v 350W Speed controller with battery level display and speed level control :
ebay.us/t8WOS2
Ignition Switch:
ebay.us/18oWxI
The actual Go Kart used in the build:
ebay.us/7GGuFA
Remote activated relay (For killing the power in the event your child tried to make a run for it):
ebay.us/drH4ep
18650 battery charger/tester (Opus BT-C3100):
ebay.us/FMnvbT
Oscilloscope Multimeter:
ebay.us/qGwZA3
Spot welder:
ebay.us/tnaTbk
Nickel plated strip:
amzn.to/3yr1FD3
Music supplied by Epidemic Sound:
www.epidemicsound.com/referra...
EbikeSchool.com for all the knowledge on building these battery packs:
/ @ebikeschool
To build and balance your battery packs you need this site:
www.repackr.com/