converting my MTB to ELECTRIC | tongsheng tsdz2 from Yosepower

Рет қаралды 12,422

Күн бұрын

Get $10 off everything from yosepower with the code "DAZproject-10" from the link below (also helps the channel, thanks):
yosepower.com/?ref=cfgqfav8
in this video, i'll convert my sisters' bike to electric thanks to the help of yosepower which sent a tongsheng tsdz2 conversion kit to try out.
grab your favorite drink and enjoy this review!
follow me on Instagram:
daz.project...
music:
Aurora by Sappheiros | / sappheirosmusic
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY 3.0
creativecommons.org/licenses/...
Otjánbird Pt. II by Spheriá | / spheriamusic
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY-SA 3.0
creativecommons.org/licenses/...

Пікірлер: 39

@zagonicsaba Ай бұрын

The previous version of this motor "Thongsheng 1" suffered from a manufacturing problem. The main axel had grooves on both sides, that caused the break of the axel at those grooves, remaining without a pedal in the middle of nowhere. Do you know if this issue was solved. Can you make a teardown video, so we can see how the axel looks on this version? Thanx.

@mksmith713 6 ай бұрын

What did you do to mitigate thew rear derailleur cable under the BB? Every bike I've ever done has the cable guides in the way and had to be ground nearly flat to slide the motor in.

@utubeape 2 ай бұрын

personally I stripped the plastic housing off and filed a slight groove less than 1mm deep at the lowest part of the bottom bracket, and piled in some grease

@mksmith713 2 ай бұрын

Oddly, I started doing. Doesn’t really matter too much, no one switches that gear anyway. They put it in third and leave it there forever.

@viliammajer8291 3 күн бұрын

What frame is it please Aluminum or carbon well thank you

@theredmaster_superbee 5 ай бұрын

Hello, I am interested in "tongsheng tsdz2b" 750w, but I want to know if there are brakes for 700c racing or road bike type handlebars, or bullhorn handlebars, the brakes that cut off the current from the motor for greater safety. Can you please explain to me if they exist? I also want an accelerator and I see that they don't sell batteries... what battery should I buy? Thanks

@DAZprojects 5 ай бұрын

They do sell batteries, brakes with sensors exist and you can't find them on AliExpress together with a thumb throttle

@jackpiki 9 күн бұрын

Molto bellino, dove sono i trail che mostri alla fine??

@dannyd976 10 ай бұрын

Currently starting the same project on a full suspension mountain bike. Because of the rear swing arm you are unable to use the fixing bracket that prevents rotation of the motor in the bottom bracket. Have you had any issues not installing the fixing bracket on this bike? Have you done anything to mitigate some of the risk?

@DAZprojects 10 ай бұрын

I had zero issues, just make sure to tighten the lock ring every once in a while

@dannyd976 10 ай бұрын

So I did the upgrade. The motor wants to rotate ccw when looking at the right pedal crank. So the motor wants to rotate into the downtube. My lockring did eventually work loose when riding and the motor nearly broke a hole through the downtube of my aluminum bike frame. To address this I placed a shim between the downtube and the motor. 3d printed it out of ABS filament with 100% infill. Then tighten the locknut well.

@DAZprojects 10 ай бұрын

@@dannyd976 good job 👍

@kevinwilliams8502 9 ай бұрын

@@DAZprojectsI'm same, never fitted the bracket on 5 bikes, never had an issue

@CM-1723 10 ай бұрын

Did you get the 350watt motor ? Is it powerful emough for mountain biking , whats it like up hills etc ?

@kevinwilliams8502 9 ай бұрын

I got the 36v 350w version and think it's great, goes up 20% + hills with some effort from the rider, I do have a 42tooth cassette on the back but I got a 52t on the front with adapter for the offset

@clarenceniles1934 2 ай бұрын

What battery did you us and where did you get it ?

@YOSEPOWER 4 күн бұрын

Hi, the battery used in the video is " YOSE POWER 36V 10.4Ah Original Li-ion Cell Lithium-ion Battery Electric Bicycle Bottle New Black DIY". However, it is out of stock now. Maybe you could click the link in the description and take a look at other batteries from our online shop. Thank you very much.

@Hardware244 10 ай бұрын

Wheres the kit? its not even on the website that you linked

@YOSEPOWER 2 ай бұрын

Hi, the mid-motor kit is in stock now. Thanks for your support.

@kubakarwecki2016 Жыл бұрын

You convert Normal size motor or 100mm ?

@DAZprojects Жыл бұрын

Normal size

@JelckedeBoer Жыл бұрын

Would it be possible to adapt this motor to a 90mm frame? Do you need a different axle allso?

@DmitrySkvorcov 9 ай бұрын

Manual how to kill cables...

@durk541 Жыл бұрын

You should really be using a torque wrench on those cranks

@Shishou_Shi 9 ай бұрын

Not everyone has that kind of money for a rarely used tool. The cheap ones are often off by over 20%. For cheap: Better to use a luggage scale and calculate your lever length to get the right torque.

@durk541 9 ай бұрын

@@Shishou_Shi you can just get a beam type torque wrench that never needs any calibration.... I've had mine for 10 years. The click type from harbor freight is decent I use the 1/4 inch click type to rebuild small engines(rod bolts) with no issues but I had the 3/8 click type and never got it to work properly

@Shishou_Shi 9 ай бұрын

@@durk541 harbor freight?

@kevinwilliams8502 9 ай бұрын

Never used on on the 5 motors I've fitted , never had any issues