Coriolis Effect Radial Flow Turbo Manifold

Coriolis Effect Radial Flow Turbo Manifold - Return of the Bedford EP3

Рет қаралды 149,848

3 жыл бұрын

On this episode of The Skid Factory we continue to sort through the Bedfords parts and fit up the Manifolds, Turbo and Piping.
Like these tunes? Al’s 12 year old Son made them! Checkout his channel: • Analog Mayhem
Want to go fast like Millsi? Give Hughes a call www.hughesperformance.com
Does Bosch grease work on Denso Spark Plugs? patrap.com.au
Turbo manifold Fabrication by Millsi's brother Dave, check him out here : / millerchassissydney
Ceramic coating by Damon at The Coating Garage :
/ thecoatinggarage
Coils, fuel rail and injectors sourced via Golebys :
www.golebysparts.com.au
Want to Support the show? www.theskidfactory.com
If you like what you see then Share it with your friends and don't forget to subscribe and hit the bell for Weekly episodes!
For updates keep your eye on The Skid Factory (TSF) here:
woodrigos?...
theskidfact...
/ theskidfactory
turboyodats...
/ theturboyoda
Please note: We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy.
#Turbo #Bedford #Barra

Пікірлер: 384

@theskidfactory 3 жыл бұрын

If FknMillsi broke your mower, what would you do to fix it? www.theskidfactory.com

@jimmyg5408 3 жыл бұрын

Find another Millsi 😂

@FMuscleZ28 3 жыл бұрын

Fit a a 1,500hp Barra in it...

@justinyates1154 3 жыл бұрын

Build a racing-ish mower, not class spec just fast af, seems like the logical thing to do in that situation.

@rohangearing6999 3 жыл бұрын

Putting a mower cutting deck under the Bedford 🤣

@Soraar 3 жыл бұрын

Chuck it in the f**k it bucket, realize that's a waste, retrieve it from said bin, fit a turbine housing to the back of it, of course. Proceed to mow the ever living crap out of any vegetation that dare stand in your way until engine gives. Call it 'science'.

@AttilaThebung 3 жыл бұрын

"David is an experienced racecar builder and fabricator, if you'd put the surge tank somewhere different, he doesn't care" Golden middle finger to the armchair fabricators

@ThunderAppeal 3 жыл бұрын

He sent out the exhaust manifold to have it made by someone else. He's *not* a 'fabricator', he's someone who has experience slapping parts together.

@ImBarryScottCSS 3 жыл бұрын

@@ThunderAppeal He was talking about the fabricator, not himself.

@Tyler-ts2ld 3 жыл бұрын

@@ImBarryScottCSS he was referring to people who will comment on the video saying they’d have put it somewhere else.

@Tyler-ts2ld 3 жыл бұрын

@@ThunderAppeal Al didn’t have the manifold made, Millsi did.

@nielsdebakker3283 3 жыл бұрын

@@Tyler-ts2ld Actually, Millsy's brother did.

@Averna222 3 жыл бұрын

I never get tired of the "plumbed back to atmosphere" lol

@Rollin8.0 3 жыл бұрын

I came here to say this exact comment. Still chuckle every time.

@shaunc4602 3 жыл бұрын

Lol science

@LongPeter 3 жыл бұрын

The turbo forklift continues to please me immensely.

@SoulTouchMusic93 3 жыл бұрын

i was hearing that and i was thinking it was a turbo forklift. why tho?

@LongPeter 3 жыл бұрын

@@SoulTouchMusic93 it's just an old turbo loosely welded to the end of the exhaust pipe and not plumbed into the intake or anything. Just because it's funny :)

@walker27productions 3 жыл бұрын

Hey Woody ! Your aunty came into my work the other week and saw the skid factory sticker on my hzj80 Landcruiser. It was quite funny her telling me about you and seeing how proud she was of you. keep up the good work mate.

@Phil_Bennett 3 жыл бұрын

Al's mouth : Coriolis Effect Radial Flow Turbo Manifold. Al's brain: Log manifold go Brrrrrr

@ryan_etzel 3 жыл бұрын

I have to say fellas. You've come a long way since Marty and Moog let you run MCMTV2 for a while. Every episode is better than the last. Keep it up!

@primycha 3 жыл бұрын

Next up on The Skid Factory: Al tests all brands of "loctite" and rates their flavours!

@archygrey9093 3 жыл бұрын

I like the blue one, the red one makes my tounge feel fuzzy.

@JohnRolyAU 3 жыл бұрын

You'll need 1500HP to pull that manifold along the road.

@bryanrussell6679 3 жыл бұрын

For a turbo manifold, you'll benefit greatly from the strength that the heavier guage steel provides. But yeah, it might take 1500 hp. Lol

@joshkamp7499 3 жыл бұрын

Love the "aw shucks" low key attitude when in actuality it's a team of professionals coming together to build an absolutely mental machine.

@benpaganoni8444 3 жыл бұрын

total under statement ..Legends

@benjaminhess4820 3 жыл бұрын

MCM and SkidFactory videos withing 10 seconds of each other! Amazing!

@victorbitter583 3 жыл бұрын

MCM can wait.

@FMuscleZ28 3 жыл бұрын

MCM still does videos? I don't think I've seen one come out this year yet...

@Simon.the.Likeable 3 жыл бұрын

Sorry, I watch MCM first due to my KZfaq seniority rule, oldest channel first. It works for me.

@brendo7363 3 жыл бұрын

Full boost dropped at 6am

@mikelaradesigns 3 жыл бұрын

Loctite tastes like lollies, I'm sure that's not legal. Brilliant!

@billreid11 3 жыл бұрын

Awesome content! Make the Gerfinger Poken sticker into a t-shirt please. Cheers from Arizona!

@wraithcadmus 3 жыл бұрын

I'm glad to see the tradition keeps on, I know it in IT as 'Blinkenlichten', but it apparently has roots in WWII.

@joealex65 3 жыл бұрын

7:18 **"Ying Yang Spinny Thang"** You love to see it 😂😂

@Matty.Hill_87 3 жыл бұрын

Otherwise known as the wutang war whistle or the wuhan wheezy boy

@bryanrussell6679 3 жыл бұрын

I can certainly appreciate the meticulous nature that Millsi put into building that perfect manifold, lol. Perfection to detail is one of my hang ups too. Beautiful piece of craftsmanship!

@scottinWV 3 жыл бұрын

"Coriolis correct for the southern hemisphere! " Hahhah

@bawwsbearrd 3 жыл бұрын

Yeah it's cause of how "flat" the northern hemisphere is.....🧐

@ryubiggie 3 жыл бұрын

The look on Al's face when he said that 🤣🤣 freaking gold.

@watsisbuttndo829 3 жыл бұрын

Turbo was prolly made in the northern hemisphere so i hope they got the maths right.

@OG-nl8so 3 жыл бұрын

Greetings from Southwest Texas. You guys keep up the great work that is put into these vlogs the content is next level and now that Al's son is dropping his sound it to fill in the gaps has put this channel to the very top that is car culture . Woody your skills are getting razor sharp and looking forward to a road trip soon. 🇺🇸

@themaconeau 3 жыл бұрын

Every time Millsi is on, you should say something like, " Welcome to The Skid Factory. Today, FknMillsi is here and wants me to fix my mower he borrowed .. FknMillsi" 😂

@feenyx6394 3 жыл бұрын

That is a very, very slick manifold indeed! Very excited to hear this thing rev when it's all done :D

@davidmaye3580 3 жыл бұрын

Being able to see exhaust manifold pressure helps to make adjustments/corrections on the thermocouples as well.

@ThePentosin 3 жыл бұрын

Ah, man, love it when you do stuff like line up the music with the ratchet.

@idoskidsattheawesomeauzzie9255 3 жыл бұрын

Thanks Al,... always good to see how you roll WOW MAN.... this Bedford Barra is a Monster 👹

@fachu2 3 жыл бұрын

I've only just stumbled on to this build. Can't wait to see this thing running. Its a far cry from the Holden Red Motor.

@adamloader9534 3 жыл бұрын

The Bedford is going to be epic. I saw the Drag video and that thing went straight as an arrow down the strip. I can’t wait to see what it runs once it’s sorted out with all the new driveline improvements 😎👍

@grizoh 3 жыл бұрын

Does the manifold flow in the same direction as the turbine wheel spins? Also your videos have become probably the best auto channel on KZfaq 👍you guys are killing it.

@tannermoroz9732 3 жыл бұрын

MCM AND Skid Factory in one night? What a treat!

@illfixit2737 3 жыл бұрын

Best series yet . Loving the Bedford 👍🏽👍🏽

@Tilpants 3 жыл бұрын

Unpacking car parts and looking at your mates through the holes looks like fun, I can't wait until I can do it too!

@NeatSix 3 жыл бұрын

I'll give whoever was editing big props and credit for that very very satisfying sync of music to Al ratcheting @ 6:07

@tylervanorman492 2 жыл бұрын

Drive pressures is a great data point for diesels. Should be here too. Data is KING

@williamyarwood 3 жыл бұрын

Man thats a sexy turbo housing... nearly as cool as the supra that it came of

@millsi1978 3 жыл бұрын

😘

@aSinisterKiid 3 жыл бұрын

Wow. That manifold is a piece of art. Incredible craftsmanship and perfectly thought out. Nice to see a perfectionist given the opportunity to do things to the best of their ability. edit: Wait, you said Drag Week.......Do you mean Millsi is bringing it over here to the US for Hotrod Dragweek in september ?

@millsi1978 3 жыл бұрын

That's the plan once China flu fucks off!

@krissteel4074 3 жыл бұрын

It was a beauty of a manifold, everyone- ooooh! Next scene Al- drill goes brrrrrrr!

@bvward 3 жыл бұрын

@@millsi1978 Any idea who else from your "friends" group are coming? I'll alert Border Patrol. Does Skippy need a visa?

@millsi1978 3 жыл бұрын

@@bvward lol, I thought we might enter from Cuba in a boat smuggling barra parts.

@willd2156 3 жыл бұрын

Thank you boys. Been watching every episode since the mcmtv2 days. I get so excited for Wednesday arvo. The content gets better and better all the time. Big thank you ✊

@Paulman50 3 жыл бұрын

I used to make those swirl extractors back in the 80s. The principle is like the water swerling down a drain, it's fast. But the water not swerling emtys the container a lot slower, seems quieter as well. The last swerler I made was about 3 weeks ago inside a full flow muffler, still full flow but a lot quieter.

@MrMov41t 3 жыл бұрын

David is the best ..He builds everything above and beyond especially my Rx3 ... Miller Chassis’s

@millsi1978 3 жыл бұрын

Absolutely!

@skinfull 3 жыл бұрын

Loving Barra Bedford round two! Great work fellas.

@michaelb5330 3 жыл бұрын

Bedford naming competition??? Great content and loads of fun 🤩

@iankstanley 3 жыл бұрын

Awesome tunes from your son to go with the great content.

@anthonystevens403 3 жыл бұрын

LOVE YOUR WORK GUYS, from Melbourne.

@danielflood454 3 жыл бұрын

Love the sound of a plumbed back to atmosphere gate

@mitch2839 3 жыл бұрын

Cracked up when you got the hammer hits and the ratchet in time with the music 🤣. Good stuff Woods

@shaundevine007 3 жыл бұрын

Niiiiice! The van is coming along very well👌🏻

@ozbusa 3 жыл бұрын

Awesome. Just gets better and better content. And I am hooked on the intro music..

@JDMmick 3 жыл бұрын

im loving that van more and more

@Jimmyk63 3 жыл бұрын

Thank you for your insitght and video on this wild van build🙂❤👍

@alexhatcher5688 3 жыл бұрын

The editing is bang on 👌

@metric4710 3 жыл бұрын

Next gen is obvious. Old engine powering front wheels and the new one shifted backwards driving rear wheels. Rear axle turned backwards and some 4row industrial chain from tranny to the diff. Skid factory guys will love the idea 😀

@battleaxe1985 3 жыл бұрын

Looks like the editing is taking a turn for skate videos and editing on sound clips...which is a sacred and tricky art. I think you're doing an excellent job with the learning of video. Great job guys, always love the videos!

@kareareawbg 3 жыл бұрын

You'll be able to work out turbo efficiency Banks Data Monster style with that setup. Freaking awesome watching you guys.

@lory2622 3 жыл бұрын

6:23 absolutely WINS the internet!

@whistlebirdproductions6249 3 жыл бұрын

I had no idea turbo yota had his own channel!!!! This is awesome! Made my year!

@diytutorialsandmore9804 3 жыл бұрын

:) the coating garage does a king job love em

@Trotaaa 3 жыл бұрын

Loving the music! Impressive stuff! Moog has some stiff competition now!

@ghomerhust 3 жыл бұрын

"nicht gafinger poken" has to be the best sticker ive seen in a while "calibrated gapping bench." merch store item?

@johnsmith-qz4bv 3 жыл бұрын

great work guys

@lachlan5976 3 жыл бұрын

Blue loctite tastes amazing. Very much not good for you but I've never tasted something so sweet. There are even forum threads comparing the tastes of various colours of loctite.

@hugovandyk3845 3 жыл бұрын

Loved the intro bit, honestly

@MrDannyd9 3 жыл бұрын

14:30 Bosch anything works on everything, always. I love Bosch products.

@paulwiggans3692 3 жыл бұрын

Different manifold for the northern hemisphere. Priceless.

@keiran_wilkinson 3 жыл бұрын

this Bedford us going to be insane

@fendel_ 3 жыл бұрын

Love this epic project! The shot of Al explaining things with the turbo over his head was brilliant! And those headers were legendary, the craftmanship was so amazing!! Love it!

@star1098sr 3 жыл бұрын

Love your work boys👍

@murdurer333 3 жыл бұрын

Dammit I can never click on the thing in the corner because I'm watching on a TV 😢 (Chromecast)

@tomanycooks 3 жыл бұрын

loving the music hey 👌 this thing is going to be insane

@SHOCKcustoms 3 жыл бұрын

Love the content gents. Tremendous vids

@lamboferruccio 3 жыл бұрын

Loving the Bedford rebuild absolutely but man I’m excited about that H250 project, just watched the intro vid on the other channel I love those things

@Nickcase1981 3 жыл бұрын

Editing is spot on with tool sounds and music 👍👍👍 Noice Juan Woody 🤘🤘🤘

@mickmccluand4677 3 жыл бұрын

These little moments is what I enjoy.

@shallowabyss515 3 жыл бұрын

"Its like a loli - surely that's not legal" Had me ROLLING

@MangoVisionn 3 жыл бұрын

Not loli wtf! Lolly!

@shallowabyss515 3 жыл бұрын

@@MangoVisionn Damn shit the comedy police after me for making a joke.

@roost.com. 3 жыл бұрын

It was neither of them 😂

@falksyberg5624 3 жыл бұрын

For years now I suspect that this is a "Berlin Bear" tattoo on Al`s arm. The perfect pronunciation of "Schnitzel" @8:23 only strengthen my believe that there is some sort of connection to germany or there was a germanophile phase in his life.

@TheRealMrCods 3 жыл бұрын

Awesome Lads 👌

@NeverLetOff 3 жыл бұрын

So excited

@c.spencer2338 3 жыл бұрын

great stuff guys!

@ToxicMrSmith 3 жыл бұрын

Was patiently waiting for the "plumbed back to atmosphere" when talking about the wastegate.

@Matty.Hill_87 3 жыл бұрын

I just watched the project binky episode with the turbo yoda cameo, honestly haven't laughed like that in ages 🤣🤣

@Adrianzx 3 жыл бұрын

Great intro

@levikleyn361 3 жыл бұрын

Am i the only one who noticed the socket ratchet in time with the music at 6:12? Bitta mint editing from woody I reckon

@AndrewSnyder-Urech 3 жыл бұрын

'calibrated plug gapping bench' gotta get me one of these

@trexfishtec7375 3 жыл бұрын

If he's going to know if he has "danger to manifold" you had better rig it up to have fall away chequered floor plates and convert to a 12 speed manual 😉

@millsi1978 3 жыл бұрын

Plenty of room for 2 of the big ones in the back!

@timearll266 3 жыл бұрын

God bless ya, Millsi!

@MafiaboysWorld 3 жыл бұрын

Hey Woody, remember how I said last week "oooh, shots fired on turbo taxi", well I wasn't the only one who thought it, the owner did too. 😂 I explained in DMs that it wasn't directed his way, so all good. 😉👍

@brianrichards782 3 жыл бұрын

New music is refreshing g

@markbithrey3635 3 жыл бұрын

Can’t wait for next week now seeing that old crown in the back ground got me excited looks a bit cleaner then my old ms55

@theskidfactory 3 жыл бұрын

It's not a crown.

@andyjames2082 3 жыл бұрын

Same 6 pack as mine Al, winning

@Christmoore155655 3 жыл бұрын

that hoist goes up mighty fast

@andyplage6590 3 жыл бұрын

Have say its the First time I've Ever heard a Bedford Cf Van called a Car !!!

@jasonbirch1182 3 жыл бұрын

I wish the Bedford came to the US. It looks like a Pontiac version of our gm vans from the 70/80's.

@millsi1978 3 жыл бұрын

I believe they did in very limited numbers and also has a rear seat option from factory

@DOCTRJ 3 жыл бұрын

Beast at work

@lanehittle7359 3 жыл бұрын

Should do a millsi's box merch pack !

@aweakling 3 жыл бұрын

Al could you please teach us about log manifolds? For example to they spool faster but have less peak power? Are they better at transferring heat to the turbo, and if so is that a good thing? Thank you!

@phillipcave1197 3 жыл бұрын

Cable driven fuel pumps are used in the states, Cleetus uses them in his cars.

@HereIsMyOffer 3 жыл бұрын

The old ''Gasket goo'' in the little bottle with a brush, used to smell really sweet also! Not sure how it tasted lol

@crouchingwombathiddenquoll5641 3 жыл бұрын

Now would be the perfect time to install an extra steering column for the northern hemisphere. Twin steering wheels would be comedy gold.

@daviddwight5745 3 жыл бұрын

millsy must be a successful gold miner!

@MrFathead 3 жыл бұрын

The turbo on that forklift makes me laugh, its so good haha.

@Hungry_Hunter 3 жыл бұрын

I think a new merch opportunity is begging called ""Coriolanus Correct "" for all the clever kids taking their cars over the equator. Maybe a do it your self firing order reverse kit would be popular too.

@bgdwiepp 3 жыл бұрын

Just need a shirt with coriolis correct turbos to match (reverse rotation vs standard)!

@richardallen1629 3 жыл бұрын

Reminds me of the old Peter Brock Energy Polariser ... 👍

@masonryan5139 3 жыл бұрын

what a beast

@rompdude 3 жыл бұрын

Woodriguez.. You forgot the link in the top right! (at least it didn't show up for me)

@_____7704 3 жыл бұрын

Ahhhhhh yes, the Skid Factory Villian FknMillsi

@ArthurTaylorW 3 жыл бұрын

Locktite tastes like lollies because it has saccharin, the artificial sweetener, in it. Makes you wonder about what we put in food...

@bvward 3 жыл бұрын

Too much locktite=lockjaw?

@cars4477 3 жыл бұрын

Question about aussies and their intercooler piping: what’s the need to run a weld down the outside of a bend? I see this a lot on turbo inlet piping as well. Is it for looks, transitions, strengthening up the outside thin wall?