No video
Corvette C6 LS3 High RPM Upgrades, Johnson Lifters, Harland Sharp Rockers, Earl's Steam Port install
Рет қаралды 6,036
Жыл бұрынthe LS3 C6 Corvette gets racing lifters, adjustable roller Harland Sharp rockers and a steam port kit added. Just Racing in Las Vegas (www.justracing.com) rebuild the heads and we put it all back together with Chevrolet Performance parts.
We supply Wisefab , Feal and many other brands worldwide , don’t hesitate to contact us on info@einzel.nl
Shop Styling Parts for Audi,BMW, Ford, Honda, Mazda, Mercedes, Subaru, Porsche & VW?
www.k2-industries.com?sca_ref=3202641.z1LBYSR9KJ
Use Discount Code : DRIFTJESUS
Other Videos you don’t wanna miss :
E46 V8 Pro Drift Car
• E46 Drift Build Video ...
Odi Bakchis Formula Drift Nissan S15
• Odi Bakchis explains h...
NASCAR gearbox explained / installed
• NASCAR Drift / Drag Do...
Mythbusting Quick Change Diffs
• Mythbusting Quick Chan...
7.25” Tilton Clutch / throw out bearing gap install
• 7.25" Triple Ceramic R...
E46 M62 Vortech Rear Mount Radiator
• Build Video : E46 V8 D...
Nissan S14 Pro Drift Car Build
• Drift S14 with NASCAR ...
Quick Change Diff Install Nissan S14
• Quick Change Different...
Formula Drift Corvette Setup At St Louis
• Behind the Scenes of F...
Worldwide parts :
www.einzel.nl
info@einzel.nl
Dealer for
Wisefab
Feal Suspension
NASCAR gearboxes
Quick Change Custom Differentials
Seems Legit Garage
Fuelab Fuel Systems
@Airman.. Жыл бұрын
Nicely done
@TheSkattin Жыл бұрын
Awesome video. How high does this let you rev the motor to safely?
@DriftJesus Жыл бұрын
I'm always conservative so I'd say you can do 7200 on this if you upgrade the oil pump aswell. I know people will turn 7200 on stock motors but that's not long term safe
@Funkyflykiwi Жыл бұрын
maximum “safe” rpm advice is all over the show for LS engines, ive spent a lot of time reading experiences and advice. Consensus seems to be 7000rpm is safe if you do valve springs, pushrods, lifters and oil pump (all uprated over factory) and do the trunnion upgrade.
@DannyR2681 11 ай бұрын
@@DriftJesuswhat part number Johnson lifters do you recommend for a 6.0 with btr stage 4 cam and fast lsxr intake? It’s a dedicated drift car
@TheDevin918 Жыл бұрын
Did the Harland sharps clear the valve cover baffles?
@DriftJesus Жыл бұрын
On these covers yes, the stock ones don't fit
@TheDevin918 Жыл бұрын
@@DriftJesus thanks for the reply. Did they hit the baffles on the stock ones?
@DriftJesus Жыл бұрын
@@TheDevin918 I didn't try, we knew it wouldn't work. We have these covers on a few cars back home too. FD car has billet Mantons.
@ThatGuy-xd5fs 8 ай бұрын
Where is this machine shop located ❤❤
@DriftJesus 8 ай бұрын
Vegas
@carter4627 8 ай бұрын
All kitted out but you still put stock tty head bolts😂
@DriftJesus 8 ай бұрын
On purpose yes.
@jimmydanc 2 ай бұрын
It doesn’t matter, that’s been disproven plenty of times
@barniechong1183 2 ай бұрын
What do you mean?
AnythingAlexia
Рет қаралды 27 МЛН
John Franco
Рет қаралды 15 М.
Garage 54
Рет қаралды 4,1 МЛН
Richard Holdener
Рет қаралды 325 М.