No video
Could this be the best MTS welder yet?
Рет қаралды 267,014
Күн бұрын#welddotcom
Could this be the best MTS welder yet? We intend to find out! Today we are unboxing and testing out the Everlast PowerMTS Lightning 275. This welder is an ACDC power source that man TIG, MIG, and Stick weld 7018 AND 6010. The digital layout makes finding everything easy and lots of memory settings make switching to commonly used programs easy.
Head over to our Website and become a free member: www.weld.com
You can join our groups and forums, ask technical questions, answer questions in the community, look for jobs and more!
Follow up on Instagram: / welddotcom
Visit our www.Weld.com/shop
Don't miss new episodes of our podcast, please subscribe and leave us a review!
Now available on these platforms:
Anchor: anchor.fm/weld...
Google Podcasts: www.google.com...
Spotify: open.spotify.c...
RadioPublic: radiopublic.co...
Breaker: www.breaker.au...
Brands that Support the Channel:
BOHLER WELDING: www.voestalpin...
ABICOR BINZEL: www.binzel-abi...
ESAB POWER SOURCES: www.ESAB.com
EVERLAST POWER SOURCES: www.everlastge... AHP POWER SOURCES: www.ahp.com
COMEAUX CAPS: comeauxcaps.com/
Get your ISOtunes (OSHA / NIOSH Compliant) Headphones HERE: And Use our code WELD10 for 10% off isotunes.com/?...
TubeBuddy: www.tubebuddy....
Disclaimer: As an Amazon Affiliate and influencer, Weld.com earns from qualifying purchases via our posted links and affiliate links.
Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK. EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.
@Welddotcom 4 жыл бұрын
For those asking, you can get more information on the Lightning 225 here: www.everlastgenerators.com/product/mig/lightningmts-225-tig-package
@silasmorand8173 4 жыл бұрын
Hello. My name is Silas Morand and I'm wanting to purchase my first MTS welder. Is the Everlast lightning mts 275 just like this machine, but stronger? Ive been looking at the Everlast lightning mts 275 for quite some time now and I'm highly considering it. Does it have the same consumables as this machine like the nova foot pedal? Thanks..
@jonathangarzon2798 Жыл бұрын
Is the power cord removable or permanent mount?
@super_slo 4 жыл бұрын
Just want to say thanks for continuing to produce valuable content that helps inform and make purchasing decisions right now. Really appreciate it. I feel like you've been getting better at being the primary presenter each episode. Don't worry about the trolls and negative Nancy's - you are doing just fine! 🤚🏼 High five and keep up the good work!
@Welddotcom 4 жыл бұрын
Thanks for the support 🙏
@mancubwelder1312 4 жыл бұрын
Thanks Super Slo
@andreuyeskof4160 4 жыл бұрын
The best welding channel where they show the welding process in amazing quality! Respect
@SL-ix4yk 4 жыл бұрын
I just bought this exact same machine 3 weeks ago, absolutely love it, I haven't got the tig set up but Mig and stick run great. Well done review !
@philipershler420 4 жыл бұрын
Hey dude, you are doing a great job “in relief” for the other guys. Good on ya!
@johnhayes9437 4 жыл бұрын
bought their 520 three in one... wanted the plasma mostly and the stick... The tig was a bonus and I had never tried it before . Thought I had died and gone to heaven... a non violent process was just another world after decades of mig and stick… just a hobby welder now. The stick was what sold me... nice welds. The plasma is impressive and cuts thick 1/2" no problem and will hack it's way through 3/4". I'm still learning the tig process.
@steveneldridge6787 4 жыл бұрын
I bought an Everlast 251si about 2 years ago and absolutely love it. It's a little over 100 lbs with a 33lb spool and will run some thick material on 110v even thicker on 220v. I'd compare the power and quality to the Lincoln powermig256 except it does stick and Tig and is about $1000 cheaper plus 150lbs lighter. Go Everlast
@claudemaggard7162 2 жыл бұрын
I been thinking about getting this machine. Is it worth the money.
@steveneldridge6787 2 жыл бұрын
@@claudemaggard7162 Hey Claude. I'm still rocking my 251si and it's still working exceptionally. I am doing mild steel shielded mig work 95% of the time and the machine is great. I like being able to adjust pre and post flow for shielding gas which helps when working outside in the wind. I didn't have that option on the Lincoln powermig.
@claudemaggard7162 2 жыл бұрын
@@steveneldridge6787 thanks for the info. Much appreciated. I'm definitely gonna buy that machine. Is it a heavy machine.
@steveneldridge6787 2 жыл бұрын
@@claudemaggard7162 it's a little over 100lbs with a 33lb spool. Much lighter than a comparable 250amp machine. I can load and move it myself which is nice.
@jakelacey678 4 жыл бұрын
Take a deep breath and relax more often. Your doing an excellent job!
@slakjawnotsayin5451 2 жыл бұрын
I bought one after watching this vid! I didn't think a machine existed that was multi and had AC tig, and 2 gas ports!!! It even comes with the pedal, and the touch switch that I haven't seen on others I looked at. I found it weird that there's no tungsten supplied with it but there's everything else for the torch. Can't wait to try it out.
@armurano5093 2 жыл бұрын
Please tell us how it's going? Inquiring minds want to know!!!
@slakjawnotsayin5451 2 жыл бұрын
@@armurano5093 sorry to leave you hangin. I didn't try it out yet, but I lent it to a buddy to do some MIG hole filling he is doing on his project car and he LOVES it!!! With spring coming, I'll probably be using it a fair bit in a coupe months, and should be able to give some better feedback.
@BlindBatG34 4 жыл бұрын
That machine looks perfect for the welding bench I just put together. The dual gas feature is awesome. Now, I gotta save some pennies.
@bearsrodshop7067 4 жыл бұрын
My EverLast 256s has been one of the best investments and additions to our shop. Wow this new Lighting is is awesome!! Since I am nearing 70, thinking the wive would kill me if a new Lighting was to arrive,,,hehe!!
@arnoldkokonya 4 жыл бұрын
I started welding two months ago and this pandemic has made me stay home and I am not able to weld. I just watch as much as I can so that when I resume, I am doing well.
@PacificArcTigWelding 4 жыл бұрын
Tough times for sure.. hang in there. Watch as many videos as you can, it'll be over and we'll all be back ripping soon!
@arnoldkokonya 4 жыл бұрын
@@PacificArcTigWelding Does watching still help? I watch so much in a single day so that I don't forget about it.
@yesshewelds2425 4 жыл бұрын
And I'm in school for welding. They've cancelled summer school so I won't be able to take stick until the fall. 😑 I really need to get my own welder...
@arnoldkokonya 4 жыл бұрын
@@yesshewelds2425 I also thought the same until I saw the prices of these welders. They are hella expensive. Like my folks spend all their savings on my course and I am not ready to ask them for a welder. I hope to get some money as I save for one coz these things don't come in cheap.
@yesshewelds2425 4 жыл бұрын
@@arnoldkokonya you're absolutely right. I was looking at a few multi-use welders and oh my glob...the prices were astronomical. I want to start off small now so I'm probably gonna grab a MIG. Just to stay on my toes. I'm in the degree program and the discounts for students is great. One of our teachers has a friend at AirGas and he gets us excellent deals. If not for that, 👎
@PacificArcTigWelding 4 жыл бұрын
GREAT review! Good quality video too! I bought the 210 EXT for my shop here at home for my channel as well, I love it! Everlast for the win!
@iannlb 4 жыл бұрын
Absolute awesome job on the review man. Fast paced, great shots and I could here you pretty clear under the hood impressions.
@mancubwelder1312 4 жыл бұрын
Ian thanks man. Thanks for watching weld.com. Stay healthy
@iannlb 4 жыл бұрын
ManCub Welder Oh wow! Thank you too ManCub!
@tommyt2854 4 жыл бұрын
Good review. Your presentation is getting much better.
@mancubwelder1312 4 жыл бұрын
Thanks Tommy T
@keithlucas6260 3 жыл бұрын
Remember, if it sounds like your "cooking bacon" your doing good. My first welder, bought back in 1974 when I was 18 for $49.99 and was a Lincoln 220 "buzz box." Later on I picked up a used Miller 250 AC/DC-HF Tig metallic syncrowave that came with the four roller industrial mig unit and stick leads....it welds great, but is heavy to move around and it's hard to find parts for as it was made around 1966...plus the cable to amp indicator is broken and I just "crank by feel," then look at the weld & adjust. My next welder is a Hobart 160 AC/DC stick which I recently hooked up my Tig to....works ok, but not like the Miller. Since Harbor Freight came in five years ago I've been looking at other options than the high dollar machines. This machine looks awesome.
@ole496 4 жыл бұрын
Great review! I do miss Bob’s sarcasm though...
@darkforcex7362 4 жыл бұрын
Bob is still the King
@DCweldingAndArt 4 жыл бұрын
@@darkforcex7362 bob will remain the King, and Jody the Godfather. But Mancub has really stepped up here lately, hes paving a bright road ahead of him
@joelricheme 4 жыл бұрын
i do miss bob too. he is funny as hell, he must have many good stories to tell.
@NPC-ro5io 4 жыл бұрын
Bob seems to have ventured over to ESAB kzfaq.info/get/bejne/as6IgrKCnbLGink.html Has a few recent vids on their channel
@mrmidnight32 3 жыл бұрын
The crew they have might be the best they’ve ever had. But Bob is the legend.
@markstevansen542 4 жыл бұрын
I've got one the Everlast first gen MTS welders and thought they couldn't get any better. I really want to get one these new ones.
@doughboy5840 4 жыл бұрын
Great review and test. I like seeing more mancub always entertaining when I'm bored in quarantine
@Welddotcom 4 жыл бұрын
Thanks for watching
@mancubwelder1312 4 жыл бұрын
Thanks.. lol
@ChingoMandinguez 4 жыл бұрын
I like this guy, he hauled ass through the review, and gave all the info you need! edit: just saw below this dude's nickname is ManCub... I like him even more now, lol
@michaelmobilautodiagnostic6705 4 жыл бұрын
I got mine last week by accident I actually ordered the everlast 221 sti but recieved the mts 225 for some odd reason. I also notice the price change on the one I actually wanted it dropped to 1,800 when it originally cost 2000 I'm thinking that's probably why I got the mts225 because it now cost 2000. it's a good welder and I'm looking forward to learning more with all the extra functions .
@onepieceofbread 4 жыл бұрын
Great presentation, good product. Thank you for helping all the welders in their choices.
@amberzhang3170 4 жыл бұрын
Wow, this kind of review about welding machine is really helpful! Could you do more reviews?
@RoyMeraki 2 жыл бұрын
is it just me that I find just the sound of mig welds are so satisfying..
@darkforcex7362 4 жыл бұрын
This has to be the best Review of any machine I've have ever seen. Great production guys. You got my sub.
@Welddotcom 4 жыл бұрын
Thanks for the support
@whatsstefon 4 жыл бұрын
That’s one the tidiest stick welds I’ve ever seen.
@orbitalair2103 4 жыл бұрын
Yeah, as someone trying to learn this stuff, thats amazing. Mine still looks like poo....
@hvymax 2 жыл бұрын
Dual gas is an awesome option. Truly an amazing machine. I have a 185 DV for AC/DC Tig and the separate mig. While that's an amazing shop machine having more compact DV machines are my preference.
@waitemc 4 жыл бұрын
Put my everlast tig and cooler on a power chair base. Best cart ever rolls over everything . Airlines no problem cords no problem . Wicked smooth the foot rest even acts as tank holder base. Whats even more sweet charge up the batteries and use the chair joystick and drive it around . Still not impressed , well installed 2x60 controle board and r.c receiver and remote drive that Bit%$.
@Chad_N_Stacey_Hopson 4 жыл бұрын
IT'S MY FIRST WELDER AND AS A BEGINNER I DON'T SEE MYSELF EVER NEEDING TO BUY ANOTHER ONE .... PERIOD.... IT HAS IT ALL!!!! I ALSO GOT THE POWERCOOL 400, CART, AND THE PARKER 360 SPOOL GUN.... ALL SET.... EXCEPT OUT OF THE 17 MILLION DOLLARS THAT WAS SPENT ON ME GOING THRU SPECIAL FORCES Q COURSE AND TRAINING.... THEY NEVER SHOWED ME HOW TO WELD.... HMMMM .... THANK GOD FOR WELD.COM, WELDING TIPS & TRICKS (JODY), THE FABRICATION SERIES, THE FAB FORUMS, ETC. HOPEFULLY ILL FIGURE IT OUT!!!! LOL
@DCweldingAndArt 4 жыл бұрын
Cub, u have been steppin it up here lately, I TOLD U that u would! Gettin better everytime, less nerves in your voice, nice beads, and hey, nice shave! Hahaha lookin professionally Mancubby! Keep it up brother!
@KD0CAC 2 жыл бұрын
I bought one of these , 1st job repair a aluminum pontoon worked good .
@UTLakelizard 4 жыл бұрын
You do a good job explaining the menu items on the digital displays. There are very few shots of the electrodes hook ups from below. Can you share the hook ups for AC stick welding, DC stick welding, etc?
@TheAefril 4 жыл бұрын
Awesome thorough review there! I wish this beast would be sold and serviced in Australia? One box that can do it all! Thank you for showing this.
@philipzerna9654 4 жыл бұрын
It is for sale in Australia everlast out of Melbourne
@johnheiss9954 3 жыл бұрын
This guy can weld, and knows what he's talking about!
@fosterbrown2610 4 жыл бұрын
Went and purchased it right after watching this vid, not gonna miss the chance while its on sale!
@darkforcex7362 4 жыл бұрын
I did the same
@jvmiller1995 4 жыл бұрын
Where? Its is not even for sale on Everlast sight yet. They get them early to review
@fosterbrown2610 4 жыл бұрын
@@jvmiller1995 its definitely for sale on their website lol. Listed for $2,000 original price was $2,689. Just look under products- and then multiprocess welders
@jvmiller1995 4 жыл бұрын
@@fosterbrown2610 I see it now I looked it up a hour or so before I made my comment and it wasn't on there or I over looked it. either way I man enough to admit when I am wrong.
@tunintunin3417 3 жыл бұрын
Awesome review, my next welding machine. Sick and tired of proprietary consumables with the “branded” welding machines. Soon, they are going to do what the tractor companies are doing, you’ll need to ask them when you can weld.
@replyhere590 Жыл бұрын
Tunin: Completely with you--support "right to repair"! And generic consumables.
@FishFind3000 4 жыл бұрын
I have there stick welder and it’s great.
@Kevin.L_ 4 жыл бұрын
I'm impressed with my 210STL.
@toolbox-gua 4 жыл бұрын
Great video. Whatever the machine presented, although you like this one, your content is up to the other guys, friend of yours and all. Second to none. Miss the rest of the team anyways. Stay safe, behind doors.
@joebob7344 3 жыл бұрын
One of the best demo videos I’ve seen on KZfaq. Keep up the goodwork. I hit like and subscribe.
@everlastgenerator 4 жыл бұрын
Excellent review Mancub. Looking forward to getting your thoughts on the advanced pulse features. 💚
@rodgerlogan 4 жыл бұрын
Love my MTS221Sti that I bought last May. BUT. Should have waited a year for the 225 Lightning. Oh, well!😎
@Moparmaga-1 4 жыл бұрын
Awesome, I just picked up the everlast powerpro256 si multi process machine. I burnt a few sticks, I have alot to learn. It has arcforce, I don't know what that is. I had 3/32 6011 & 6013 & ran it at 130 amps on 1/2 inch. Funny watch a long rod disappear in 7 seconds
@supersquirrel379 4 жыл бұрын
as someone looking to purchase one of these welders I appreciate the video I would really like to see a side beside comparison of this and the 221 sti what you get with one that you dont with the other and why I should consider this over that and so on again thanks for the videos
@MikeP350 4 жыл бұрын
I sat there for a minute and waited for the thumbnail to finish loading...
@Welddotcom 4 жыл бұрын
😂😂😂
@Kevin.L_ 4 жыл бұрын
Nice quick run down. Thanks. Good job.
@franklandgraff1190 4 жыл бұрын
Thanks for the presentation!
@Welddotcom 4 жыл бұрын
You're very welcome
@joenesiadicola3006 Жыл бұрын
For stock mode can you when jumping from 6010 to 7018 can you just crank amps up and down instead of navigation menus and rod time selection. Basically in the field for pipe welding you want a simple adjustment. For example telling an apprentice to turn up the welder is fairly simple but having them navigate menus well they could asily mess it up or "need help" which would be annoying. Thanks
@romannabong6804 Жыл бұрын
Im impressed with how its a complete package multiprocess welder for the price. The only thing i dont like is the presets. Miller has these I hate them. I turn em off. But it looks like with this you have no choice. The last time i ever dabbled with hot start and arc force was testing in school. After that never used em again.
@WildGooseProductions 4 жыл бұрын
That spray arc shot was basically weld porn
@growlith6969 4 жыл бұрын
Im a hobby welder at best, I only understood half of the settings. Do you have a video explaining them and when/why to use them?
@joeyrice3903 Жыл бұрын
Mike, I used to work with you. I just ordered this machine
@Johan_Pentrose 4 жыл бұрын
Nice. video. You used angle iron on the weld cart. Machines simply slide in.. they never fall through or go anywhere but within the angle iron..
@fasteddys906 4 жыл бұрын
Dude that welder is so perfect it does everything! How much is it?
@Welddotcom 4 жыл бұрын
It's $600 off through Everlasts website right now ($2000)
@paulmcdonald3570 4 жыл бұрын
FAST EDDYS 906 2k on everlastsite
@fasteddys906 4 жыл бұрын
Paul McDonald thank you!!
@fasteddys906 4 жыл бұрын
Weld.com thank you I gotta save for one of these it’s the perfect machine of my dreams!
@paulmcdonald3570 4 жыл бұрын
FAST EDDYS 906 I bought the mts 221sti a few years back.the only issue I had was damage from shipping. Took awhile to get sorted out. Other than that happy with the unit.
@fastylep.3240 4 жыл бұрын
I'm guessing you liked the machine but/because(😳) you didn't make any comments about it at the end of your demo. I do like the dual gas setup, going to have to make a few setups for my 210EXT and 253DPI! 😎👍
@shahbazkh2885 4 жыл бұрын
The best channel for welding ... up to 1milion subscribe...thank you for information 🖒☺+like
@PacificArcTigWelding 4 жыл бұрын
One of the best channels agreed!
@shahbazkh2885 4 жыл бұрын
@@PacificArcTigWelding Yes, that's right, one of my favorites
@markbreidenbaugh6033 4 жыл бұрын
I would love to see you guys test the esab rogue es 180
@darkforcex7362 4 жыл бұрын
I love my ESAB. I do all my structural stuff with it.
@markbreidenbaugh6033 4 жыл бұрын
@@darkforcex7362 I have the 161 and the only thing I dont like is the dial is way off and have been thinking about upgrading to the 180. I use the 161 for all of my in field stick welding.
@Welddotcom 4 жыл бұрын
Hopefully getting one soon
@michaelvtx1 3 жыл бұрын
Great job! I do miss Bob’
@Welddotcom 2 жыл бұрын
Us too! But he'll be back!!
@gorillaxrich 4 жыл бұрын
Great demonstration's...
@DavidNJ1 4 жыл бұрын
How do the MTS 225 and MTS 275 compare? Is the MTS 225 so small water cooling isn't as useful? Would pulse MIG have been useful?
@hockeygod0583 4 жыл бұрын
“Good and CaSiStEnT” - man cub 2020
@EngineeringAndRestoration 4 жыл бұрын
You know, I was worried that I would stop watching Weld.com once Bob ceased to be a part of the channel. I find myself really enjoying the content with the Man Cub. Keep it up man this channel is still going strong!
@bazkeen 4 жыл бұрын
Hey Man Cub your skills are improving. Weldings not too bad either😄😄. Keep it up
@hectormiguel9201 4 жыл бұрын
En Soldadura Mig, No importa que tan buena sea tu maquina si no tiene una exelente liner hose y control de polaridad. Una mquina China podria superar a una Miller .
@dieselphiend 4 жыл бұрын
I'm a Boilermaker. We do a lot of scratch start Tig welding, so we don't have any pedal. In fact, I've never used a peddle, so it always sort of perplexes me why people use them so frequently. I understand it's to control your heat, but you always have the option of moving faster, or adding more metal, or weaving, or simply stopping and waiting, without a pedal, so why are they so popular?
@robbieburns1664 4 жыл бұрын
A pedal is good for welding thinner materials. Better control for starts and tapering down stops, crater filling, etc. It would be hard to weld razor blades together or aluminum cans without a pedal. Likewise and more on the practical side, guys doing a lot of custom detail work with an aim for spectacular cosmetic appeal, e.g., some of this custom aluminum intake manifold work available. You can do a lot with only scratch start, like what you do and what is done a lot in the field, but a pedal does have certain advantages in the shop. I've used both methods. Today I wouldn't buy a tig machine sans pedal.
@chucksgarage7165 4 жыл бұрын
My Everlast mig welder has given me a lot of problems. Luckily it was under warranty. Had to ship it back because they only have 2 service centers in the country. Stick with Miller Lincoln or Hobart.
@marklugo6002 4 жыл бұрын
Which MIG welder and what is wrong with it?
@chucksgarage7165 4 жыл бұрын
Mark Lugo page Power i-MIG 200E. The main problem was the gas solenoid would stick and I would lose a whole tank of shielding gas. There was something else too but I can’t remember. It was about a year ago. The E on the end of the model number stands for economy.
@chucksgarage7165 4 жыл бұрын
Chris Stevens yep. I watched several reviews and they were all favorable. But not long term endurance tests.
@marklugo6002 4 жыл бұрын
@@chucksgarage7165 Yes, it is an entry level. But I've had new other brands solenoids stick, usually from debris getting into the solenoid from rust in the tank or moisture in the Argon mix. The good news is that they are completely serviceable and the 200E can usually be customer fixed rather than sending it in. The solenoids can be cleaned out and even "renewed" with little effort. A single board design makes repair quick and easy. Sounds like it just needs a good cleaning out. You can also install a dryer inline. Jody form Welding tips and tricks showed people how to build one a few years back because it is a real problem in certain areas of the country.
@marklugo6002 4 жыл бұрын
@@chucksgarage7165 If the units did not hold up, there's no way Everlast could offer a 5 year warranty for the past 12 years. And if we didn't stand behind our warranty terms, Everlast would have a lot more complaints. BTW, all companies have complaints and problems if you look for them, similar complaints, and similar issues. A lot of warranty problems stem from customers failing to read the terms of the warranty and expect Everlast to deliver something outside of the stated warranty. Everlast's terms and warranty are easily found on the website, and stated very plainly. If they do not want to follow the warranty terms, or the process of contacting customer support before sending it is on them. Just follow the directions, and the warranty goes pretty smoothly. When appropriate, Everlast even can ship a replacement part out rather than ship it in on many models that have gone digital or gone to a single board design and can save downtime. But again, just following the directions and terms outlined in the warranty goes a long way. Most complaints are by people who don't follow the basic process and want to jump ahead without going through basic diagnosis over the phone, or warranty repair process.
@Just1GuyMetalworks 4 жыл бұрын
Great review 😁! I've been eyeballing them Everlast machines, they're not so over priced like their blue compatriots 😊. Thanks for the share👍🙂👍.
@Factory400 4 жыл бұрын
They are made in China, no? Blue is a USA machine. Choose your battles wisely - China will OWN every market if your only concern is price.
@Just1GuyMetalworks 4 жыл бұрын
@@Factory400 I think they originated in San Francisco.
@chrisparker9886 3 жыл бұрын
Blue is not a USA machine! Do some research!
@replyhere590 Жыл бұрын
@@Factory400 Even when assembled in USA, many parts and boards come from good ole Cathay. I am new to welding (searching for the right machine for my restaurant, farm and other low grade repair, etc, needs) but I have observed things in this profession on line and in conversation with experienced welders, for a long time, and it seems to me that tech upgrades are often more frequent and cutting edge in the direct from China machines. Reliability does seem to be a big concern. I am looking hard at how companies handle customer service when things DO (and they will) go wrong. What are their return policies, cost of consumables, etc, etc? Learning all the time, and I appreciate forums like this one, a lot!
@Factory400 Жыл бұрын
@@replyhere590 My point is made. The consumers demanding "cheaper!" for decades..... now even USA manufactures are no longer USA manufactures. They can't even if they wanted to because most of their vendors have moved to China
@davesmith8936 4 жыл бұрын
Good job ManCub!
@notanymore9471 Жыл бұрын
We’re you using c25 for spray arc? If so I’m surprised since usually you still get some short circuits with that gas and I didn’t hear any. Impressive!
@lenro8790 Жыл бұрын
nope, he was using 95/5
@stuartandrews4344 4 жыл бұрын
Shame we can't get this in the UK!
@replyhere590 Жыл бұрын
You showed this 225 machine welding with 6010 Stick. The EL site where the 225 and 275 specs are compared to the Miller 220 and ESAB 205, does NOT show the 225 as 6010 capable, only the 275. Granted EL is no standout for accuracy/grammar/completeness with regard to their site and its documentation, but that would be a big miss. Comment?
@LextechLighting 4 жыл бұрын
I dunno, I’ll have to test it and see. Send it over.
@Welddotcom 4 жыл бұрын
Maybe once all the social distancing is over well host a little weld party
@fabianmoya9896 3 жыл бұрын
How is this welder holding up?
@MAC_6.7 4 жыл бұрын
Where’s bob?
@Welddotcom 4 жыл бұрын
Social distancing in KS.
@MAC_6.7 4 жыл бұрын
Weld.com need more Moffat lol
@rickjay7455 4 жыл бұрын
Great demo thanks
@shmengheorghe 4 жыл бұрын
That's one bad ass green machine💪💪💪
@anthonymarino4260 2 жыл бұрын
nice demo thanks
@chrisparker9886 3 жыл бұрын
How do you think this machine compares to a multimatic 220? I'm just curious as to your opinion. If you had to choose between the two, which one would you pick?
@dREaDneck_Moto 4 жыл бұрын
So, the shot of the 7018 chipping slag is not the same bead as the cleaned up shot, look at the end of the weld, it's about 1/2" from the end of the joint with slag, then cleaned up it's to the very end of the joint. Might want to double check your edits.
@replyhere590 Жыл бұрын
dREaDneckFab: Also, the initial comments by the channel (click on "...more" on the left side) refer to the machine being reviewed as the model 275 instead of the actual 225 reviewed here, apparently recycled a bit too fast from that review 😮.
@T0X1C89 4 жыл бұрын
How about a review of the Lightning MTS 275. One doest not seem to exist, a few channels posted videos that they recieved it but no operating videos
@Welddotcom 4 жыл бұрын
We posted one a couple months back
@victory5056 4 жыл бұрын
Miller for the win!
@jvmiller1995 4 жыл бұрын
if you like to throw away a extra grand or more than okay.
@williamandrebecca 4 жыл бұрын
Good video, good content, looks like a nice machine!
@shinigami1265 3 жыл бұрын
For someone starting on welding to make a side income, should buy the Forney or go straight and invest on this?
@guillermonieri4203 4 жыл бұрын
Thank you.
@dc85337 3 жыл бұрын
I noticed that you really clean the aluminum plates to get it really clean - but I didn't see you clean the rod with abrasives then degreaser. Isn't that also important?
@staceyswelding 2 жыл бұрын
Hey nice video but my question from a pipe welder running 6010 root to 7018 hot & cover how does that machine run without switching every time you go from 6010 to 7018
@darkforcex7362 4 жыл бұрын
I have a 185 everlast. But I think it's time for an upgrade. Thank you for your review
@Welddotcom 4 жыл бұрын
You're very welcome
@mb-fs1yo 4 жыл бұрын
Show the backs of the welds
@memecentral2460 4 жыл бұрын
Wheres bob
@bleuxmoose 3 жыл бұрын
Would you recommend the mts 225 or 275? What's the main advantages or disadvantages of the two? There is $500CAD difference between the two... Is it worth upgrading to the 275? Id be using it for starting a side hussle welding and fabricating, when Im not at my 9-5 building custom Aluminium boats.
@billjones6124 Жыл бұрын
I don’t know why but my friend try to show me how good Everlast plasma cutter are and he couldn’t even cut 3/8 on a 60 amp unit!!??
@FixItStupid 4 жыл бұрын
Thank You
@jonbooth4416 4 жыл бұрын
Just pulled the trigger on this rig last week. Supposed to be here tomorrow. Can't wait to play with it!
@vitaliypetruk3872 4 жыл бұрын
Post back with updates
@blackdiamondrealty8046 4 жыл бұрын
Did yours show up?
@vitaliypetruk3872 4 жыл бұрын
Any updates?
@replyhere590 Жыл бұрын
@@vitaliypetruk3872 Looks like he loved us and left us.
@yesshewelds2425 4 жыл бұрын
Have you ever tried anything from Harbor Freight (Chicago Electric, Vulcan, etc)? I stay close and want to buy my own starter machine to get more practice since summer school is cancelled. I want to try to get a MIG since flux takes 120v. Any suggestions? Thanks in advance! *Great review, by the way!*
@replyhere590 Жыл бұрын
Yes She: warranty is only 90 days on HF machines, 20% restocking if you return, expensive add on warranty cost (a guide to what they think of reliability, maybe?). Northern Tool has some good deals, their brands and others. Looking hard at Everlast, for sure. But there are many many cheap welders on Amazon, some might say a jungle. Mind your bucks and study hard.
@replyhere590 Жыл бұрын
Also, do your comparison shopping. Some things at HF are deals--for example I just bought 2 ground clamps at HF (to use on my battery charger--much better than the typical sissy OEM clamps) for HALF the cost of the same ones at NTool. Shop, learn and save.
@ej7431 2 жыл бұрын
Great Video
@seephor Жыл бұрын
Why does Everlast have "Not E6010 Rated" even though you were able to find it in the stick menu?
@fabiodimare8558 4 жыл бұрын
Good video!
@jeffsorenson4342 2 жыл бұрын
Respect
@rolandoriggio5026 4 жыл бұрын
weld.com What's the best MTS @ 125v for home use?
@mrmidnight32 4 жыл бұрын
I’ll take my 2 separate machines for $600 less... AHP/Prime weld TIG + Everlast iMiG 200... $1,400. If one goes out you don’t lose both. Like you would with a combo machine if it shits out.
@Game-Over-U-Tube 4 жыл бұрын
If you are a mobile tech, have fun lugging around 4 different machines depending on the job. I'll take a multiprocess machine for that. Plus, Everlast also has a bunch of single process machines for cheaper, you just pay more for the convenience of having it all in one box.
@garymoranville3337 Жыл бұрын
no pulse
@mrmidnight32 Жыл бұрын
@@Game-Over-U-Tube if you’re mobile sure. But that’s not my case. And if you’re mobile and not running a generator welder you’re already fuckin up.
@melvinmariott8609 4 жыл бұрын
Now that is a cool machine all in one welder. How much is that?
@paulmcdonald3570 4 жыл бұрын
Melvin Mariott 2k
@Welddotcom 4 жыл бұрын
It's currently 2k, but it's normally 2600.
Jason Derulo
Рет қаралды 36 МЛН
Repair Geek
Рет қаралды 33 М.
HourGlassIngenuity
Рет қаралды 2,8 МЛН
Everyday Vic's - Honest Reviews
Рет қаралды 5 М.