Making Simple Dust Collection Switcher // Homemade Blast Gate

Рет қаралды 148,461

2 жыл бұрын

In this video you will see how I making simple dust collection switcher. Without fancy tools, just from plywood, flexiglass and glue I made great switcher for dust collection, which allows to connect many tools to one vacum cleaner. Useful part for every workshop, saves time and keeps clean your space.
Cheap Drill for Woodworking; www.banggood.com/custlink/m3G...

Пікірлер: 45

@Frejjan 3 ай бұрын

Never, ever, get between this guy and his superglue

@CraftyDude 3 ай бұрын

😀👍

@Mr2at Жыл бұрын

Thats it!, thats the design i need. Nice build and vid.

@wolfman75 2 жыл бұрын

Great Idea!!! Turned out awesome!!! Thanks for sharing!!! 👍😎🙏🤘

@CraftyDude 2 жыл бұрын

thank you👍😉

@Sapis 2 жыл бұрын

Sehr schöne Arbeit, einfach Genial👍👍👍

@CraftyDude 2 жыл бұрын

Danke schön🙂👍

@FrancoisDUGUET-pq7wh 3 ай бұрын

Wonderful. But don't use it. High risk of fire by electrostatic discharge. Or use electricity conductor material to build it.

@Sapis 2 жыл бұрын

Habe den Staubsammelmischer nach deiner Ausführung gebaut, ich war erst skeptisch ob die Scheibe und die Absperrschieber verschmutzen ........ nein das funktioniert super .👍👍👍👌

@CraftyDude 2 жыл бұрын

Es muss funktionieren👍😉

@fabricedidiot4349 Жыл бұрын

Thanks for your video. I made it in my small workshop and it's really great.

@CraftyDude Жыл бұрын

👍🙂

@CraftyDude 3 ай бұрын

What??

@siscugeorge3385 2 жыл бұрын

Nice bro, very very nice. Good job. I will do this for my small workshop. thx

@CraftyDude 2 жыл бұрын

Great👍thank you🙂

@zolatanaffa87 2 жыл бұрын

really ingenious, congratulations

@CraftyDude 2 жыл бұрын

Thank you👍🙂

@kumkwat 3 ай бұрын

Надо было муфты напополам пилить.... Не русский!😂

@uncledope77 2 жыл бұрын

I like it & it's really cool 😎 The plexiglass should have some type of round brace in the middle to stop the flexing, it's just a thought 🤔

@CraftyDude 2 жыл бұрын

Thank you👍 flexiglass is not necessary at that place, can be used plywood plate, same as in bottom🙂

@uncledope77 2 жыл бұрын

@@CraftyDude The plexiglass is & looks cool. It's nice to see the dust moving through the system. I just noticed the plexiglass flexing & I believe a dowel brace would help support it. But it's not mandatory, it was just a thought. Thank you for your reply.

@murrayhill9000 9 ай бұрын

@@uncledope77 Instead of a dowel, try inserting a 1/4" flat head screw from the back and long enough to touch the plexiglass. This would keep the plexiglass from flexing and compromising its seal and the metal bolt could be grounded from the back to discharge the static electricity built up by the friction of the air and dust. It would have a dual purpose. Just a thought. Great video and a nice project.

@sitgesvillaapartmentneilsc7924 4 ай бұрын

Brilliant, any plans anywhere please ? seems to work flawlessly and allows for the blast gate to be near the hoover where it should be for maximum air flow, if anyone is worried about flexing simply add a PRV into the chamber to stop any risk of buckling or implosion orover revving of the suction device.

@helmutfischer8014 3 ай бұрын

😊😊😊😊😊😊😊😊888i 😅😅😅😊

@rolands4175 Жыл бұрын

👌

@steveschneider8436 Жыл бұрын

Love the build. Any issues with build up of dust in the slide gates? Was thinking a relief slot against back wall on each gate to make self cleaning?

@CraftyDude Жыл бұрын

Great idea to make self cleaning slot, sometimes it get filled with dust and valve stucking, then I have to clean it manually 👍

@johncollins9113 2 жыл бұрын

Are there any plans for this it looks amazing

@CraftyDude 2 жыл бұрын

no i didn't make plans for this project, it's not difficult find out measurements, main thing is pipes diameter which you will use for system

@user-gd8rv2kp4x 3 ай бұрын

👍👍👍

@marcusviniciusbernardo6341 Жыл бұрын

Hello friend . Where can I buy this double sided tape? I really need her. Success on your channel.

@CraftyDude Жыл бұрын

Hello, You can find it in any materials store

@TeranceJohn Жыл бұрын

What is the glue that you were using in this project? Thanks!

@CraftyDude Жыл бұрын

For gluing plastic parts I used ca glue,

@terryt2910 2 жыл бұрын

I like this. Thanks. If I build it, it will probably have fewer ports. My concern in with drilling and screwing into, what liked like, 1/4 in plywood. Yikes!

@CraftyDude 2 жыл бұрын

Great, its good to have more ports even no needed at a time, maybe later will decide to connect more tools🙂

@josephking6515 4 ай бұрын

I am curious as to your concern about screwing into 6mm plywood? There is nothing nefarious about my question just curiosity and for education, that's all. Ah yeah I realise your comment was 2 years ago but maybe....... 🤷‍♂️😁

@terryt2910 4 ай бұрын

@@josephking6515 Yeah, I had to watch it again to see what I was referring to. Personally, I don't think I could drill that many holes into 6mm (even thinner than true 1/4") without busting through. And if I did manage, I can't see me getting the screws in without blowing out a side or at least having screw threads sticking out. Anyone who can do that, free-handed, is a lot better at it than I am.

@chrisallen2005 4 ай бұрын

@@terryt2910I guess you could use thicker material. Duh.