Cox Hose Reel - Complete "How-To" Setup with OG High Pressure Hose

Рет қаралды 30,016

Күн бұрын

Wall Mount Hose and Reel Upgrade Kit
www.obsessedgarage.com/produc...
Coxreels Hand Crank Hose Reel:
www.obsessedgarage.com/produc...
For more insight into my life and business become a member of Inside the Hex: www.obsessedgarage.com/pages/...
Join Our Closed Facebook Group of Like-Minded Obsessed People: / obsessedgarage
Website: www.obsessedgarage.com
Obsessed Garage Store: www.obsessedgaragestore.com/
Gear We Use Everyday (Cameras, Computers, Etc.):
www.amazon.com/shop/obsessedg...
Podcast: obsessedgarage.com/podcast/
Facebook: / obsessedgarage
Instagram: / obsessedgarage
Twitter: / obsessed_garage
Stay tuned for more crazy!
Timestamps
0:00 - Into
0:40 - Tools Needed
1:01 - Handle Install
2:12 - Hose Install
6:13 - Jumper Hose Install
7:26 - Final Lookover
7:39 - Outro

Пікірлер: 34

@denzilsnaggs8683 Жыл бұрын

So I'm about 1 minute into ur video and brush.. I must say I haven't heard a thing u said , I'm soooo focused on how sweet those cabinets are.. I love the light placement..😍🇹🇹

@goatrosae7665 Ай бұрын

Great instructions, bro! You're the best!

@dalesuggs3658 Ай бұрын

Very informative. Thanks

@Ara_Milan 2 жыл бұрын

Thanks ! very helpful , Question is the Mjjc foam cannon connecting to OG mosmatic sprayer gun? and can you install with shipping i dont like to build by my own

@bobekdj 2 жыл бұрын

Helpful video guys. One bit to add, pressure test everything and the connections before coiling up hose on the reel so it’s easier to see if the inner connection or anything else leaks. Also since I’m sure other will notice, if you swapped your wrenches for the handle install that fancy sonic ratcheting wrench would have made short work of the nut for the handle. I’m not sure why the plastic handle has so much side to side slop in it, but some plastic washers or 3D printing and it comes together awesome (I chose the latter with some black filament). Can provide the source file or print for a small fee if anyone is interested. Keep up the great work!

@michelfortin7055 2 ай бұрын

LOL, you read my mind. I was going to post the same about leak checks before coiling and the ratchet wrench.

@jesseg4154 Жыл бұрын

I’d like one for 5/8” flexzilla garden hose. Do they make one for that? Alls I can find is high pressure.

@lucasneves4357 Жыл бұрын

Hey I purchase cox reel but is 1/2 and my hose is 1/4 what I’m supposed to do for adapter it ?

@michelfortin7055 2 ай бұрын

My hose has no swivel at either end. Can I still mount it on the reel? I realize that I will have to turn the hose when I screw it in but will it then be a problem to operate the reel?

@crispcarguru303 Жыл бұрын

any reason when buying these kits why there is a quick disconnect on both side of the hoses? A Included adapter would be nice or take it off on the swivel side.

@bobbybarnes1652 2 ай бұрын

Because most hoses are used to connect a pressure washer (with a QD adapter intalled) to a short gun or wand (with a QD adapter).

@jasondangelo6659 Жыл бұрын

I have the hose with a quick connect on both sides. It’s on really tight. Is it safe to unscrew it, so I can use it for the inside of the reel?

@ObsessedGarageShorts Жыл бұрын

Yes, I would recommend taking one of the couplers off. It's going to be very tight so you might even want to watch our video we did about "terminating a high pressure hose"

@PaulRosasSF Жыл бұрын

I have been trying to get the coupler off for a while now I finally gave up. It's too tight.

@JoseLuisToledo 2 жыл бұрын

Can I install my Uberflex hose with m22 on a hose reel??

@ObsessedGarageShorts 2 жыл бұрын

There is a way to do that but it's a little complex. I would Reach out to support@obsessedgarage.com on that one.

@kylepogue8443 Жыл бұрын

Did you ever figure it out?

@jessefig5281 Жыл бұрын

This is done before mounting it to the wall or after? My kit did not come with mounting screws.

@ObsessedGarageShorts Жыл бұрын

I would recommend putting the hose on after wall mounting or you'll just be fighting to hold the entire thing up. Also, the reel itself dose not come with mounting screws. If you got the stainless mount it will come with screws.

@bobbybarnes1652 2 ай бұрын

No idea why people think they would or should including mounting hardware. They don't come with mounting hardware because they have no idea where or how you are going to mount it. If they had to include hardware for every possible mounting location or situatoion, we'd have to pay $50 more, then only use 10% of the included mounting hardware.

@dglo6985 9 ай бұрын

Is it normal for the reel to move back and forth as if it has play. When reeling the hose the Cox reel moves back and forth more so on the side with the handle.

@ObsessedGarageShorts 9 ай бұрын

Its normal for there to be a little play but if you thing yours is more then normal I would send a video to out instagram page and they can tell yours is okay.

@michaeljohnson1909 Жыл бұрын

I just got my Og spec v1.0 hose today ultimate kit 100’ and there is “NO END” that is swiveling. I took off my kobrajet grey non marking and it swivels instantly. Super disappointed how can I reach out for help I tried looking on the site

@ObsessedGarageShorts Жыл бұрын

Email support@obsessedgarage.com, and they will take care of you!