Cool Tools | Soldering Overview by Karen Trexler | Learn the basics of soldering jewelry

  Рет қаралды 3,150

Cool Tools Videos

Cool Tools Videos

Күн бұрын

Click here for the tools and supplies used in this video: cooltools.us/collections/sold...
In this video, Karen offers an introduction to soldering. Soldering is a wonderful skill for any maker, but especially for metal clay artists and post fabrication. In this overview, Karen walks through what is soldering, soldering skills and how to execute them.

Пікірлер: 9
@BEEtheJOY
@BEEtheJOY 6 ай бұрын
Karen is an excellent instructor. This was a good lesson.
@flyingcheff
@flyingcheff 7 ай бұрын
The hottest part of the flame is outside the "blue cone" beyond the fuel rich (cooler) blue cone area. Direct heat to where the heat is going. Also, just a helpful tip, placing solder inside the bezel when joining it and especially when soldering the bezel onto the back plate will eliminate solder scarring and facilitate clean work.
@user-xl3ev8pb8q
@user-xl3ev8pb8q 4 ай бұрын
Great video! Thank you for sharing. You give very clear instructions and explanations as to why you use different materials. 😊
@flyingcheff
@flyingcheff 7 ай бұрын
Refreshingly accurate description of what happens to join two pieces of metal (with solder). I shall assign this video to my beginner students. I would love to see (hear) the explanation (by someone other than myself) of why hard solder can be used for all joins, consecutively. Thanks!
@Chungustav
@Chungustav 7 ай бұрын
Great explanation
@jilla4334
@jilla4334 7 ай бұрын
Question - How do you keep the solder tips on the tube from drying out?
@danasteindince1076
@danasteindince1076 7 ай бұрын
Adding scotch tape to the tip and closing it off has worked for me. Paste hasnt dried up
@cooltoolsvideos
@cooltoolsvideos 7 ай бұрын
The solder paste stays pretty well in the tube as is. Some people put sewing pins down the tips if they leave the application end on to prevent drying. Hope this helps!
@jilla4334
@jilla4334 7 ай бұрын
You must be using fine silver for the small pieces, as you are not showing that there is a need to pickle the small piece before soldering to the larger one
Я обещал подарить ему самокат!
01:00
Vlad Samokatchik
Рет қаралды 9 МЛН
MISS CIRCLE STUDENTS BULLY ME!
00:12
Andreas Eskander
Рет қаралды 20 МЛН
UNO!
00:18
БРУНО
Рет қаралды 3,3 МЛН
Deep Dive: Pickle and Soldering | Jewelry 101
33:04
Jewel School
Рет қаралды 112 М.
HOW TO SOLDER A PENDANT with Soldering Iron | CRYSTAL PENDANT SOLDERING
30:31
I opened a Laser Engraving Store and Here is my advice...
11:52
JHCustomengraving
Рет қаралды 6 М.
5 SECRETS TO PERFECT SILVER SOLDERING!
13:47
Greg Greenwood
Рет қаралды 253 М.
Apply Powder Coat to the Inside of a Ring by Karen Trexler | Cool Tools
8:55
Print-Wave Metal Casting: A Different Approach to Metal melting
17:15
Shake the Future
Рет қаралды 55 М.
Jewelry Soldering do's and dont's - solder 101
11:55
GomeowCreations
Рет қаралды 124 М.
Será Que a FITA vai Grudar ela na PAREDE😱 #shorts
0:44
Lucan Pevidor
Рет қаралды 67 МЛН
СУШИ ИЗ АРБУЗА//ПРОВЕРКА РЕЦЕПТА
0:24
ОЛЯ ПЕРЧИК
Рет қаралды 1,6 МЛН
😳 Это ПРЕВРАЩАЕТ всё в ПИЦЦУ !
0:28
Настя, это где?
Рет қаралды 8 МЛН
Kids' Guide to Fire Safety: Essential Lessons #shorts
0:34
Fabiosa Animated
Рет қаралды 1,1 МЛН