Cool RGB Fans BUT.... be quiet! LIGHT WINGS PWM high-speed ARGB Fans

Cool RGB Fans BUT.... be quiet! LIGHT WINGS PWM high-speed ARGB Fans - Unboxing and Review

Рет қаралды 23,942

2 жыл бұрын

💥 Buy now 💰 amzn.to/3VHhbZ0
💥www.tftmax.com 💥 TECH MAX TRADE SHOW! 💥
Cool RGB Fans BUT.... be quiet! LIGHT WINGS PWM high-speed ARGB Fans - Unboxing and Review
✳️➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖✳️
Always support your local independent Tech Store!
UK 💥 Buy now 💰 amzn.to/3VHhbZ0
✳️➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖✳️
LIGHT WINGS
120mm PWM high-speed Triple-Pack
IMPRESSIVE LIGHTING, SUPERIOR COOLING
Three Light Wings 120mm PWM high-speed offer impressive illumination for a vibrant unique look, strong performance and quiet operation with efficient cooling.
• Three fans included
• ARGB lighting on front and rear
• Multiple colors and modes for an individual look thanks to 18 LEDs
• ARGB Hub allows synchronization of up to six ARGB components
• Nine silence optimized fan blades for high pressure reduce noise-generating turbulences
• Remarkable performance-to-noise ratio with 31dB(A) at 2,500rpm
If you are looking for quiet case fans with an impressive look from every angle, these three Light Wings 120mm PWM high-speed are your fans of choice.
✳️➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖✳️
Subscribe bit.ly/3jDb85s
✳️➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖✳️
Test System #1
CPU: Intel 12900k amzn.to/3FoJku3
Motherboard: MSI Z690 A Pro (DDR4 and DDR5 Versions) amzn.to/2YYjEVKi
RAM: Adata 4800Mhz DDR5
(optional) Graphics Card: Zotac 3070 locally.link/EZhN
Test System: #2
CPU: Intel 10700KF locally.link/0pig
Motherboard: Gigabyte Z490 Vision G locally.link/qQti
RAM: Lexar Hades RGB 32GB Kit (2 x 16GB) 3600MHz locally.link/d2hj
Graphics Card: Zotac 3070 locally.link/EZhN
✳️➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖✳️
Streaming/editing setup
Stream/liveshow Software = Restream restream.io/join/n3EXE
Streaming Mic = Blue Yetti X = locally.link/vEbY
WebCam = Canon DSLR 70D locally.link/cVlp
Pc Case = Cooler Master H500P Mesh RGB = locally.link/vwVO
CPU = AMD Threadripper 3960X 24Core48Thread locally.link/Zmp7
GPU = 3080Ti Zotac locally.link/036w
RAM = 64GB Kingston HyperX Fury 4x 16gb locally.link/570h
✳️➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖✳️
Follow us on:- 🖥️
💚 KZfaq kzfaq.info?...
💙 TWITTER: / techfortechs
🧡 INSTAGRAM: / techfortechs
💜 FACEBOOK: / techfortechs
🌐 WEBSITE - www.TechForTechs.co.uk ✳️➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖✳️
➡ Contact us
✉ Email for Business Enquires: info@techfortechs.co.uk
🌐 www.TechForTechs.co.uk
✳️➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖✳️
Tech for Techs offers unbiased tech reviews for computer shop owners and IT professionals as well as a KZfaq-based review for consumers
Category
Science & Technology
#TechforTechs #Tech #Computerreviews

Пікірлер: 56

@ginofoogle6944 2 жыл бұрын

the hub is handy for someone who doesn't have multiple rgb headers on the motherboard but still wants to power up 6 led fans (like i do) so in my case (pun intended) it's handy..

@LostinGaming0 2 жыл бұрын

The hub can be used as a "center" for your ARGB lights. For example cooler master liquid cooler's ARGB lights can be connected to the controller. Many motherboards still has only one ARGB header. Meaning you would not be able to connect both these fans and an ARGB liquid cooler to your motherboard. With the controller you can. Also maybe some extra led strips which are ARGB too. And you can sync them up through the motherboard software. Which looks absolutely amazing in my opinion. Also you can purchase a be quiet pc case hehe :P most of those I think have a FAN controller too on the back. As do mine which is the dark base pro 900 rev 2. those have about 5 fan PWM connections. The base Sileng Wings 3 fans are connected to that in fact. So on my motherboard only the CPU fans and the one PWM for the FAN controller are connected. Nothing else.

@user-co7if1pr3w 2 жыл бұрын

I could not connect be quiet! LIGHT WINGS PWM high-speed ARGB Fans to the controller on my case. For LIGHT WINGS it is necessary to connect right into motherboard ARGB connector.

@etycreyp7800 9 ай бұрын

So even if I dont have any ARGB slots on my motherboard, It will still work with the hub then?

@LostinGaming0 9 ай бұрын

@@etycreyp7800 No. You need to have at least 1 ARGB header on your motherboard which connects to the HUB. Think of the HUB like as an extender. You connect the HUB to that one ARGB header, and you get multiple extra options to use, all of them controlled by the motherboard's software, example in case of Asus motherboards = Armoury Crate. I meant by my previous comment that, in case if you have more than just these 3 Light Wings. Let's say you have 3 case fans too which are also ARGB compatible, you can connect them to the HUB, and then the HUB to your motherboard's ARGB header and you can control all of them. Case fans + Light Wings. But you definitely need at least one ARGB header. Although in your case if you have only RGB, they might work, but I think the fans would only light up with one color. Not sure if you would even be able to change their color through the motherboards software, as then HUB requires the ARGB header to deliver the commands, if we can say that. So best to have at least one ARGB, multiple is even better.

@bjyoungblood 6 ай бұрын

The value of the hub, even without fan headers, is that it provides you extra power from the PSU to ensure that all of your fans get the power they need. Having a large number of fans daisy chained risks fans at the end of the chain not getting as much light or having the lighting effects behave very strangely. It's not just about having more connection points. For example, my motherboard aRGB port has a maximum of 15W. 4 of these fans would exceed that limit at certain settings.

@astanisystems 5 ай бұрын

This is so true! I daisy chained 4 fans and a 24-pin angle ARGB adapter to one header, and 2 fans didn't light up properly, and eventually everything shut down afterwards. I tested just 3 fans without the 24-pin ARGB adapter on one header and it worked fine. That included ARGB hub is in such a case a godsend, especially if you're trying to power strips, adapters or argb cables alongside with your fans.

@recordatron Жыл бұрын

I recently picked a pack of these up in 140mm and I had the same concerns you did. Fortunately for me, my board has ample fan headers but I also already have a corsair rgb/fan hub that came with my AIO which has both fan and RGB inputs so I don't see why the be quiet one doesn't also. Anyway, spot on review!

@davidprosser9536 Жыл бұрын

Just came here after buying that kit thinking exactly the same, I thought it's missing the cable to join the power up, especially for the price they cost it's crazy that they didn't put one in the box. I'd rather the power cable than the useless box for the RGB any day of the week

@nicktayloriv310 Жыл бұрын

I like the hub being I have 6 fans in my Pure Base 500DX case (3 front 2 top 1 rear) and I'm using the fans that came with my Scythe Fuma 2 (no RGB) keeping my Ryzen 9 in check. They do a great job keeping my system cool and my temperature probe shows it's a smidge cooler than the fans I had in it but it's much quieter. Now I can actually hear the 3080's fans over these when it ramps up. The problem that I've had in the past with "Daisy chaining" RGB fans is the last two in line would flutter some like they weren't getting enough juice. With the SATA putting the juice into the "box" fixes that. But with me lights are secondary to function but again that's me. They do a good job of getting that heat out from the four sticks and probably helping that teenie fan over the VRM's on the Gigabyte motherboard. I'm using Aorus RGB Fusion for RGB control. ✌🏽

@MrAeroTuck 2 жыл бұрын

I really like these fans...so nice video! can you please reccommend a controller that i can use to connect say 9 fans to my z690 motherboard

@kons37flyingreaper41 2 жыл бұрын

When you buy the 3 rgb be quiet fans box there is an included fan hub. So if you buy, say 9 (3 x 3 fans) you get 3 hubs.

@astanisystems 5 ай бұрын

@@kons37flyingreaper41And if a PWM synchronization is necessary, a PWM splitter is dirt cheap.

@hanfcookie39 2 жыл бұрын

this is the most british looking guy ive seen today

@TechforTechs 2 жыл бұрын

But I'm not British........well yeah ok i am, thanks for watching

@astanisystems 5 ай бұрын

Bruh, PWM and ARGB splitters are dirt cheap. I bought a 1-4 PWM splitter for 5 euros with free shipping, and 1-3 ARGB splitter for 4 euros(free shipping). I honestly would just prefer that back illumination ring was thicker, but still it's a banger of a fan, and yes, really damn quiet. Considering how Corsair and Lian Li are expensive AF when it comes to fans, these are IMO excellent budget high performing fans. Noteworthy mention also goes to Cooler Master MF Halo Gen 2 fans which are slightly cheaper but also perform well(not as quiet, but better RGB).

@casual_ayks8987 2 жыл бұрын

what is the software you are using to control the RGB?

@kingofkings4845 2 жыл бұрын

the Mobo Software like RGB Fusion or Asus Aura Sync

@angelalmalaq 2 жыл бұрын

HOW I CAN CONTROL THE LIGHT ARBG BECAUSE I BYE IT WHIT ARCTIC COOLER BUT NO CONTROLLER FOR ARGB ?

@user-co7if1pr3w 2 жыл бұрын

I have same issue. I could not connect be quiet! LIGHT WINGS PWM high-speed ARGB Fans to the controller on my case. For LIGHT WINGS it is necessary to connect right into motherboard ARGB connector.

@danclifford9462 2 жыл бұрын

With the peak current being .45 Amps daisy chaining 3 fans to a motherboard header may not be the best idea

@ra4239 2 жыл бұрын

How about 2? Is it ok?

@dylandetaeye Жыл бұрын

I have 2x 3 fans daisy chained running into the arg hub and also one extra fan. I think it's fine.

@Fishbait075 2 жыл бұрын

Your links dont link to the products in the video.

@TechforTechs 2 жыл бұрын

products only just come out, awaiting official links to update.

@Idlepit2 2 жыл бұрын

My motherboard has 8 4pin fan headers and only cost £130, how can they get away with 3 on a £350 board? I'd be more angry at the mobo manufacturers rather than be quiet for not adding a £3 splitter

@TechforTechs 2 жыл бұрын

Thanks for the comment, a lot of micro boards, ITX boards and older boards do not have a huge number of fan headers, also cheaper and and older boards do not always have a lot, we have seen and reviewed a few that only have two headers.

@TechforTechs 2 жыл бұрын

Always support your local independent Tech Store! UK 💥 Buy now 💰 amzn.to/2Zc0mfA *ad International 💥 Buy now 💰 amzn.to/3xelzlR *ad

@csabauri351 2 жыл бұрын

I disagree to include ARGB controller . I dont want to pay extra for a controller i will never use . Those who dont have argb header on mobo can buy seprarate controllers .

@penedrador 2 жыл бұрын

The price for a 3-pack with controller is cheaper than 3 single fans without controller, at least in my country rn (germany)

@jojoavairf567 2 жыл бұрын

You dont pay extra for the tripplepack with hub. You get the argb hub on top with the fan tripplepack

@csabauri351 2 жыл бұрын

@@jojoavairf567 I see it differently . Bundle packages are always cheaper ,since u only pay 1x for packaging /shipping . So this triple pack could be cheaper if they dont include the HUB .And an included (real) argb controller would rise the price even more .

@davidv.8765 2 жыл бұрын

It's not a controller, just a hub worth maybe 5$, and is more cheaper if you get this pack, 3 fans for almost price of 2.

@m.g.debruin8294 9 ай бұрын

Buy a OCTO aqua computer fan hub you can easy connecting 24 fans to change fan speed and light.I don't want Fans and RGB in my motherboard fan headers.

@svaeon Жыл бұрын

Definitely if you got money to buy those fans you buy a premium be quiet case that has connectors. I am sure now problem is solved. I bought Dark Base Pro rev.2 and for sure those fans are especially for those type of cases.

@ghostt5135 Жыл бұрын

Bro adaptor with 4 pins and 6 slots cost max 3 euro or 2 so i dont see a problem with that 4 pins me i have adaptor and i can connect 6 fans easy on my pc

@lukasritter2544 2 жыл бұрын

so people struggle with 3 fans? ive got 17 fans inside my corsair 5000x :D

@penedrador 2 жыл бұрын

17? How?

@lukasritter2544 2 жыл бұрын

@@penedrador internal mounted fans + push pull config for radiator :D + 3D printed adapter for the pcie back slots to mount a 120mm on the outside

@penedrador 2 жыл бұрын

@@lukasritter2544 did help with temps? Sounds a bit like overkill ;)

@lukasritter2544 2 жыл бұрын

@@penedrador it did help indeed my 6800xt midnight black reference model runs on 69C with 2600mhz overclock and my 5950x does not exceed 66C under full system load(gpu and cpu 100%) if gpu load is low it hovers arround 57C max 20C room temp without fan @ pcie slots 71C for gpu so it helps and the internal fans to adjust the directions of the airflow do help too 2 C difference if they do not run ohw and all case fans except rad fans are controlled via thermal probe righz before the radiator so if its a hot day or gpu heats the air up they run faster to keep temps stable no matter how high the room temp is

@lukasritter2544 2 жыл бұрын

also I do love fans I like their movement

@SMADSteve 2 жыл бұрын

The ARGB hub is great as it removes load draw from the mother board and you wont get any voltage drop. Anybody spending this kind of money on a set of fans will prob also purchase a case with a PWM hub.. your comments sir are not valid.

@dylandetaeye Жыл бұрын

I had some fan splitters from my old crappy fans. It's doing the job great. These splitters aren't expensive. And if u buy a be quiet aio, u get a hub with 6 argb connectors and 6 pwm headers.

@enhncr Ай бұрын

U missed the whole point of these fans. Rgb controler is a stupid idea. It limmits you to using it Having no controller gives you chance to run the whole thing from mobo!!!

@davidv.8765 2 жыл бұрын

Almost all mobos over 100$ will have over 3, 4 fan headers...

@rubenTR309 4 ай бұрын

who doesnt have spare fan splitters lying about? a stupid thing to complain about

@akbharnucsgubt5040 Жыл бұрын

Maybe u should mention that u get the triple pack for less than 3 single packs and the hub is free on top ... so u have a discount when u buy 3 and get the hub ... what's the matter? i don't see the problem ... rly ... why r u complaining so much about a FREE HUB ?

@Mapantz1 2 жыл бұрын

Be Quiet! failed with the RGB on these fans. The diffuser is poor, which means you can easily see the individual LED's. Overall, they look like the cheap & nasty Chinese knock-off fans you get on Amazon. I terrible for always changing the fans in my set up, because something news comes out. However, Alpenföhn® Wing Boost 3 are hands down, the best aRGB fans on the market. I can't find anything with RGB on it that can match the static pressure or airflow on them.

@csabauri351 2 жыл бұрын

I Had WB3 ARGB ,now i use Arctic P12 argb . In my opinion the p12s are a bit better in terms of performance/noise . WB3 on the other hand has better quality ,and I imagine they would last longer.