Рет қаралды 12,147
Hey CNC Woodworkers!
This is how I made my ATC Tool Rack for my Automatic Tool Changer spindle on my Avid CNC. It's made out of wood, using stock I milled from downed trees, so it was "free". I cover considerations on where to place the tool rack on the CNC machine, including how to orient the tool holder or tool fork, depending on how you are using a dust shoe for dust collection (ie: a slim dust boot to fit over the rack versus docking or moving the dust boot aside). I talk about 3D printing a tool pocket rack, and why I didn't go that route. Finally, I show how I machined the rack out of wood, so you can follow along and make your own! I am using an Avid CNC, but you could easily use this same design on any other regular DIY wood CNC machine. This design works well for all ATC spindles: CNC Depot's S30 / S30C, HITECO QD-1F, and other import spindles.
Tool Rack CAD / STL Files (Free download):
www.corbinsworkshop.com/shop/...
3D Printable Slim Dust Boot (Free download, v2): www.corbinsworkshop.com/shop/... (and the build video: • CNC Build Ep 10: Print... )
3D Print / Printable Holder (Free download):
www.corbinsworkshop.com/shop/...
Pre-made Slim Dust Boots:
www.etsy.com/shop/OneGuyInAShop
Pre-made steel tool rack:
www.abshercnc.com/products
Amazon Tool Forks: amzn.to/3NVTzO1
CNC Depot Tool Forks: www.cncdepot.net/product-page...
CNC Build Playlist: • Avid CNC Build
Ep 1: What CNC To Buy - • CNC Build Ep 1: What i...
Ep 2: Welded CNC Table - • CNC Build Ep 2: How to...
Ep 3: Making an Avid CNC Precise: • CNC Build Ep 3: How to...
Ep 4: How to Tram a CNC: • CNC Build Ep 4: How to...
Ep 5: Automatic Tool Changer: • CNC Build Ep 5: How to...
Ep 6: ATC Tool Rack Build - • CNC Build Ep 6: Automa...
Ep 7: ATC Setup in Mach 4 - • CNC Build Ep 7: Custom...
Ep 8: ATC Tool Heights - • CNC Build Ep 8: How to...
Ep 9: ATC Post Processor Setup - • CNC Build Ep 9: ATC Po...
Ep 10: 3D Printed Dust Boot - • CNC Build Ep 10: Print...
Ep 11: Improving the Avid CNC Table - • CNC Build Ep 11: Impro...
Ep 12: CNC Spoilboard - • CNC Build Ep 12: Make ...
Thanks everyone!
Corbin Dunn
www.corbinstreehouse.com // Blog
www.corbinsworkshop.com // CNC File Downloads and Products
Chapters:
0:00 Intro
0:25 Where To Put It?
1:45 Dust Boot Considerations
4:21 Tool Length Considerations
5:58 3D Printed Options
6:20 Wood Rack Build
9:28 Conclusion
#cncwoodworking #woodworking #cnc