Get 15% off a SweetNight Prime Mattress with code CRAFTED15% : spn.so/hwmtvbsw

I hope you put a shop sink somewhere. That steel sink looked so useful

You may want to add a paper towel under all your moisture sensors. The paper will absorb all of the water, so even a small stream of water will be detected by the sensors :D

I like the shut off system but Ball valves like that aren't meant to be cycled that often. You will likely find that at some point in the future even with the valve fully off that water is still flowing past the valve due to excessive wear in the internal plastic valve seats.. You can mitigate this in part by installing an all Brass valve but you will likely still have to replace O rings on the valve stem once a year if you are cycling this thing every week. If I understood the video correctly you likely filmed this months ago so you should probably go cycle that valve by hand to see if it's loose and or leaking internally.

I recommend installing the electronic shut-offs at any tank-style water heaters, as well. We had the water filter cannister split open. Even though I had turned off the main, there was enough back-pressure from the (three!) tanks to contribute to the flood. Flooded a computer, scanner, and two printers.

Saw this and was like Uggggghhhhhh. Dealing with flooded basement now from recent storms here.

Thanks for the tip on the water shut off. Same reason I have not installed one so far. Stay safe.

I look forward to this kitchen series even though it was a disaster that started it. All the best.

Very interesting series man! Big thumbs up from Sweden. Don’t mind the haters.

Not losing your guitars in that moisture and humidity was a miracle.

Congrats on 1000000!❤

sorry to hear about the leak, but enjoyed seeing the fix!

Hi 👋, Great idea with the shut off valve, Plus I enjoyed listening to this and watching you as there was no adverts, Phil from the moulin France.

The flooding of your shop kit hen was unfortunate, however you recovered smartly. I really like how you researched a proper solution for protecting your shop, and kitchen from flooding in the future. I think that I will do the same for my home. Well done!

Man am I glad to live in a subtropical climate (south-east Queensland, Australia) where it never gets cold enough for snow, or for things to freeze.

Damn! What a headache, Johnny! 😬 I'm happy everything is solved! And, BTW, servos are a lot of fun, I love making stupid rc things with them, just to play... 😂 Anyway, stay safe there with your family! 🖖😊

Yeah that winter storm was something else. I and 95% of the people I work with took that Friday off because of the cold temps and the Blizzard we got here in NE Ohio.

Dude that water moisture thing is so cool i'm buying one i'm so buying one this will rescue my home! Dude thank you so so much

And here I thought that Johnny was immune to swearing...

I have Yolink products in my house. Love them!

If you've added the water shutoff device to your smart "house" stuff and you have Alexa running routines, you probably have an Alexa/Echo in your shop or office space. If that is the case you should disable the timer functions of when to turn it off and on and instead link it to a voice-trigger routine. For example if you say "Alexa, I'm leaving" she will go in to Guard Mode and listen for running water, smoke alarms, and breaking glass. Add to the routine she triggers with that to turn the water off. Then when you come back you say "Alexa, I'm back" and you have a routine set to run when Guard Mode deactivates to turn the water on. If you don't do it this way you are going to show up early some day or want to stay late and the water will turn off anyways. Also, this way the water always turns off when you leave and on when you come back (even over night). Source: I have routines setup to do something very, VERY similar in my house.

That’s actually a really nice industrial sink. I don’t doubt you could find a use for that in the shop.

I thought your water heater froze up because you lost power... an electronic shut off valve won't help in the same situation...

nice Chapman baritone you got there

Not sure if 6 months is enough time for it to dry. Maybe stick it in a jar with rice

why would you use a plug in shut off valve if the water lines freeze when there isn't power? I get that I would at least minimize the damage but why not solve the issue? or have something that closes when there is water AND when you lose power?

Sorry for your disaster. All your work Thanks. Lowe's helping out. It shows. Someone cares

Yay for YoLink @ 11:47 I use their products very often :) Its a smart home system that doesn't use WiFi, it uses a long range, low power pulse of data to control devices. You can also get sensors linked to that hub for temperature and humidity as well, along with many other devices.

Shutting the water off every weekend can weare out the valve. Since you got it on a safety switch its unecessery to shut it of constantly

I wait everyday for your video.

Clever shutoff solution, but given the recent frequency of southern climates getting freezing temps, I would still move the water heater and pipes to a conditioned space or condition the space around the water heater and pipes. These freezing events are going to be more frequent and will likely get worse in the future.

SharkBite's are not rated for locations that you cannot get to or see. I really recommend purchasing the crimp tool for the pex clamps.

Excelente trabajo saludos 👍👌

You know. Simpli safe makes water sensors. I highly recommend them in all your wet areas. But that valve switch works well too.

What this series has taught me is that the previous owner was lazy and tried to take the easiest routes of everything.

Why wasn't recommended this video 😢 I'm subbed

Bet some fellas 😍 the thumbnail on this vid. 😉

Water is the worst! I suppose fire is pretty shitty too, but yeah, water. All your stuff is still there only is wet and wrecked! UGH. I feel your pain. That shut off unit is cool; I saw one like that on a The Build Show with Matt Reisinger (sp?).

Big fan of the channel but I also work for SimpliSafe, you should get some of our Water Sensors to add to your system, great for getting ahead of situations like this!

You should install your new flooring before you install the lower cabinet's!

I thought Helix was your go to mattress.

Rookie mistake - how can a stud sensor possibly work if you are holding it?

What about the black mold to follow

Sorry Man that’s a bummer but I know you will make the best of it. Slainte, DC🍀

Why is one water valve in the cabinet to right of the sink base?

we got a sweetnight and its epic

burying sharkbites in the wall immediately following a water leak.. bold move, cotton!

Do not buy a box mattress. Get a tempurpedic. Best mattresses out there. Or just get a cheaper memory foam mattress like Ashley furniture. I have one and I put a memory foam topper ontop of it that is just like a tempurpedic bed. Hurt back too much to sleep on those box mattresses. Paid $1300 for a Casper one

What state are you located in? I'm in Minnesota where it gets really cold and I'm lucky this hasn't happened to me. Great idea with that auto turn off device!

Where’d you put the new water heater?

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

Why did the previous owner think it was a good plan to put plumbing in an unheated space? What other questonable choices did they make that will surprise you in the future?

Simplisafe didn’t throw in a water leak sensor as part of the brand deal? 😂

This is in your shop?

You really should have removed any and all drywall that was wet and/or showing mold growth. It's great that you neutralized it, but if it's embedded, chances are highly likely that it is on the backside of the drywall. Then covering it back up with cabinets creates the perfect dark environment for the mold to thrive and start to grow again. I'm certified in mold remediation, so I'm not just blowing smoke, just looking out for the safety of people in their homes and work spaces.

Was that at your new workshop ?

That surprise face thumbnail.. idk man

Is this the one time on a KZfaq thumbnail that it was justified to make that face? Great work on the renovation sir.

Yikes! 😮 my dad was a kinda old school philosopher, he’d say “The lessons you learned the hard way are the lessons you never forget” sorry this was a hard pill to swallow.

Is this the new shop or your old shop

Why was there a water heater in a cold zone ?

my birthday lol dec 26

Homeowner special

so pex pipe and studs are same 🤔🙄

I did not realise you had done so much work in the upstairs at the shop. Talk about a pain in the butt.

1:28 Ceiling bewbees...Yes, I am 10 years old.

I remember that day how is everything going to take a shower and understanding my bathroom was froze and I was in Jonathan County those McDevitt middl oh, I remember that day all my pipe froze at stairs in the shower and I’m gonna take one another 10 minutes and realize the hot water not running but the cold with the running and I was in the middle of the county and Johnson county in the state who

If you mess with the Wu logo... liquid swords are coming...

are you a roadkill fan?

i hope everything goes ok but its the middle of summer was this video made a wile ago?

Iam from India I want to work with you

I wish your videos were at least 30min long. I love it so much. PS. You are so handsome.

You know I really liked your channel when you renovated the shop and built the backyard home. Now its like sharting down the hole. What in the world happened? Maybe the dealer is selling some bs. WOW. Just shart. YAHHHHHHHH😢 PS DONT BE.A AIYU😊

That valve on the water main is not designed to be used this frequently.

Has anyone told you that you look like AJ McLean from the Backstreet Boys? 😂

Why the f would you trust a stud finder when you know you're above a tap and there's a vertical line of water running right behind where you're gonna drill..... That's idiotic.

Christmas? Why is this coming out now?

Yea, wait till you lose power for 48 hrs like we did in sub freezing weather. None of that technology will help.

I'm really sick and tired of mattress sponsorships. You won't know if the mattress agrees with your back until at least 6 months of use. Yes there is a warranty but you can't just return the mattress whenever you want for a full refund. Each day that you keep the mattress decreases the amount of refund you can receive to have the mattress warrantied. I spent 5 grand on a purple mattress and sometimes it hurts sometimes it didn't but then after about 6 months it consistently started hurting and there was not a damn thing I could do. No one buys them because everybody knows about this trap.

Homie I love your content but why does ur take 6-7 MONTHS for you to get some videos out? That just seems like a crazy long time for a 10-20 minute video.

If you're not a sponsored KZfaqr please get a leak defense or water cop shut off valve. Not this janky one he suggested

What's up with the cringey thumbnail dude? I thought you were better than that

Mickey mouse job with that sharkbite stuff , just buy a crimper man.

very cringe thumbnail